Effect of Interfacial Interaction on the Conformational Variation of Poly(vinylidene fluoride) (PVDF) Chains in PVDF/Graphene Oxide (GO) Nanocomposite Fibers and Corresponding Mechanical Properties

2019 ◽  
Vol 11 (14) ◽  
pp. 13665-13675 ◽  
Author(s):  
Jung-Eun Lee ◽  
Youngho Eom ◽  
Young-Eun Shin ◽  
Sang-Ha Hwang ◽  
Hyun-Hyub Ko ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Vinylidene Fluoride ◽  
Interfacial Interaction ◽  
Poly Vinylidene Fluoride ◽  
Nanocomposite Fibers

Preparation and Characterization of Poly (vinylidene fluoride)/Graphene Oxide Composite Nanofiber for MF Application

2013 ◽  
Vol 726-731 ◽  
pp. 1715-1719 ◽  
Author(s):  
Wei Dong Chen ◽  
Hye Min Jung ◽  
Won Gi Jang ◽  
Byung Pyo Hong ◽  
Hong Sik Byun
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Composite Membrane ◽  
Vinylidene Fluoride ◽  
Oxide Composite ◽  
Electrospinning Method ◽  
Excellent Mechanical Property ◽  
Poly Vinylidene Fluoride ◽  
Ft Ir ◽  
Pore Properties

In this paper, poly(vinylidene fluoride) nanofiber was prepared by an electrospinning method. Graphene oxide sheets was obtained via filtration from graphene oxide aqueous solution which synthesized by Hummers method. By sonication, a homogeneously dispersed and well distributed poly acylic acid and graphene oxide nanosheets solution were obtained, and this can be used to modify the neat poly (vinylidene fluoride) nanofiber membrane for not only increasing the hydrophilic properties but also improving the mechanical properties. The poly(vinylidene fluoride)/graphene oxide composite membrane was characterized by SEM, FT-IR, pore properties and mechanical properties. The composite membrane showed an appropriate pore size, excellent mechanical property comparing with pure poly(vinylidene fluoride) membrane. The results showed the membrane could be feasibly used as a MF membrane.

Piezoelectric β-polymorph formation of new textiles by surface modification with coating process based on interfacial interaction on the conformational variation of poly (vinylidene fluoride) (PVDF) chains

2020 ◽  
Vol 91 (3) ◽  
pp. 31301
Author(s):  
Nabil Chakhchaoui ◽  
Rida Farhan ◽  
Meriem Boutaldat ◽  
Marwane Rouway ◽  
Adil Eddiai ◽  
...  
Keyword(s):  
High Efficiency ◽  
Vinylidene Fluoride ◽  
Research Work ◽  
Research Area ◽  
Interfacial Interaction ◽  
Tetraethyl Orthosilicate ◽  
Poly Vinylidene Fluoride ◽  
Carbon Nanofillers ◽  
The Impact ◽  
Advanced Applications

Novel textiles have received a lot of attention from researchers in the last decade due to some of their unique features. The introduction of intelligent materials into textile structures offers an opportunity to develop multifunctional textiles, such as sensing, reacting, conducting electricity and performing energy conversion operations. In this research work nanocomposite-based highly piezoelectric and electroactive β-phase new textile has been developed using the pad-dry-cure method. The deposition of poly (vinylidene fluoride) (PVDF) − carbon nanofillers (CNF) − tetraethyl orthosilicate (TEOS), Si(OCH2CH3)4 was acquired on a treated textile substrate using coating technique followed by evaporation to transform the passive (non-functional) textile into a dynamic textile with an enhanced piezoelectric β-phase. The aim of the study is the investigation of the impact the coating of textile via piezoelectric nanocomposites based PVDF-CNF (by optimizing piezoelectric crystalline phase). The chemical composition of CT/PVDF-CNC-TEOS textile was detected by qualitative elemental analysis (SEM/EDX). The added of 0.5% of CNF during the process provides material textiles with a piezoelectric β-phase of up to 50% has been measured by FTIR experiments. These results indicated that CNF has high efficiency in transforming the phase α introduced in the unloaded PVDF, to the β-phase in the case of nanocomposites. Consequently, this fabricated new textile exhibits glorious piezoelectric β-phase even with relatively low coating content of PVDF-CNF-TEOS. The study demonstrates that the pad-dry-cure method can potentially be used for the development of piezoelectric nanocomposite-coated wearable new textiles for sensors and energy harvesting applications. We believe that our study may inspire the research area for future advanced applications.

scholarly journals Efficient interfacial interaction for improving mechanical properties of polydimethylsiloxane nanocomposites filled with low content of graphene oxide nanoribbons

RSC Advances ◽  
2017 ◽  
Vol 7 (36) ◽  
pp. 22045-22053 ◽  
Author(s):  
Neng-Jian Huang ◽  
Jing Zang ◽  
Guo-Dong Zhang ◽  
Li-Zhi Guan ◽  
Shi-Neng Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Filler Content ◽  
Interfacial Interaction ◽  
Solvent Free ◽  
The Other ◽  
Graphene Oxide Nanoribbons ◽  
Free Process ◽  
Reinforcement Efficiency

GONR-filled H-t-PDMS nanocomposites were fabricated by using a facile solvent-free process, and the reinforcement efficiency of GONRs at low filler content is superior to those of the other carbon nano-fillers.

The Irradiation Crosslinking of Poly(vinylidene fluoride-​chlorotrifluoroethylene)

2014 ◽  
Vol 716-717 ◽  
pp. 7-10
Author(s):  
Jian Chen
Keyword(s):  
Mechanical Properties ◽  
Storage Modulus ◽  
Ultraviolet Irradiation ◽  
Vinylidene Fluoride ◽  
Loss Modulus ◽  
Great Influence ◽  
Poly Vinylidene Fluoride ◽  
Content Support

Vinylidenefluoride (VDF) and chlorotrifluoroethylene (CTFE) copolymers were crosslinked by ultraviolet irradiation, chlorotrifluoroethylene content has a great influence on the crosslinked copolymers, high CTFE content support more joint pots, the properties of the copolymer shows higher storage modulus, the loss modulus gets smaller. The copolymer mechanical properties gets much higher.

Three-Dimensional Graphite Filled Poly(Vinylidene Fluoride) Composites with Enhanced Strength and Thermal Conductivity

2020 ◽  
Vol 842 ◽  
pp. 63-68
Author(s):  
Xiao Zhang ◽  
Jian Zheng ◽  
Yong Qiang Du ◽  
Chun Ming Zhang
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Energetic Materials ◽  
High Performance ◽  
Vinylidene Fluoride ◽  
3D Structure ◽  
Three Dimensional ◽  
3D Network ◽  
Poly Vinylidene Fluoride ◽  
Polymer Bonded Explosives

Three-dimensional (3D) network structure has been recognized as an efficient approach to enhance the mechanical and thermal conductive properties of polymeric composites. However, it has not been applied in energetic materials. In this work, a fluoropolymer based composite with vertically oriented and interconnected 3D graphite network was fabricated for polymer bonded explosives (PBXs). Here, the graphite and graphene oxide platelets were mixed, and self-assembled via rapid freezing and using crystallized ice as the template. The 3D structure was finally obtained by freezing-dry, and infiltrating with polymer. With the increasing of filler fraction and cooling rate, the thermal conductivity of the polymer composite was significantly improved to 2.15 W m-1 K-1 by 919% than that of pure polymer. Moreover, the mechanical properties, such as tensile strength and elastic modulus, were enhanced by 117% and 563%, respectively, when the highly ordered structure was embedded in the polymer. We attribute the increased thermal and mechanical properties to this 3D network, which is beneficial to the effective heat conduction and force transfer. This study supports a desirable way to fabricate the strong and thermal conductive fluoropolymer composites used for the high-performance polymer bonded explosives (PBXs).

Sign in / Sign up

Export Citation Format

Share Document