scholarly journals Facile Preparation of Tilmicosin-Loaded Polymeric Nanoparticle with Controlled Properties and Functions

ACS Omega ◽  
2020 ◽  
Vol 5 (50) ◽  
pp. 32366-32372
Author(s):  
Jie Yu ◽  
Mingwei Wang ◽  
Rizwan Ahmed Bhutto ◽  
Hongyang Zhao ◽  
Martien A. Cohen Stuart ◽  
...  
Keyword(s):  
Polymeric Nanoparticle ◽  
Facile Preparation

Facile preparation of nanofiller-paper using mixed office paper without deinking

TAPPI Journal ◽  
2015 ◽  
Vol 14 (3) ◽  
pp. 167-174 ◽  
Author(s):  
QIANQIAN WANG ◽  
J.Y. ZHU
Keyword(s):  
Cellulose Nanofibrils ◽  
Ash Content ◽  
Raw Material ◽  
Mechanical Grinding ◽  
Microscope Imaging ◽  
Facile Preparation ◽  
Electron Microscope Imaging ◽  
Thermal Stability Of ◽  
Scanning Electron ◽  
Office Paper

Mixed office paper (MOP) pulp without deinking with an ash content of 18.1 ± 1.5% was used as raw material to produce nanofiller-paper. The MOP pulp with filler was mechanically fibrillated using a laboratory stone grinder. Scanning electron microscope imaging revealed that the ground filler particles were wrapped by cellulose nanofibrils (CNFs), which substantially improved the incorporation of filler into the CNF matrix. Sheets made of this CNF matrix were densified due to improved bonding. Specific tensile strength and modulus of the nanofiller-paper with 60-min grinding reached 48.4 kN·m/kg and 8.1 MN·m/kg, respectively, approximately 250% and 200% of the respective values of the paper made of unground MOP pulp. Mechanical grinding duration did not affect the thermal stability of the nanofiller-paper.

Thienopyrrolocarbazoles: New Building Blocks for Functional Organic Materials

2019 ◽  
Author(s):  
Dorian Bader ◽  
Johannes Fröhlich ◽  
Paul Kautny
Keyword(s):  
Building Block ◽  
Organic Materials ◽  
Building Blocks ◽  
Molecular Properties ◽  
The Family ◽  
Facile Preparation

The facile preparation of three regioisomeric thienopyrrolocarbazoles applying a convenient C-H activation approach is presented. Derived from indolo[3,2,1-<i>jk</i>]carbazole, the incorporation of thiophene into the triarylamine framework significantly impacted the molecular properties of the parent scaffold. The developed thienopyrrolocarbazoles enrich the family of triarylamine donors and constitute a novel building block for functional organic materials.

Thienopyrrolocarbazoles: New Building Blocks for Functional Organic Materials

2019 ◽  
Author(s):  
Dorian Bader ◽  
Johannes Fröhlich ◽  
Paul Kautny
Keyword(s):  
Building Block ◽  
Organic Materials ◽  
Building Blocks ◽  
Molecular Properties ◽  
The Family ◽  
Facile Preparation

The facile preparation of three regioisomeric thienopyrrolocarbazoles applying a convenient C-H activation approach is presented. Derived from indolo[3,2,1-<i>jk</i>]carbazole, the incorporation of thiophene into the triarylamine framework significantly impacted the molecular properties of the parent scaffold. The developed thienopyrrolocarbazoles enrich the family of triarylamine donors and constitute a novel building block for functional organic materials.

Iono-molecular Separation with Composite Membranes II. Preparation and characterization of polysulphone and composite nanoparticles

2017 ◽  
Vol 68 (2) ◽  
pp. 203-209
Author(s):  
Hussam Nadum Abdalraheem Al Ani ◽  
Anca Maria Cimbru ◽  
Corneliu Trisca-Rusu ◽  
Szidonia Katalin Tanczos ◽  
Adriana Cuciureanu ◽  
...  
Keyword(s):  
Chemical Species ◽  
Composite Membranes ◽  
Ammonium Persulfate ◽  
Operating Pressure ◽  
Polysulfone Membrane ◽  
Polymeric Nanoparticle ◽  
Molecular Separation ◽  
Copper Complexation ◽  
Molecular Separations ◽  
Methyl Pyrrolidone

This paper illustrates the possibility of producing iono-molecular separations using ionic colloidal ultrafiltration membrane of polysulfone synthetic solutions of cupric ions and nitro phenols through ultrafiltration assisted by polymeric nanoparticle composites based on polysulfone. In the present work, in order to reduce the operating pressure and increase the flow of water we are using the process of ultrafiltration through a polysulfone membrane in N-methylpyrrolidone 10% prepared by coagulation in isopropanol. The nanoparticles needed in colloidal ultrafiltration had been obtained through the immersion technique of precipitation of a solution of 5% PSf in N-methyl pyrrolidone containing 3% aniline in lower alcohols: methanol, ethanol, and isopropanol, followed by the oxidation of the remaining aniline in a solution of 10% hydrochloric acid and ammonium persulfate. The Nanoparticles of polysulfone (NP-PSf) and The three obtained variants of nanoparticles composites (NP-PSf-PANI) were morphologically (SEM) and (AFM), structurally and compositionally (FTIR) characterized and the results show that nanoparticles polysulfone have a much lower range than the composites. The Possibility of copper complexation by both nitrophenols, and by nanoparticle surface probably lead to the formation of more stable aggregates in the supply, which can sufficiently justify the increased retention. The Retentions of the chemical species in question use in all the tests made the same series:R NP-PSf-PANI-M] R NP-PSf-PANI-E] R NP-PSf-PANI-P] R NP-PSf

Polymeric Nanoparticles for Brain Drug Delivery - A Review

2020 ◽  
Vol 21 (9) ◽  
pp. 649-660
Author(s):  
Subashini Raman ◽  
Syed Mahmood ◽  
Ayah R. Hilles ◽  
Md Noushad Javed ◽  
Motia Azmana ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Surface Modification ◽  
Polymeric Nanoparticles ◽  
Drug Loading ◽  
Preparation Methods ◽  
Brain Drug Delivery ◽  
Polymeric Nanoparticle ◽  
Relationship Of ◽  
The Relationship ◽  
The Brain

Background: Blood-brain barrier (BBB) plays a most hindering role in drug delivery to the brain. Recent research comes out with the nanoparticles approach, is continuously working towards improving the delivery to the brain. Currently, polymeric nanoparticle is extensively involved in many therapies for spatial and temporal targeted areas delivery. Methods: We did a non-systematic review, and the literature was searched in Google, Science Direct and PubMed. An overview is provided for the formulation of polymeric nanoparticles using different methods, effect of surface modification on the nanoparticle properties with types of polymeric nanoparticles and preparation methods. An account of different nanomedicine employed with therapeutic agent to cross the BBB alone with biodistribution of the drugs. Results: We found that various types of polymeric nanoparticle systems are available and they prosper in delivering the therapeutic amount of the drug to the targeted area. The effect of physicochemical properties on nanoformulation includes change in their size, shape, elasticity, surface charge and hydrophobicity. Surface modification of polymers or nanocarriers is also vital in the formulation of nanoparticles to enhance targeting efficiency to the brain. Conclusion: More standardized methods for the preparation of nanoparticles and to assess the relationship of surface modification on drug delivery. While the preparation and its output like drug loading, particle size, and charge, permeation is always conflicted, so it requires more attention for the acceptance of nanoparticles for brain delivery.

Facile preparation of solid dispersions by dissolving drugs in N-vinyl-2-pyrrolidone and photopolymerization

2021 ◽  
pp. 112063
Author(s):  
Rongzhen Fang ◽  
Yan Liu ◽  
Lei Ma ◽  
Xiang Yu ◽  
Yiguang Jin
Keyword(s):  
Solid Dispersions ◽  
Facile Preparation

Facile Preparation ofHierarchicallyPorousg‐C 3 N 4 as High‐Performance Photocatalyst for Degradation of Methyl Violet Dye

2021 ◽  
Vol 6 (28) ◽  
pp. 7130-7135
Author(s):  
Jing Ni ◽  
Yating Wang ◽  
Honghong Liang ◽  
Yuanhong Kang ◽  
Bichan Liu ◽  
...  
Keyword(s):  
High Performance ◽  
Methyl Violet ◽  
Facile Preparation

Facile preparation of four-in-one nanozyme catalytic platform and the application in selective detection of catechol and hydroquinone

2021 ◽  
pp. 129763
Author(s):  
Xiaoxue Liu ◽  
Jiao Yang ◽  
Jing Cheng ◽  
Yi Xu ◽  
Wen Chen ◽  
...  
Keyword(s):  
Selective Detection ◽  
Facile Preparation
Sign in / Sign up

Export Citation Format

Share Document