scholarly journals Numerical Simulations of Decomposition of Hydrate Particles in Flowing Water Considering the Coupling of Intrinsic Kinetics with Mass and Heat Transfer Rates

ACS Omega ◽  
2021 ◽  
Vol 6 (36) ◽  
pp. 23355-23367
Author(s):  
Geng Zhang ◽  
Jun Li ◽  
Gonghui Liu ◽  
Hongwei Yang ◽  
Honglin Huang
Coatings ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 93
Author(s):  
Kottakkaran Sooppy Nisar ◽  
Aftab Ahmed Faridi ◽  
Sohail Ahmad ◽  
Nargis Khan ◽  
Kashif Ali ◽  
...  

The mass and heat transfer magnetohydrodynamic (MHD) flows have a substantial use in heat exchangers, electromagnetic casting, X-rays, the cooling of nuclear reactors, mass transportation, magnetic drug treatment, energy systems, fiber coating, etc. The present work numerically explores the mass and heat transportation flow of MHD micropolar fluid with the consideration of a chemical reaction. The flow is taken between the walls of a permeable channel. The quasi-linearization technique is utilized to solve the complex dynamical coupled and nonlinear differential equations. The consequences of the preeminent parameters are portrayed via graphs and tables. A tabular and graphical comparison evidently reveals a correlation of our results with the existing ones. A strong deceleration is found in the concentration due to the effect of a chemical reaction. Furthermore, the impact of the magnetic field force is to devaluate the mass and heat transfer rates not only at the lower but at the upper channel walls, likewise.


2011 ◽  
Vol 171 (3) ◽  
pp. 1308-1316 ◽  
Author(s):  
Bo-Hui Shi ◽  
Jing Gong ◽  
Chang-Yu Sun ◽  
Jian-Kui Zhao ◽  
Yao Ding ◽  
...  

2009 ◽  
Vol 131 (7) ◽  
Author(s):  
A.-R. A. Khaled ◽  
Abdulhaiy M. Radhwan ◽  
S. A. Al-Muaikel

Laminar falling film condensations over a vertical plate with an accelerating vapor flow is analyzed in this work in the presence of condensate suction or slip effects at the plate surface. The following assumptions are made: (i) laminar condensate flow having constant properties, (ii) pure vapor with a uniform saturation temperature in the vapor region, and (iii) the shear stress at the liquid/vapor interface is negligible. The appropriate fundamental governing partial differential equations for the condensate and vapor flows (continuity, momentum, and energy equations) for the above case are identified, nondimensionalized, and transformed using nonsimilarity transformation. The transformed equations were solved using numerical, iterative, and implicit finite-difference methods. It is shown that the freestream striking angle has insignificant influence on the condensation mass and heat transfer rates, except when slip condition is present and at relatively small Grl/Re2 values. Moreover, it is shown that increasing the values of the dimensionless suction parameter (VS) results to an increase in dimensionless mass of condensate (Γ(L)/(μl Re)) and Nusselt number (Nu(L)/Re1/2). Thus, it results in an increase in condensation mass and heat transfer rates. Finally, it is found that the condensation and heat transfer rates increase as Jakob number, slip parameter, and saturation temperature increase. Finally, the results of this work not only enrich the literature of condensation but also provide additional methods for saving thermal energy.


1971 ◽  
Vol 6 (3) ◽  
pp. 547-560 ◽  
Author(s):  
J. C. Haas ◽  
V. S. Arapaci ◽  
G. S. Springer

The transfer of mass and heat through a diatomic gas bounded by two plane parallel surfaces is investigated by a kinetic model which includes translational, rotational and vibrational degrees of freedom. A full range moment method is employed in the solution. Numerical solutions obtained for small temperature and pressure differences show the effect of inelastic collisions on the mass and heat fluxes. Approximate analytical expressions are derived for the mass and heat transfer rates, which are valid over the entire density range and yield the correct free-molecule and continuum limits. The results agree well with existing heat transfer and density measurements.


2018 ◽  
Vol 7 (4.10) ◽  
pp. 598
Author(s):  
M. Bhuvaneswari ◽  
S. Sivasankaran ◽  
S. Karthikeyan ◽  
S. Rajan

The purpose of this analytical work is to investigate the Dufour-Soret effects on three dimensional unsteady boundary layer flows, mass and heat transfer of a viscoelastic fluid upon a stretched surface in the existence of internal heat generation/absorption. The equations governing the flow are converted using similarity variables into a set of non-linear ordinary differential equations. The series solution is obtained by homotopy analysis. The results are analyzed for the influences of the various pertinent constants involving in the study. The mass and heat transfer rates are calculated by the localized Sherwood and Nusselt numbers along the surface.  


2003 ◽  
Vol 9 (2) ◽  
pp. 81-95 ◽  
Author(s):  
P. Jin ◽  
R. J. Goldstein

Local mass and heat transfer measurements on a simulated high-pressure turbine blade-tip surface are conducted in a linear cascade with a nonmoving tip endwall, using a naphthalene sublimation technique. The effects of tip clearance (0.86–6.90% of chord) are investigated at various exit Reynolds numbers (4–7 ×105) and turbulence intensities (0.2 and 12.0%).The mass transfer on the tip surface is significant along its pressure edge at the smallest tip clearance. At the two largest tip clearances, the separation bubble on the tip surface can cover the whole width of the tip on the second half of the tip surface. The average mass-transfer rate is highest at a tip clearance of 1.72% of chord. The average mass-transfer rate on the tip surface is four and six times as high as on the suction and the pressure surface, respectively. A high mainstream turbulence level of 12.0% reduces average mass-transfer rates on the tip surface, while the higher mainstream Reynolds number generates higher local and average mass-transfer rates on the tip surface.


Sign in / Sign up

Export Citation Format

Share Document