Suppressing the Polysulfide Shuttle Effect by Heteroatom-Doping for High-Performance Lithium–Sulfur Batteries

2018 ◽  
Vol 6 (6) ◽  
pp. 7545-7557 ◽  
Author(s):  
Manfang Chen ◽  
Shu Zhao ◽  
Shouxin Jiang ◽  
Cheng Huang ◽  
Xianyou Wang ◽  
...  
Keyword(s):  
High Performance ◽  
Heteroatom Doping ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur ◽  
Polysulfide Shuttle

Three-in-one cathode host based on Nb3O8/graphene superlattice heterostructures for high-performance Li–S batteries

2021 ◽  
Author(s):  
Chenhui WANG ◽  
Nobuyuki Sakai ◽  
Yasuo Ebina ◽  
Takayuki KIKUCHI ◽  
Monika Snowdon ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Next Generation ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Graphene Superlattice ◽  
Lithium Sulfur

Lithium-sulfur batteries have high promise for application in next-generation energy storage. However, further advances have been hindered by various intractable challenges, particularly three notorious problems: the “shuttle effect”, sluggish kinetics...

scholarly journals Effective Suppression of the Polysulfide Shuttle Effect in Lithium–Sulfur Batteries by Implementing rGO–PEDOT:PSS-Coated Separators via Air-Controlled Electrospray

ACS Omega ◽  
2018 ◽  
Vol 3 (12) ◽  
pp. 16465-16471 ◽  
Author(s):  
Jin Hong Lee ◽  
Jisoo Kang ◽  
Seung-Wan Kim ◽  
Willy Halim ◽  
Margaret W. Frey ◽  
...  
Keyword(s):  
Shuttle Effect ◽  
Effective Suppression ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur ◽  
Polysulfide Shuttle

scholarly journals Co-W Bimetallic Carbides as Sulfur Host for High-Performance Lithium–Sulfur Batteries

2021 ◽  
Author(s):  
Dongke Zhang ◽  
Ting Huang ◽  
Pengfei Zhao ◽  
Ze Zhang ◽  
Xingtao Qi ◽  
...  
Keyword(s):  
High Performance ◽  
Conductive Network ◽  
Rate Performance ◽  
Cycle Stability ◽  
Sulfur Cathode ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Sulfur Host ◽  
Lithium Sulfur ◽  
Excellent Stability

Abstract Due to the low conductivity of sulfur and the dissolution of polysulfides, the research and application of lithium-sulfur (Li-S) batteries have encountered certain resistance. Increasing conductivity and introducing polarity into the sulfur host can effectively overcome these long-standing problems. Herein, We first prepared Co3W3C@ C@ CNTs / S material and used it in the cathode of lithium-sulfur batteries, The existence of carboxylated CNTs can form a conductive network, accelerate the transmission of electrons and improve the rate performance, and polar Co3W3C can form a strong interaction with polysulfide intermediates, effectively inhibiting its shuttle effect, improving the utilization of sulfur cathode electrodes, and improving the capacity and cycle stability. The Co3W3C@C@CNTs / S electrode material has a capacity of 1,093 mA h g-1 at a 0.1 A g− 1 and 482 mA h g-1 at 5 A g− 1. Even after 500 cycles of 2 A g− 1, the capacity of each cycle is only reduced by 0.08%. The excellent stability of this material can provide a new idea for the future development of lithium-sulfur batteries.

scholarly journals MnO2/rGO/CNTs Framework as a Sulfur Host for High-Performance Li-S Batteries

Molecules ◽  
2020 ◽  
Vol 25 (8) ◽  
pp. 1989 ◽  
Author(s):  
Wei Dong ◽  
Lingqiang Meng ◽  
Xiaodong Hong ◽  
Sizhe Liu ◽  
Ding Shen ◽  
...  
Keyword(s):  
High Performance ◽  
Physical Adsorption ◽  
Rapid Development ◽  
Electronic Conductivity ◽  
Specific Capacity ◽  
Framework Structure ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur ◽  
Initial Capacity

Lithium-sulfur batteries are very promising next-generation energy storage batteries due to their high theoretical specific capacity. However, the shuttle effect of lithium-sulfur batteries is one of the important bottlenecks that limits its rapid development. Herein, physical and chemical dual adsorption of lithium polysulfides are achieved by designing a novel framework structure consisting of MnO2, reduced graphene oxide (rGO), and carbon nanotubes (CNTs). The framework-structure composite of MnO2/rGO/CNTs is prepared by a simple hydrothermal method. The framework exhibits a uniform and abundant mesoporous structure (concentrating in ~12 nm). MnO2 is an α phase structure and the α-MnO2 also has a significant effect on the adsorption of lithium polysulfides. The rGO and CNTs provide a good physical adsorption interaction and good electronic conductivity for the dissolved polysulfides. As a result, the MnO2/rGO/CNTs/S cathode delivered a high initial capacity of 1201 mAh g−1 at 0.2 C. The average capacities were 916 mAh g−1, 736 mAh g−1, and 547 mAh g−1 at the current densities of 0.5 C, 1 C, and 2 C, respectively. In addition, when tested at 0.5 C, the MnO2/rGO/CNTs/S exhibited a high initial capacity of 1010 mAh g−1 and achieved 780 mAh g−1 after 200 cycles, with a low capacity decay rate of 0.11% per cycle. This framework-structure composite provides a simple way to improve the electrochemical performance of Li-S batteries.

An acetylene black modified gel polymer electrolyte for high-performance lithium–sulfur batteries

2019 ◽  
Vol 7 (22) ◽  
pp. 13679-13686 ◽  
Author(s):  
Dezhi Yang ◽  
Liang He ◽  
Yu Liu ◽  
Wenqi Yan ◽  
Shishuo Liang ◽  
...  
Keyword(s):  
Polymer Electrolyte ◽  
High Performance ◽  
Gel Polymer Electrolyte ◽  
Dendrite Growth ◽  
Acetylene Black ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Lithium Dendrite ◽  
Lithium Sulfur

An acetylene black modified gel polymer electrolyte was prepared to simultaneously solve the problems of shuttle effect and lithium dendrite growth for high-performance Li–S batteries.

A Mn3O4 nano-wall array based binder-free cathode for high performance lithium–sulfur batteries

2017 ◽  
Vol 5 (14) ◽  
pp. 6447-6454 ◽  
Author(s):  
Junling Guo ◽  
Xiaolong Zhang ◽  
Xinyu Du ◽  
Fengxiang Zhang
Keyword(s):  
High Performance ◽  
Lithium Sulfur Batteries ◽  
Binder Free ◽  
Lithium Sulfur ◽  
Polysulfide Shuttle

Nano-sheet array structured, highly stable Mn3O4 (compared with MnO2) provides long-lasting suppression of polysulfide shuttle in lithium sulfur batteries.

A Well-Designed Polymer as a Three-in-One Multifunctional Binder for High-Performance Lithium-Sulfur Battery

2020 ◽  
Author(s):  
Jia-Jia Yuan ◽  
Qingran Kong ◽  
Zheng Huang ◽  
You-Zhi Song ◽  
Mingyang Li ◽  
...  
Keyword(s):  
High Performance ◽  
Cycle Life ◽  
Commercial Application ◽  
Lithium Sulfur Battery ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Cathode Structure ◽  
Sulfur Battery ◽  
Lithium Sulfur ◽  
Capacity Decay

The commercial application of lithium-sulfur batteries is mainly restricted by quick capacity decay and poor cycle life due to the shuttle effect, insulate nature of sulfur, and cathode structure pulverization....

scholarly journals Construction of Electrocatalytic and Heat-Resistant Self-Supporting Electrodes for High-Performance Lithium–Sulfur Batteries

2019 ◽  
Vol 11 (1) ◽  
Author(s):  
Xuemei Zhang ◽  
Yunhong Wei ◽  
Boya Wang ◽  
Mei Wang ◽  
Yun Zhang ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
High Performance ◽  
Structural Engineering ◽  
Utilization Efficiency ◽  
High Rate ◽  
Shuttle Effect ◽  
Electrocatalytic Effect ◽  
Lithium Sulfur Batteries ◽  
Engineering Strategy ◽  
Lithium Sulfur

Abstract Boosting the utilization efficiency of sulfur electrodes and suppressing the “shuttle effect” of intermediate polysulfides remain the critical challenge for high-performance lithium–sulfur batteries (LSBs). However, most of reported sulfur electrodes are not competent to realize the fast conversion of polysulfides into insoluble lithium sulfides when applied with high sulfur loading, as well as to mitigate the more serious shuttle effect of polysulfides, especially when worked at an elevated temperature. Herein, we reported a unique structural engineering strategy of crafting a unique hierarchical multifunctional electrode architecture constructed by rooting MOF-derived CoS2/carbon nanoleaf arrays (CoS2–CNA) into a nitrogen-rich 3D conductive scaffold (CTNF@CoS2–CNA) for LSBs. An accelerated electrocatalytic effect and improved polysulfide redox kinetics arising from CoS2–CNA were investigated. Besides, the strong capillarity effect and chemisorption of CTNF@CoS2–CNA to polysulfides enable high loading and efficient utilization of sulfur, thus leading to high-performance LIBs performed not only at room temperature but also up to an elevated temperature (55 °C). Even with the ultrahigh sulfur loading of 7.19 mg cm−2, the CTNF@CoS2–CNA/S cathode still exhibits high rate capacity at 55 °C.

Inhibiting polysulfide shuttling using dual-functional nanowire/nanotube modified layers for highly stable lithium–sulfur batteries

2019 ◽  
Vol 43 (37) ◽  
pp. 14708-14713 ◽  
Author(s):  
Yizhou Wang ◽  
Wenhui Liu ◽  
Ruiqing Liu ◽  
Peifeng Pan ◽  
Liyao Suo ◽  
...  
Keyword(s):  
High Conductivity ◽  
Shuttle Effect ◽  
Dual Functional ◽  
Strong Adsorption ◽  
Lithium Sulfur Batteries ◽  
Adsorption Capability ◽  
Lithium Sulfur ◽  
Polysulfide Shuttle

Dual-functional MnO2 nanowire/CNT modified layers were prepared to inhibit the polysulfide shuttle effect utilizing their strong adsorption capability and high conductivity.

Sign in / Sign up

Export Citation Format

Share Document