Synthesis of Unloading Operation Procedure for a Mixed Operation of Above-Ground and In-Ground Liquefied Natural Gas Storage Tanks Using Dynamic Simulation

2010 ◽  
Vol 49 (17) ◽  
pp. 8219-8226 ◽  
Author(s):  
Chul-Jin Lee ◽  
Youngsub Lim ◽  
Chansaem Park ◽  
Sangho Lee ◽  
Chonghun Han
Keyword(s):  
Natural Gas ◽  
Dynamic Simulation ◽  
Gas Storage ◽  
Liquefied Natural Gas ◽  
Storage Tanks ◽  
Natural Gas Storage ◽  
Operation Procedure ◽  
Mixed Operation

Development of large-scale precast, prestressed concrete liquefied natural gas storage tanks

PCI Journal ◽  
2013 ◽  
Vol 58 (4) ◽  
Author(s):  
Kåre Hjorteset ◽  
Markus Wernli ◽  
Michael W. LaNier ◽  
Kimberly A. Hoyle ◽  
William H. Oliver
Keyword(s):  
Natural Gas ◽  
Prestressed Concrete ◽  
Large Scale ◽  
Gas Storage ◽  
Liquefied Natural Gas ◽  
Storage Tanks ◽  
Natural Gas Storage ◽  
Precast Prestressed Concrete

Non-equilibrium thermodynamic model for liquefied natural gas storage tanks

Energy ◽  
2020 ◽  
Vol 190 ◽  
pp. 116412 ◽  
Author(s):  
Zhihao Wang ◽  
Amir Sharafian ◽  
Walter Mérida
Keyword(s):  
Natural Gas ◽  
Thermodynamic Model ◽  
Gas Storage ◽  
Liquefied Natural Gas ◽  
Storage Tanks ◽  
Equilibrium Thermodynamic ◽  
Natural Gas Storage ◽  
Non Equilibrium

scholarly journals Effects of Crack Tip Constraint on the Fracture Toughness Assessment of 9% Ni Steel for Cryogenic Application in Liquefied Natural Gas Storage Tanks

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5250
Author(s):  
Young Kyun Kim ◽  
Byung Taek Oh ◽  
Jae Hoon Kim
Keyword(s):  
Fracture Toughness ◽  
Natural Gas ◽  
Structural Integrity ◽  
Crack Tip ◽  
Gas Storage ◽  
Liquefied Natural Gas ◽  
Storage Tanks ◽  
Natural Gas Storage ◽  
Finite Elements Analysis ◽  
Weibull Stress

Recently, increasing demand for the accurate assessment of the structural integrity and fitness-for-service (FFS) analysis of engineering structures has elevated constraint effects to one of the most important issues in fracture mechanics and structural integrity research. In this paper, the effect of crack tip constraints are investigated on the fracture toughness assessment of 9% Ni steel for application in liquefied natural gas storage tanks. Crack tip opening displacement (CTOD) tests were conducted using both conventional standard three-point bending (3PB) and wide plate (WP) specimens at a cryogenic temperature of −196 °C. The distribution of the stress and strain fields near the crack tip in the 3PB and WP specimens were then obtained by FE (Finite Elements) analysis. Based on both the experimental and numerical results, the parameters of the Weibull distribution were obtained to evaluate the critical Weibull stress at brittle fracture. The equivalent CTOD ratio β is defined as the ratio of the CTOD of the 3PB specimen to the CTOD of the WP specimen at the same Weibull stress. The application of the proposed CTOD toughness correction method to the WP results was then demonstrated in the context of a failure assessment diagram (FAD). It was determined that the conventional evaluation yields an excessively conservative result for WP specimens, but can be reasonably reduced by applying β.

Numerical study of steady natural convection in a liquefied natural gas cylindrical storage tank equipped with baffles

2019 ◽  
Vol 234 (5) ◽  
pp. 709-721 ◽  
Author(s):  
Mohamed Haddar ◽  
Moez Hammami ◽  
Mounir Baccar
Keyword(s):  
Rayleigh Number ◽  
Natural Gas ◽  
Lateral Surface ◽  
Storage Tank ◽  
Cooling System ◽  
Numerical Study ◽  
Gas Storage ◽  
Liquefied Natural Gas ◽  
Natural Gas Storage ◽  
Average Temperature

In this paper, a study of cooling system for a liquefied natural gas storage tank is conducted. Our objective is to remedy the heat ingress to the liquefied natural gas from the environment using baffles toward limiting temperature elevation in the tank, and then the Boil-off Gas (BOG) formation. A specific code based on the finite volume method is developed to supply a fine knowledge of the hydrodynamic and thermal liquefied natural gas characteristics in the cylindrical tank heated from bottom and lateral surfaces. The effect of the number, position and dimension of baffles, on the flow structure and thermal behavior, has been analyzed. According to our simulation results, the baffles should be placed at the top of tank nearby the lateral wall as the liquefied natural gas dimensionless average temperature can be reduced by 36%. The installation of four rectangular baffles, equally spaced around the perimeter of the tank, gives better homogenization of the temperature field and decreases the average temperature by about 44% in order to limit BOG formation. Finally, two correlations of the Nusselt number are established for the flat rectangular baffle plates and the lateral surface of the cylindrical liquefied natural gas storage tank as a function of the Rayleigh number, as well as the baffle number. Scaling of these correlations with the Rayleigh number gives exponents of 0.25 and 0.18 for lateral surface and baffle, respectively, which are in good agreement with literature.

scholarly journals Parametric Analysis on Boil-Off Gas Rate inside Liquefied Natural Gas Storage Tank

2014 ◽  
Vol 6 ◽  
pp. 845-853 ◽  
Author(s):  
Mohamad Shukri Zakaria ◽  
Kahar Osman ◽  
Ahmad Anas Yusof ◽  
Mohamad Hafidzal Mohd Hanafi ◽  
Mohd Noor Asril Saadun ◽  
...  
Keyword(s):  
Natural Gas ◽  
Parametric Analysis ◽  
Storage Tank ◽  
Gas Storage ◽  
Liquefied Natural Gas ◽  
Natural Gas Storage
Sign in / Sign up

Export Citation Format

Share Document