Real-Time Observation of the Solid–Liquid–Vapor Dissolution of Individual Tin(IV) Oxide Nanowires

ACS Nano ◽  
2014 ◽  
Vol 8 (6) ◽  
pp. 5441-5448 ◽  
Author(s):  
Bethany M. Hudak ◽  
Yao-Jen Chang ◽  
Lei Yu ◽  
Guohua Li ◽  
Danielle N. Edwards ◽  
...  
2013 ◽  
Vol 740-742 ◽  
pp. 35-38 ◽  
Author(s):  
Sakiko Kawanishi ◽  
Takeshi Yoshikawa ◽  
Kazuki Morita

Precise morphological control of the interface between SiC and solution during the solution growth of SiC is crucial for obtaining high quality crystals with fewer defects and less step bunching. In this paper, a new technique for real-time observation of the high temperature interface between SiC and solution through the back surface of SiC was developed by focusing on the “wide” bandgap of SiC. Real-time observation of the interface during dissolution of SiC into an Fe-Si solvent alloy was carried out using a digital microscope, and the submicron-height structure of the solid-liquid interface was clearly observed at up to 1773 K. Interface morphologies, such as numerous hexagonal pits which were present at the initial stage of dissolution, followed by preferential dissolution in the lateral direction, were observed.


2018 ◽  
Vol 15 ◽  
pp. 97-127
Author(s):  
Yun Chen ◽  
Na Min Xiao ◽  
Dian Zhong Li ◽  
Tong Zhao Gong ◽  
Henri Nguyen-Thi

Directional solidification is a paradigm process to gain the desired microstructure via certain applied solidification parameters. A thorough understanding of the diffusion-limited solid-liquid interface morphology evolution from initial transient to steady state is of uppermost importance to optimize the solidification processes. The rapid development of quantitative phase-field model provides a feasible computational tool to explore the underlying physics of the morphological transition at different stages. On basis of the diffusion-limited quantitative phase-field simulations using adaptive finite element method, the directional solidification of Al-4wt.%Cu alloy is characterized and both the solid interface propagation speed and solute profile are analyzed. The simulations are then compared with the in situ and real-time observation by means of synchrotron radiation x-ray radiography image. Good agreements are obtained between simulations and experimental data. Detailed mechanism that controls the morphological instability and transition are then addressed.


2015 ◽  
Vol 127 (50) ◽  
pp. 15437-15440 ◽  
Author(s):  
Kuo Qi ◽  
Jiake Wei ◽  
Muhua Sun ◽  
Qianming Huang ◽  
Xiaomin Li ◽  
...  

2015 ◽  
Vol 54 (50) ◽  
pp. 15222-15225 ◽  
Author(s):  
Kuo Qi ◽  
Jiake Wei ◽  
Muhua Sun ◽  
Qianming Huang ◽  
Xiaomin Li ◽  
...  

Author(s):  
K. Harada ◽  
T. Matsuda ◽  
J.E. Bonevich ◽  
M. Igarashi ◽  
S. Kondo ◽  
...  

Previous observations of magnetic flux-lines (vortex lattices) in superconductors, such as the field distribution of a flux-line, and flux-line dynamics activated by heat and current, have employed the high spatial resolution and magnetic sensitivity of electron holography. And recently, the 2-D static distribution of vortices was also observed by this technique. However, real-time observations of the vortex lattice, in spite of scientific and technological interest, have not been possible due to experimental difficulties. Here, we report the real-time observation of vortex lattices in a thin superconductor, by means of Lorentz microscopy using a 300 kV field emission electron microscope. This technique allows us to observe the dynamic motion of individual vortices and record the events on a VTR system.The experimental arrangement is shown in Fig. 1. A Nb thin film for transmission observation was prepared by chemical etching. The grain size of the film was increased by annealing, and single crystals were observed with a thickness of 50∼90 nm.


1997 ◽  
Vol 491 (2) ◽  
pp. 436-450 ◽  
Author(s):  
C. Alcock ◽  
W. H. Allen ◽  
R. A. Allsman ◽  
D. Alves ◽  
T. S. Axelrod ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document