scholarly journals Viscous Dissipation and Apparent Permeability of Gas Flow in Nanoporous Media

2020 ◽  
Vol 125 (2) ◽  
Author(s):  
Jianlin Zhao ◽  
Qinjun Kang ◽  
Youping Wang ◽  
Jun Yao ◽  
Lei Zhang ◽  
...  
Keyword(s):  
Viscous Dissipation ◽  
Gas Flow ◽  
Apparent Permeability ◽  
Nanoporous Media

scholarly journals Prediction of Production Performance of Refractured Shale Gas Well considering Coupled Multiscale Gas Flow and Geomechanics

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-21 ◽  
Author(s):  
Zhiqiang Li ◽  
Zhilin Qi ◽  
Wende Yan ◽  
Zuping Xiang ◽  
Xiang Ao ◽  
...  
Keyword(s):  
Shale Gas ◽  
Gas Flow ◽  
Knudsen Diffusion ◽  
Stress Sensitivity ◽  
Production Performance ◽  
Design Parameters ◽  
Production Loss ◽  
Apparent Permeability ◽  
Gas Well ◽  
The Matrix

Production simulation is an important method to evaluate the stimulation effect of refracturing. Therefore, a production simulation model based on coupled fluid flow and geomechanics in triple continuum including kerogen, an inorganic matrix, and a fracture network is proposed considering the multiscale flow characteristics of shale gas, the induced stress of fracture opening, and the pore elastic effect. The complex transport mechanisms due to multiple physics, including gas adsorption/desorption, slip flow, Knudsen diffusion, surface diffusion, stress sensitivity, and adsorption layer are fully considered in this model. The apparent permeability is used to describe the multiple physics occurring in the matrix. The model is validated using actual production data of a horizontal shale gas well and applied to predict the production and production increase percentage (PIP) after refracturing. A sensitivity analysis is performed to study the effects of the refracturing pattern, fracture conductivity, width of stimulated reservoir volume (SRV), SRV length of new and initial fractures, and refracturing time on production and the PIP. In addition, the effects of multiple physics on the matrix permeability and production, and the geomechanical effects of matrix and fracture on production are also studied. The research shows that the refracturing design parameters have an important influence on the PIP. The geomechanical effect is an important cause of production loss, while slippage and diffusion effects in matrix can offset the production loss.

scholarly journals Macroscopic Model for Passive Mass Dispersion in Porous Media Including Knudsen and Diffusive Slip Effects

2021 ◽  
Vol 3 ◽  
Author(s):  
Francisco J. Valdés-Parada ◽  
Didier Lasseux
Keyword(s):  
Boundary Condition ◽  
Porous Media ◽  
Mass Transport ◽  
Gas Flow ◽  
Macroscopic Model ◽  
Type Model ◽  
Pore Scale ◽  
Advective Transport ◽  
Apparent Permeability ◽  
Slip Effects

In this work, a macroscopic model for incompressible and Newtonian gas flow coupled to Fickian and advective transport of a passive solute in rigid and homogeneous porous media is derived. At the pore-scale, both momentum and mass transport phenomena are coupled, not only by the convective mechanism in the mass transport equation, but also in the solid-fluid interfacial boundary condition. This boundary condition is a generalization of the Kramers-Kistemaker slip condition that includes the Knudsen effects. The resulting upscaled model, applicable in the bulk of the porous medium, corresponds to: 1) A Darcy-type model that involves an apparent permeability tensor, complemented by a dispersive term and 2) A macroscopic convection-dispersion equation for the solute, in which both the macroscopic velocity and the total dispersion tensor are influenced by the slip effects taking place at the pore-scale. The use of the model is restricted by the starting assumptions imposed in the governing equations at the pore scale and by the (spatial and temporal) constraints involved in the upscaling process. The different regimes of application of the model, in terms of the Péclet number values, are discussed as well as its extents and limitations. This new model generalizes previous attempts that only include either Knudsen or diffusive slip effects in porous media.

LATTICE BOLTZMANN SIMULATION OF APPARENT PERMEABILITY FOR GAS FLOW IN NANOCHANNELS

2017 ◽  
Vol 20 (12) ◽  
pp. 1059-1070 ◽  
Author(s):  
Kingsley I. Madiebo ◽  
Hadi Nasrabadi ◽  
Eduardo Gildin
Keyword(s):  
Lattice Boltzmann ◽  
Gas Flow ◽  
Apparent Permeability ◽  
Lattice Boltzmann Simulation

Energy Equation of Gas Flow With Low Velocity in a Micro-Channel

2014 ◽  
Author(s):  
Yutaka Asako
Keyword(s):  
Viscous Dissipation ◽  
Incompressible Flow ◽  
Gas Flow ◽  
Energy Equation ◽  
Outlet Temperature ◽  
Gas Temperature ◽  
Low Velocity ◽  
Dissipation Term ◽  
Pressure Term ◽  
Micro Channels

The energy equation for incompressible flow with the viscous dissipation term is often used for the governing equations of gas flow with low velocity in micro-channels. However, the results which are obtained by solving these equations do not satisfy the first law of the thermodynamics. In the case of ideal gas with low velocity, the inlet and the outlet temperatures of an adiabatic channel are the same based on the first law of the thermodynamics. However, the outlet temperature which is obtained by solving the energy equation for incompressible flow with the viscous dissipation term is higher than the inlet gas temperature, since the viscous dissipation term takes positive value. This inconsistency arose from wrong choice of the relation between the enthalpy and temperature that resulted in neglecting the substantial derivative of pressure term in the energy equation. In this paper the correct energy equation which includes the substantial derivative of pressure term is proposed. Some samples of physically consistent results which are obtained by solving the proposed energy equation are demonstrated.

Determining Shale Permeability to Gas by Simultaneous Analysis of Various Pressure Tests

SPE Journal ◽  
2012 ◽  
Vol 17 (03) ◽  
pp. 717-726 ◽  
Author(s):  
F.. Civan ◽  
C.S.. S. Rai ◽  
C.H.. H. Sondergeld
Keyword(s):  
Gas Flow ◽  
Pressure Pulse ◽  
Reference Conditions ◽  
Transient State ◽  
Data Interpretation ◽  
Model Parameters ◽  
Apparent Permeability ◽  
Core Samples ◽  
Pulse Transmission ◽  
Pressure Tests

Summary A model-assisted analysis is presented of pressure-pulse-transmission data obtained under different pressure conditions with core plugs of shale-gas formations. Applications and validations for steady-state and transient-state laboratory tests are provided. Best-estimate values of the intrinsic permeability and tortuosity at a reference condition and the Langmuir volume and pressure are determined by matching the solution of a modified Darcy model to several pressure-pulse-transmission flow tests with core samples simultaneously. The data-interpretation model considers the prevailing characteristics of the apparent permeability under the various flow regimes involving gas flow through extremely low-permeability core samples. Further, the present fully pressure-dependent shale-and gas-property formulation allows for model-assisted extrapolation from the reference conditions to field conditions once the unknown model parameters have been estimated under laboratory conditions. The improved method provides a better match to the measurements of the pressure tests than previous models, which assume only Darcy flow.

Leakage Predictions for Static Gasket Based on the Porous Media Theory

2008 ◽  
Vol 131 (2) ◽  
Author(s):  
Pascal Jolly ◽  
Luc Marchand
Keyword(s):  
Porous Media ◽  
Gas Flow ◽  
Molecular Flow ◽  
Intrinsic Permeability ◽  
Slip Boundary Conditions ◽  
Apparent Permeability ◽  
Slip Boundary ◽  
Porous Media Theory ◽  
Porous Media Model ◽  
Different Gases

In the present work, the annular static gaskets are considered as porous media and Darcy’s law is written for a steady radial flow of a compressible gas with a first order slip boundary conditions. From this, a simple equation is obtained that includes Klinkenberg’s intrinsic permeability factor kv of the gasket and the Knudsen number Kn′o defined with a characteristic length ℓ. The parameters kv and ℓ of the porous gasket are calculated from experimental results obtained with a reference gas at several gasket stress levels. Then, with kv and ℓ, the inverse procedure is performed to predict the leakage rate for three different gases. It is shown that the porous media model predicts leak rates with the same accuracy as the laminar-molecular flow (LMF) model of Marchand et al. However, the new model has the advantage of furnishing phenomenological information on the evolution of the intrinsic permeability and the gas flow regimes with the gasket compressive stress. It also enables quick identification of the part of leakage that occurs at the flange-gasket interface at low gasket stresses. At low gas pressure, the behavior of the apparent permeability diverges from that of Klinkenberg’s, indicating that the rarefaction effect becomes preponderant on the leak.

Sign in / Sign up

Export Citation Format

Share Document