scholarly journals Quantifying Intrinsic and Extrinsic Contributions to Radial Anisotropy in Tomographic Models

Author(s):  
J. K. Magali ◽  
T. Bodin ◽  
N. Hedjazian ◽  
Y. Ricard ◽  
Y. Capdeville ◽  
...  
Keyword(s):  
2020 ◽  
Vol 224 (3) ◽  
pp. 1930-1944 ◽  
Author(s):  
E J Rindraharisaona ◽  
F Tilmann ◽  
X Yuan ◽  
J Dreiling ◽  
J Giese ◽  
...  

SUMMARY We investigate the upper mantle seismic structure beneath southern Madagascar and infer the imprint of geodynamic events since Madagascar’s break-up from Africa and India and earlier rifting episodes. Rayleigh and Love wave phase velocities along a profile across southern Madagascar were determined by application of the two-station method to teleseismic earthquake data. For shorter periods (<20 s), these data were supplemented by previously published dispersion curves determined from ambient noise correlation. First, tomographic models of the phase velocities were determined. In a second step, 1-D models of SV and SH wave velocities were inverted based on the dispersion curves extracted from the tomographic models. As the lithospheric mantle is represented by high velocities we identify the lithosphere–asthenosphere boundary by the strongest negative velocity gradient. Finally, the radial anisotropy (RA) is derived from the difference between the SV and SH velocity models. An additional constraint on the lithospheric thickness is provided by the presence of a negative conversion seen in S receiver functions, which results in comparable estimates under most of Madagascar. We infer a lithospheric thickness of 110−150 km beneath southern Madagascar, significantly thinner than beneath the mobile belts in East Africa (150−200 km), where the crust is of comparable age and which were located close to Madagascar in Gondwanaland. The lithospheric thickness is correlated with the geological domains. The thinnest lithosphere (∼110 km) is found beneath the Morondava basin. The pre-breakup Karoo failed rifting, the rifting and breakup of Gondwanaland have likely thinned the lithosphere there. The thickness of the lithosphere in the Proterozoic terranes (Androyen and Anosyen domains) ranges from 125 to 140 km, which is still ∼30 km thinner than in the Mozambique belt in Tanzania. The lithosphere is the thickest beneath Ikalamavony domain (Proterozoic) and the west part of the Antananarivo domain (Archean) with a thickness of ∼150 km. Below the eastern part of Archean domain the lithosphere thickness reduces to ∼130 km. The lithosphere below the entire profile is characterized by positive RA. The strongest RA is observed in the uppermost mantle beneath the Morondava basin (maximum value of ∼9 per cent), which is understandable from the strong stretching that the basin was exposed to during the Karoo and subsequent rifting episode. Anisotropy is still significantly positive below the Proterozoic (maximum value of ∼5 per cent) and Archean (maximum value of ∼6 per cent) domains, which may result from lithospheric extension during the Mesozoic and/or thereafter. In the asthenosphere, a positive RA is observed beneath the eastern part Morondava sedimentary basin and the Proterozoic domain, indicating a horizontal asthenospheric flow pattern. Negative RA is found beneath the Archean in the east, suggesting a small-scale asthenospheric upwelling, consistent with previous studies. Alternatively, the relatively high shear wave velocity in the asthenosphere in this region indicate that the negative RA could be associated to the Réunion mantle plume, at least beneath the volcanic formation, along the eastern coast.


Geophysics ◽  
2021 ◽  
pp. 1-47
Author(s):  
Song Xu ◽  
Xiao-Ming Tang ◽  
Carlos Torres-Verdín ◽  
Zhen Li ◽  
Yuanda Su

Aligned fractures/cracks in rocks are a primary source of elastic anisotropy. In an azimuthally anisotropic formation surrounding a borehole, shear waves split into fast and slow waves that propagate along the borehole and are recorded by a borehole logging tool. However, when the formation has conjugate fractures with orthogonal strike directions, the azimuthal anisotropy vanishes. Hence, azimuthal anisotropy measurements may not be adequate to detect orthogonal fracture sets. We develop a method for obtaining azimuthal and radial shear-wave anisotropy parameters simultaneously from four-component array waveforms. The method utilizes a velocity tomogram around the borehole. Azimuthal and radial anisotropy were determined by integrating shear velocity radiation profile along the radial direction at different azimuthal angles. Results indicate that this approach is reliable for estimating anisotropy properties in aligned crack systems. The advantage of this interpretation method is shown in multiple conjugate crack systems. Field data processing examples are used to verify the application of the proposed technique. Comparison of results against those obtained with a conventional procedure shows that the new method can not only provide estimates of azimuthal anisotropy, but also of the radial anisotropy parameter, which is important in fracture network evaluation.


2007 ◽  
Vol 3 (S246) ◽  
pp. 341-345
Author(s):  
Eva Noyola ◽  
Karl Gebhardt ◽  
Marcel Bergmann

AbstractThe globular cluster ω Centauri is one of the largest and most massive members of the Galactic system. Its classification as a globular cluster has been challenged making it a candidate for being the stripped core of an accreted dwarf galaxy; this and the fact that it has one of the largest velocity dispersions for star clusters in our galaxy makes it an interesting candidate for harboring an intermediate mass black hole. We measure the surface brightness profile from integrated light on an HST/ACS image, and find a central power-law cusp of logarithmic slope -0.08. We also analyze Gemini GMOS-IFU kinematic data for a 5”x5” field centered on the nucleus of the cluster, as well as for a field 14″ away. We detect a clear rise in the velocity dispersion from 18.6 kms−1 at 14″ to 23 kms−1 in the center. Given the very large core in ω Cen (2.58'), an increase in the dispersion in the central 10″ is difficult to attribute to stellar remnants, since it requires too many dark remnants and the implied configuration would dissolve quickly given the relaxation time in the core. However, the increase could be consistent with the existence of a central black hole. Assuming a constant M/L for the stars within the core, the dispersion profile from these data and data at larger radii implies a black hole mass of 4.0+0.75−1.0×104M⊙. We have also run flattened, orbit-based models and find a similar mass. In addition, the no black hole case for the orbit model requires an extreme amount of radial anisotropy, which is difficult to preserve given the short relaxation time of the cluster.


2021 ◽  
Author(s):  
Jorge Acevedo ◽  
Gabriela Fernández-Viejo ◽  
Sergio Llana-Fúnez ◽  
Carlos López-Fernández ◽  
Javier Olona ◽  
...  

Abstract. The cross-correlation of ambient noise records registered by seismic networks has proven to be a valuable tool to obtain new insights into the crustal structure at different scales. Based on 2- to 14-s-period Rayleigh and Love dispersion data extracted from the seismic ambient noise recorded by 20 three-component broadband stations belonging to two different temporary experiments, we present the first i) upper crustal (1–14 km) high-resolution shear wave velocity and ii) radial anisotropy variation models of the continental crust in NW Iberia. The area of study represents one of the best exposed cross-sections along the Variscan orogen of western Europe, showing the transition between the external eastern zones towards the internal areas in the west. Both the 2-D maps and an E-W transect reveal a close correspondence with the main geological domains of the Variscan orogen. The foreland-fold and thrust-belt of the orogen, the Cantabrian Zone, is revealed by a zone of relatively low shear wave velocities (2.3–3.0 km/s), while the internal zones generally display higher homogeneous velocities (> 3.1 km/s). The boundary between both zones is clearly delineated in the models, depicting the arcuate shape of the orogen grain. The velocity patterns also reveal variations of the bulk properties of the rocks that can be linked to major Variscan structures, such as the basal detachment of the Cantabrian Zone or the stack of nappes involving pre-Variscan basement; or sedimentary features such as the presence of thick syn-orogenic siliciclastic wedges. Overall, the radial anisotropy magnitude varies between −5 and 15 % and increases with depth. The depth pattern suggests that the alignment of cracks is the main source of anisotropy at < 8 km depths, although the intrinsic anisotropy seems to be significant in the West-Asturian Leonese Zone, the low-grade slate belt adjacent to the Cantabrian Zone. At depths > 8 km, widespread high and positive radial anisotropies are observed, caused by the presence of subhorizontal alignments of grains and minerals in relation to the internal deformation of rocks either during the Variscan orogeny or prior to it.


2021 ◽  
Author(s):  
Manish Sharma ◽  
Dhasarathan Vigneswaran ◽  
Leslie A. Rusch ◽  
Sophie LaRochelle ◽  
Bora Ung

2021 ◽  
Author(s):  
John Keith Magali ◽  
Thomas Bodin ◽  
Navid Hedjazian ◽  
Yanick Ricard ◽  
Yann Capdeville

&lt;p&gt;Large-scale seismic anisotropy inferred from seismic observations has been loosely interpreted either in terms of intrinsic anisotropy due to Crystallographic Preferred Orientation (CPO) development of mantle minerals or extrinsic anisotropy due to rock-scale Shape Preferred Orientation (SPO). The coexistence of both contributions misconstrues the origins of seismic anisotropy observed in seismic tomography models. It is thus essential to discriminate CPO from SPO in the effective anisotropy of an upscaled/homogenized medium, that is, the best possible elastic model recovered using finite-frequency seismic data assuming perfect data coverage. In this work, we investigate the effects of upscaling an intrinsically-anisotropic and highly-heterogeneous Earth's mantle. The problem is applied to a 2-D marble cake model of the mantle with a binary composition in the presence of CPO obtained from a micro-mechanical model. We compute the long-wavelength effective equivalent of this mantle model using the 3D non-periodic elastic homogenization technique. Our numerical findings predict that overall, upscaling purely intrinsically anisotropic medium amounts to the convection-scale averaging of CPO. As a result, it always underestimates the anisotropy, and may only be overestimated due to the additive extrinsic anisotropy from SPO. Finally, we show analytically (in 1D) and numerically (in 2D) that the full effective radial anisotropy &amp;#958;&lt;sup&gt;*&lt;/sup&gt; is approximately just the product of the effective intrinsic radial anisotropy &amp;#958;&lt;sup&gt;*&lt;/sup&gt;&lt;sub&gt;CPO&lt;/sub&gt; and the extrinsic radial anisotropy &amp;#958;&lt;sub&gt;SPO&lt;/sub&gt;:&lt;/p&gt;&lt;p&gt;&amp;#958;&lt;sup&gt;*&amp;#160;&lt;/sup&gt;= &amp;#958;&lt;sup&gt;*&lt;/sup&gt;&lt;sub&gt;CPO &lt;/sub&gt;&amp;#215; &amp;#958;&lt;sub&gt;SPO&lt;/sub&gt;&lt;/p&gt;&lt;p&gt;Based on the above relation, it is imperative to homogenize a texture evolution model first before drawing interpretations from existing anisotropic tomography models. Such a scaling law can therefore be used as a constraint to better estimate the separate contributions of CPO and SPO from the effective anisotropy observed in tomographic models.&lt;/p&gt;


Sign in / Sign up

Export Citation Format

Share Document