Is a national standard of education practical?

1915 ◽  
Author(s):  
William Howard Taft
Keyword(s):  
National Standard

172. A Canadian National Standard for Official First Responder CBRN PPE

2005 ◽  
Author(s):  
U. Bickis ◽  
T. Beardall ◽  
E. Dickson ◽  
B. Harrison
Keyword(s):  
National Standard ◽  
First Responder

CARBONATION INDUCED CORROSION ANALYSIS OF REINFORCED CONCRETE STRUCTURES BASED ON FULL PROBABILISTIC APPROACH – AN INDONESIAN CASE STUDY

2018 ◽  
Vol 4 (1) ◽  
pp. 165
Author(s):  
Herry Prabowo ◽  
Mochamad Hilmy
Keyword(s):  
Service Life ◽  
Probabilistic Approach ◽  
Concrete Structures ◽  
Weather Condition ◽  
Analysis Data ◽  
National Standard ◽  
Concrete Carbonation ◽  
Durability Design ◽  
Starting Point ◽  
Real Performance

The assessment of the service life of concrete structures using the durability design approach is widely accepted nowadays. It is really encouraged that a simulation model can resemble the real performance of concrete during the service life. This paper investigates the concrete carbonation through probabilistic analysis. Data regarding Indonesian construction practice were taken from Indonesian National Standard (SNI). Meanwhile, data related to Indonesian weather condition for instance humidity and temperature are taken from local Meteorological, Climatological, and Geophysical Agency from 2004 until 2016. Hopefully the results can be a starting point for durability of concrete research in Indonesia.

Recommendations for Test Lab Regarding Transition to New Requirements GOST ISO/IEC 17025–2019

2020 ◽  
Vol 86 (2) ◽  
pp. 69-78
Author(s):  
S. N. Gusarova ◽  
Yu. M. Erokhina ◽  
D. I. Kramok ◽  
E. I. Khunuzidi
Keyword(s):  
Comparative Analysis ◽  
Russian Federation ◽  
Transition Period ◽  
Process Approach ◽  
National Standard ◽  
The Novel ◽  
Self Assessment ◽  
Testing Laboratories ◽  
The Russian Federation ◽  
Practical Level

Since September 1, 2019, GOST ISO/IEC 17025–2019 has been enacted as a national standard in the Russian Federation. The novel standard imposes a number of fundamentally new requirements for testing laboratories (hereinafter referred to as the IL or laboratory), and also supplements and specifies the requirements previously regulated by GOST ISO/IEC 17025–2009. In this regard, in order to transfer laboratories to the new requirements, the FSA issued an order in August 2019 listing the mandatory activities that IL must fulfill to bring their activities in line with the new requirements. However, a transition period desired for matching these requirements is absent on a practical level for a number of the laboratories. The purpose of the article is to facilitate a gentle, efficient and pain-free move from the requirements of GOST ISO/IEC 17025–2009 to the new requirements of GOST ISO/IEC 17025–2019, including compliance with new changes in accreditation criteria. We carried out a comparative analysis of the requirements of the new and previous versions of the standard and marked each new and significant item to which the laboratory should pay attention first of all. The new standard focuses on the application of the process approach, risk and opportunity management, as well as on implementation of the policy of impartiality, independence, minimization of competitive interests and confidentiality. The article describes the planning, implementation and monitoring of each event or phase of the transition of testing laboratories to new requirements. Moreover, the recommendations on the structure of the «Quality Manual» and self-assessment on the compliance of IL activities and QMS with the new requirements, including the use of statistical methods for substantiation of the correctness of the assessment are given as an example of the implementation of IL capabilities.

DAYA SAING EKSPOR PRODUK CPO INDONESIA DAN POTENSI HILIRISASI DIOLAH MENJADI BIODIESEL

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Danar Agus Susanto
Keyword(s):  
Palm Oil ◽  
Comparative Advantage ◽  
Global Market ◽  
National Standard ◽  
Revealed Comparative Advantage ◽  
Crude Palm Oil ◽  
A Value ◽  
World Demand ◽  
Domestic Use

ABSTRACTIndonesia is the world's largest producer of crude palm oil (CPO). Even so, the trend of international trade in Indonesian CPO products has decreased in the last 10 years with a value of -10.19%. The decline in world demand for CPO can be dealt with by utilizing CPO as a biofuel for domestic use, like biodiesel. The purpose of this study is to determine the competitiveness of Indonesian CPO in global trade and determine the parameters of the quality requirements of CPO and biodiesel. The competitiveness analysis method uses the Revealed Comparative Advantage (RCA) method, while the analysis of the potential quality of CPO as a biofuel is carried out by analyzing the Indonesian National Standard (SNI). CPO trade in the global market is controlled by Indonesia with a market share of 50% and Malaysia 25.6%, with the declining trade trend in the last 10 years relatively (2010-2019) of -6.91%. The level of competitiveness of Indonesian CPO products in 2019 is very strong, but on average in the last 10 years, the level of competitiveness of Indonesian CPO is no better than that of Malaysia. Indonesia has SNI 01-2901-2006 and SNI 7182: 2015 as a determinant of the quality of CPO and biodiesel products developed in Indonesia so that the CPO and biodiesel produced fullfil sacurity and safety aspects when used by consumers.Keywords: crude palm oil (CPO), competitivenessv, quality, Indonesian National Standard (SNI) ABSTRAKIndonesia merupakan negara produsen minyak kelapa sawit mentah/ Crude Palm Oil (CPO) terbesar di dunia. Meskipun demikian, tren perdagangan internasional produk CPO Indonesia mengalami penurunan dalam sepuluh tahun terakhir dengan nilai -10,19%. Penurunan permintaan dunia terhadap CPO, dapat disiasati dengan memanfaatkan CPO sebagai bahan bakar nabati untuk keperluan dalam negeri sebagai biodiesel. Tujuan penelitian ini adalah mengetahui daya saing CPO Indonesia dalam perdagangan global dan mengetahui parameter persyaratan mutu CPO dan biodiesel. Metode analisis daya saing menggunakan metode Revealed Comparative Advantage (RCA), sedangkan analisis potensi kualitas CPO sebagai biofuel dilakukan dengan menganalisis Standar Nasional Indoensia (SNI). Perdagangan CPO dalam pasar global dikuasai oleh Indonesia dengan pangsa pasar 50% dan Malaysia 25,6%, dengan tren perdagangan relatif menurun dalam 10 tahun terakhir (2010-2019) sebesar -6,91%. Tingkat daya saing produk CPO Indonesia pada tahun 2019 sangat kuat, namun secara rata-rata dalam 10 tahun terakhir, tingkat daya saing CPO Indonesia tidak lebih baik dari Malaysia. Indonesia memiliki SNI 01-2901-2006 dan SNI 7182:2015 sebagai penentu kualitas produk CPO dan biodiesel yang dikembangkan di Indonesia, sehingga CPO dan biodiesel yang dihasilkan memenuhi aspek keamanan dan keselamatan ketika digunakan oleh konsumen.Kata kunci: crude palm oil (CPO), daya saing, kualitas, Standar Nasional Indonesia (SNI)

Innovative Thinking on the Relationship between the Provision of Local Services and Inequality in Israel

2020 ◽  
Vol 35 (3) ◽  
pp. 31-51
Author(s):  
Yoram Ida ◽  
Amir Hefetz ◽  
Assaf Meydani ◽  
Gila Menahem ◽  
Elad Cohen
Keyword(s):  
Implementation Process ◽  
Local Variation ◽  
Two Dimensions ◽  
National Standard ◽  
Local Authorities ◽  
Innovative Methodology ◽  
Local Services ◽  
Innovative Thinking ◽  
Mandatory Service ◽  
The Relationship

What innovative policy tools can be introduced so that the provision of local services will mitigate inequality among residents of different localities? Based on the ‘new localism’ approach, this article examines one such tool—a mandatory national standard for services provided by local authorities (a ‘service basket’)—and suggests that the implementation process should consider local variation and autonomy. The novelty of our approach lies in including both objective and normative considerations in the methodological instrument that we developed to capture these two dimensions. This innovative methodology also enabled us to estimate existing service gaps among local authorities and the burdens some will face upon instituting a mandatory service basket.

Особенности стандартизации химических реагентов для подготовки питьевой воды (на примере коагулянта полиоксихлорида алюминия)

2020 ◽  
Author(s):  
G. Samburskii ◽  
O. Ustinova ◽  
Svetlana, Leont’eva
Keyword(s):  
Organic Contaminants ◽  
Disperse Medium ◽  
Metal Salts ◽  
National Standard ◽  
Process Technology ◽  
Technical Regulation ◽  
Uniform Assessment ◽  
Dissolved Form ◽  
Polyaluminium Chloride

Распространенным технологическим приемом удаления из воды грубодисперсных примесей, находящихся во взвешенном состоянии, а также коллоидных органических загрязнений, присутствующих в растворенном виде, является процесс коагуляции. Эффективными коагулянтами для систем с водной дисперсионной средой являются соли поливалентных металлов. Цель работы заключалась в создании нового государственного стандарта, предназначенного для обеспечения единообразной оценки качества коагулянтов. Рассмотрена область применения коагулянтов в процессе водоподготовки и проведен их сравнительный анализ. Показана необходимость унификации в области процессов контроля качества коагулянтов. Сформулированы общие требования к контролю качества полиоксихлорида алюминия. Представлен разработанный и утвержденный новый национальный стандарт ГОСТ Р 58580-2019 Полиоксихлорид алюминия. Технические условия , который учитывает требования санитарного законодательства, технического регулирования, безопасности процессов производства и транспортировки полиоксихлорида алюминия.Coagulation process has been a widespread process technology for removing coarse suspended impurities from water, as well as colloidal organic contaminants present in dissolved form. Polyvalent metal salts are effective coagulants for the systems with aqueous disperse medium. The purpose of the work was developing a new state standard to provide for a uniform assessment of the quality of coagulants. The scope of coagulants in the process of water treatment is considered and their comparative analysis is carried out. The general requirements to the control of polyaluminium chloride quality are formulated. The developed and approved new national standard GOST R 58580-2019 Polyaluminium chloride. Technical conditions is presented that takes into account the requirements of sanitary legislation, technical regulation, safety of the processes of production and transportation of polyaluminium chloride.

Sign in / Sign up

Export Citation Format

Share Document