Features of the Synovial Fluid Film in Human Joint Lubrication

Nature ◽  
1970 ◽  
Vol 225 (5236) ◽  
pp. 956-957 ◽  
Author(s):  
P. S. WALKER ◽  
J. SIKORSKI ◽  
D. DOWSON ◽  
M. D. LONGFIELD ◽  
V. WRIGHT
Tribologia ◽  
2016 ◽  
Vol 266 (2) ◽  
pp. 159-171
Author(s):  
Krzysztof WIERZCHOLSKI ◽  
Michał SÓJKA

During classical journal bearing lubrication the lubricant viscosity is independent of physical properties of cooperating bodies, which is well known by virtue of Hersey-Stribeck (H-S) curve presenting friction coefficient vs. Hersey number = viscosity´velocity/pressure. The result obtained by the H-S is valid for two cooperating bodies with homogeneous, isotropic properties, and for Newtonian oils omitting the elastohydrodynamic effects. In the presented paper, we take into account the two cooperating human joint cartilage surfaces, which, after new AFM measurements, have non-homogeneous hypo- or hyper-elastic properties, and the synovial fluid has non-Newtonian features. Moreover, the cartilage surface during human limb motion and during the squeezing and boosted squeezing effects gains important small deformations. From the abovementioned description, it follows that the H-S result cannot be acceptable in human joint lubrication [L. 1–6]. During human joint hydrodynamic lubrication, we observe the influence of the material coefficients of the hypo- and hyper-elastic cartilage tissue on the apparent viscosity of non-Newtonian synovial fluid occupying the thin joint gap limited by the two cartilage superficial layers. This problem has not been considered in scientific papers describing the hydrodynamic lubrication of the human joint. This problem attains significant meaning because, after numerous AFM laboratory measurements confirmed by the literature achievements, it follows that the joint cartilage tissue with a thin polar membrane made of two lipid molecules has no isotropic but anisotropic properties in general. These membranes are flat sheets that form a continuous barrier around the cartilage cells. Non-homogeneous, anisotropic biological bodies as distinct from classical isotropic materials have the various values of elasticity, hypoelasticity, or hyper-elasticity modules on individual places and directions. These places, loaded by the same forces, tend to various displacements and strains. In consequence, mutually connected physical implications caused by virtue of synovial fluid flow velocity and shear rates changes, indicate to us the conclusion that the dynamic viscosity of synovial fluid gains value variations caused by the cartilage’s physical properties during human joint lubrication.


1970 ◽  
Vol 12 (5) ◽  
pp. 364-369 ◽  
Author(s):  
D. Dowson ◽  
A. Unsworth ◽  
V. Wright

The load-bearing human joint is a self-acting dynamically loaded bearing which employs a porous and elastic bearing material (articular cartilage) and a highly non-Newtonian lubricant (synovial fluid). The authors' understanding is that the human joint experiences fluid-film (including elastohydrodynamic), mixed and boundary lubrication in its various operating conditions. It has been recognized that squeeze-film action is capable of providing considerable protection to the cartilage surface once a fluid film is generated (6) (8)§. Furthermore, the possibility of an increasing concentration of hyaluronic acid in synovial fluid during the squeeze-film action due to the porous nature of the cartilage and its surface topography and the known relationship between this concentration and the effective viscosity (7) has led to the concept of ‘boosted lubrication’ as an important feature of joint behaviour (10). A mathematical analysis of the concept of boosted lubrication of human joints is presented in this paper. The predictions of the analysis are shown to be in good agreement with experimental findings (12).


Author(s):  
D. V. Davies

Synovial fluid functions both as a lubricant and as a nutritive medium in joints. Its chemical composition suggests that it is a dialysate of blood plasma with the addition of the mucosubstance, hyaluronic acid. In addition the fluid contains a small cellular component. The quantities of some of the chemical components are apparently anomalous and need explanation. The hyaluronic acid, probably combined with a small amount of protein, is believed to be secreted by the cells lining the joint cavity, the synovial cells. The volume and naked eye appearance of the fluid vary from joint to joint in the same species and in the same joint from species to species. The volume of fluid that can be aspirated from normal human joints is too small for most chemical and physical investigations and recourse must be made to fluids from the larger domestic animals and to pathological human fluids. The most characteristic property of the fluid is its viscosity. This has been investigated using the Weissenberg rheogoniometer. This allows of a study of the viscosity and elasticity of the fluids at different shear rates. Results on fluid from both normal animal joints and pathological human joints will be presented. Their relevance in joint lubrication will be discussed.


1973 ◽  
Vol 32 (6) ◽  
pp. 587-588 ◽  
Author(s):  
A Unsworth ◽  
D Dowson ◽  
V Wright

Tribologia ◽  
2016 ◽  
Vol 266 (2) ◽  
pp. 145-157 ◽  
Author(s):  
Krzysztof WIERZCHOLSKI

The surface of an articular cartilage human joint, coated with phospholipid bilayers or multi-layers, plays an important role in the surface-active phospholipid lubrication, friction, and wear during human limb movement. The biological bi-layer is a thin polar membrane composed of two layers of phospholipids that have a hydrophilic phosphate head (from the outside) and a hydrophobic tail (from the inside) consisting of two fatty acid chains. These membranes are flat sheets that form a continuous barrier around all cells. Synovial fluid (SF) in the human joint gap contains glycoprotein, lubricin (proteinglycan 4), and hyaluronidase, i.e. an enzyme that produces hialuron acid and ±10% phospholipids. Because the mechanism of surface articular phospholipid lubrication (SAPL) has been a frequently controversial subject in the past decade, this fact requires showing the hydrodynamic description in the form of a mathematical model of the abovementioned problem and its particular solution. To give a description of this model, it is necessary to recognize the variations of the dynamic viscosity of synovial fluid as a function of parameters depending on the presence of many phospholipid particles. To these parameters belong power (exponent) concentration of hydrogen ions (pH), cartilage wet ability (We), collagen fibre concentration in synovial fluid, and a created electrostatic field on the phospholipid membrane. Based on the Young-Laplace-Kelvin Law, initial achievements presented in scientific papers and our own investigations illustrated in this paper, the decrements, and increments of synovial fluid dynamic viscosities versus pH and wet ability (We) increases, simultaneously taking into account the influence of the intensity of charges in the electrostatic field. Moreover, this study considers the influence of collagen fibre concentration on the dynamic viscosity of synovial fluid. Based on initial considerations performed by virtue of the developed SAPL, it may be stated that the charge increments from low to high values of the electrostatic field is connected with viscosity increases of synovial fluid but only simultaneously with the pH index and cartilage wet ability variations.


Author(s):  
J Q Yao ◽  
A Unsworth

The asperity lubrication in human joints is examined in the present paper, with particular reference to the tertiary undulation with wavelengths of around 20–45 μm. It was found that, under dynamic physiological loading conditions, the secondary waviness of the cartilaginous surface (typically 0.5 mm wavelength) could be effectively flattened to sustain a fluid film of 0.1–0.3 μm thick, while the tertiary waviness could be squashed to sustain a much thinner fluid film of 0.01 μm (10 nm) thick with normal synovial fluid as the lubricant. The calculated film thickness for the tertiary undulation was less than 5 nm when the ankle joint was lubricated by Ringer's solution or pathological synovial fluids, or when only quasi-static loading conditions were considered, while a sufficiently thick fluid film could still be formed when the secondary undulations were considered alone. It was thus suggested that the fluid film lubrication mechanism was operative for human joints with normal synovial fluid as the lubricant under physiological dynamic loading conditions and the mixed lubrication mechanism could take over when static loading conditions prevailed or when watery lubricants (n ≈ 0.001 Pas) were used.


1975 ◽  
Vol 34 (4) ◽  
pp. 277-285 ◽  
Author(s):  
A Unsworth ◽  
D Dowson ◽  
V Wright

1982 ◽  
Vol 104 (2) ◽  
pp. 168-172 ◽  
Author(s):  
Prawal Sinha ◽  
Chandan Singh

This paper presents a theoretical analysis of lubrication of rolling contact bearings considering cavitation with a non-Newtonian lubricant, obeying the power law model. Piezo-viscous and deformation effects are neglected. The analysis reveals, that as the flow behavior index increases, the load capacity increases and the point of cavitation as well as the point of maximum pressure is shifted towards the center of contact. It is also indicated that the present analysis may be considered as providing an approximation to human joint lubrication problem.


Sign in / Sign up

Export Citation Format

Share Document