scholarly journals Distilling nanoscale heterogeneity of amorphous silicon using tip-enhanced Raman spectroscopy (TERS) via multiresolution manifold learning

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Guang Yang ◽  
Xin Li ◽  
Yongqiang Cheng ◽  
Mingchao Wang ◽  
Dong Ma ◽  
...  

AbstractAccurately identifying the local structural heterogeneity of complex, disordered amorphous materials such as amorphous silicon is crucial for accelerating technology development. However, short-range atomic ordering quantification and nanoscale spatial resolution over a large area on a-Si have remained major challenges and practically unexplored. We resolve phonon vibrational modes of a-Si at a lateral resolution of <60 nm by tip-enhanced Raman spectroscopy. To project the high dimensional TERS imaging to a two-dimensional manifold space and categorize amorphous silicon structure, we developed a multiresolution manifold learning algorithm. It allows for quantifying average Si-Si distortion angle and the strain free energy at nanoscale without a human-specified physical threshold. The multiresolution feature of the multiresolution manifold learning allows for distilling local defects of ultra-low abundance (< 0.3%), presenting a new Raman mode at finer resolution grids. This work promises a general paradigm of resolving nanoscale structural heterogeneity and updating domain knowledge for highly disordered materials.

2020 ◽  
Author(s):  
Guang Yang ◽  
Xin Li ◽  
Yongqiang Cheng ◽  
Mingchao Wang ◽  
Dong Ma ◽  
...  

Abstract Accurately identifying the local structural heterogeneity of complex, disordered amorphous materials such as amorphous silicon (a-Si) is crucial for accelerating technology development. However, short-range atomic ordering quantification and nanoscale spatial resolution over a large area on a-Si have remained major challenges and practically unexplored. We resolve phonon vibrational modes of a-Si at a lateral resolution of 20 nm by tip-enhanced Raman spectroscopy (TERS). To project the high dimensional TERS imaging to a low dimensional (i.e. 2D) manifold space and categorize a-Si structure, we developed a multiresolution manifold learning (MML) algorithm. It allows for quantifying average Si-Si distortion angle and the strain free energy at nanoscale without a human-specified threshold. The MML multiresolution feature allows for distilling local defects of ultra-low abundance (< 0.3%), presenting a new Raman mode at finer resolution grids. This work promises a general paradigm of resolving nanoscale structural heterogeneity and updating domain knowledge for highly disordered materials.


2016 ◽  
Vol 29 (7) ◽  
pp. 1603601 ◽  
Author(s):  
Kyoung-Duck Park ◽  
Markus B. Raschke ◽  
Joanna M. Atkin ◽  
Young Hee Lee ◽  
Mun Seok Jeong

2012 ◽  
Vol 263-266 ◽  
pp. 2126-2130 ◽  
Author(s):  
Zhi Gang Lou ◽  
Hong Zhao Liu

Manifold learning is a new unsupervised learning method. Its main purpose is to find the inherent law of generated data sets. Be used for high dimensional nonlinear fault samples for learning, in order to identify embedded in high dimensional data space in the low dimensional manifold, can be effective data found the essential characteristics of fault identification. In many types of fault, sometimes often failure and normal operation of the equipment of some operation similar to misjudgment, such as oil pipeline transportation process, pipeline regulating pump, adjustable valve, pump switch, normal operation and pipeline leakage fault condition similar spectral characteristics, thus easy for pipeline leakage cause mistakes. This paper uses the manifold learning algorithm for fault pattern clustering recognition, and through experiments on the algorithm is evaluated.


2017 ◽  
Vol 29 (7) ◽  
Author(s):  
Kyoung-Duck Park ◽  
Markus B. Raschke ◽  
Joanna M. Atkin ◽  
Young Hee Lee ◽  
Mun Seok Jeong

2020 ◽  
Vol 90 (3) ◽  
pp. 30502
Author(s):  
Alessandro Fantoni ◽  
João Costa ◽  
Paulo Lourenço ◽  
Manuela Vieira

Amorphous silicon PECVD photonic integrated devices are promising candidates for low cost sensing applications. This manuscript reports a simulation analysis about the impact on the overall efficiency caused by the lithography imperfections in the deposition process. The tolerance to the fabrication defects of a photonic sensor based on surface plasmonic resonance is analysed. The simulations are performed with FDTD and BPM algorithms. The device is a plasmonic interferometer composed by an a-Si:H waveguide covered by a thin gold layer. The sensing analysis is performed by equally splitting the input light into two arms, allowing the sensor to be calibrated by its reference arm. Two different 1 × 2 power splitter configurations are presented: a directional coupler and a multimode interference splitter. The waveguide sidewall roughness is considered as the major negative effect caused by deposition imperfections. The simulation results show that plasmonic effects can be excited in the interferometric waveguide structure, allowing a sensing device with enough sensitivity to support the functioning of a bio sensor for high throughput screening. In addition, the good tolerance to the waveguide wall roughness, points out the PECVD deposition technique as reliable method for the overall sensor system to be produced in a low-cost system. The large area deposition of photonics structures, allowed by the PECVD method, can be explored to design a multiplexed system for analysis of multiple biomarkers to further increase the tolerance to fabrication defects.


2008 ◽  
Author(s):  
K. J. Yi ◽  
X. N. He ◽  
W. Q. Yang ◽  
Y. S. Zhou ◽  
W. Xiong ◽  
...  

2014 ◽  
Vol 39 (12) ◽  
pp. 2077-2089
Author(s):  
Min YUAN ◽  
Lei CHENG ◽  
Ran-Gang ZHU ◽  
Ying-Ke LEI

2013 ◽  
Vol 32 (6) ◽  
pp. 1670-1673
Author(s):  
Xue-yan ZHOU ◽  
Jian-min HAN ◽  
Yu-bin ZHAN

Sign in / Sign up

Export Citation Format

Share Document