scholarly journals Topological pruning enables ultra-low Rayleigh scattering in pressure-quenched silica glass

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Yongjian Yang ◽  
Osamu Homma ◽  
Shingo Urata ◽  
Madoka Ono ◽  
John C. Mauro

Abstract Silica glass is the most indispensable material in optical communication applications due to its superior optical properties. The transmission loss of silica glass has been reduced over the past 30 years by continuous efforts toward decreasing density fluctuations by lowering of fictive temperature, e.g., through improvements in processing or doping. A recent study has shown that shrinkage of structural voids by hot compression is a promising way to further decrease the loss. However, an atomic understanding of the pressure effect is still lacking. Here, using molecular simulations, we connect the void shrinkage to topological pruning of silica network. Two physical models predict that the Rayleigh scattering loss of pressure-quenched silica glass can be reduced by >50% when the glass is quenched at an appropriate pressure (4 GPa in our simulation). Our studies are consistent with available experimental results and demonstrate topologically optimized structure can give desirable properties for optical applications of silica as well as other glasses with similar network structure.

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Hesham Sakr ◽  
Yong Chen ◽  
Gregory T. Jasion ◽  
Thomas D. Bradley ◽  
John R. Hayes ◽  
...  

AbstractFor over 50 years, pure or doped silica glass optical fibres have been an unrivalled platform for the transmission of laser light and optical data at wavelengths from the visible to the near infra-red. Rayleigh scattering, arising from frozen-in density fluctuations in the glass, fundamentally limits the minimum attenuation of these fibres and hence restricts their application, especially at shorter wavelengths. Guiding light in hollow (air) core fibres offers a potential way to overcome this insurmountable attenuation limit set by the glass’s scattering, but requires reduction of all the other loss-inducing mechanisms. Here we report hollow core fibres, of nested antiresonant design, with losses comparable or lower than achievable in solid glass fibres around technologically relevant wavelengths of 660, 850, and 1060 nm. Their lower than Rayleigh scattering loss in an air-guiding structure offers the potential for advances in quantum communications, data transmission, and laser power delivery.


2018 ◽  
Vol 26 (7) ◽  
pp. 7942 ◽  
Author(s):  
Madoka Ono ◽  
Shuhei Aoyama ◽  
Masanori Fujinami ◽  
Setsuro Ito

Author(s):  
Tomoya Okazaki ◽  
Chiaki Otsuka ◽  
Edson Haruhico Sekiya ◽  
Kota Kawai ◽  
Masato Mizusaki ◽  
...  

Abstract We present the first demonstration of visible laser oscillation in the Dy3+-doped silica fiber pumped by a 451nm InGaN laser diode. It was found that Ge-co-doping plays the following important roles of laser oscillation: (1) to reduce the Rayleigh scattering loss, (2) to suppress the X-ray-induced and pump-induced photodarkening (PD), and (3) to increase lasing slope efficiency. In a fiber with 0.46wt% Dy, 1.8 wt% Ge, and 0.54wt% Al, the slope efficiency is 22.0 % at 582.5 nm, and the maximum output power is 18.4 mW.


Sensors ◽  
2019 ◽  
Vol 19 (15) ◽  
pp. 3383 ◽  
Author(s):  
Yu Xin ◽  
Gregory Pandraud ◽  
Yongmeng Zhang ◽  
Paddy French

In this paper, we propose a novel vertical SU-8 waveguide for evanescent analyte sensing. The waveguide is designed to possess a vertical and narrow structure to generate evanescent waves on both sides of the waveguide’s surface, aimed at increasing the sensitivity by enlarging the sensing areas. We performed simulations to monitor the influence of different parameters on the waveguide’s performance, including its height and width. E-beam lithography was used to fabricate the structure, as this one-step direct writing process enables easy, fast, and high-resolution fabrication. Furthermore, it reduces the sidewall roughness and decreases the induced scattering loss, which is a major source of waveguide loss. Couplers were added to improve the coupling efficiency and alignment tolerance, and will contribute to the feasibility of a plug-and-play optical system. Optical measurements show that the transmission loss is 1.03 ± 0.19 dB/cm. The absorption sensitivity was measured to be 4.8 dB per refractive index unit (dB/RIU) for saline solutions with various concentrations.


2020 ◽  
Vol 10 (19) ◽  
pp. 6828
Author(s):  
Malte Misol

This work deals with the reduction of aircraft interior noise using active sidewall panels (linings). Research work done in the past showed that considerable reductions of the sound pressure level (SPL) in the cabin are possible using structural actuators mounted on the lining and error microphones distributed in front of the linings. However, microphones are undesirable for error sensing because they are not suitable for the realisation of an integrated and autonomous active lining (smart lining module). Therefore, the goal of the present work is the replacement of the microphones by structural sensors. Using the structural sensors as remote sensors in combination with an acoustic filter, virtual microphones can be defined. The present study relies on experimental data of a double-walled fuselage system which is mounted in a sound transmission loss facility. Simulation results based on measured time data and identified frequency response functions are provided. Different configurations of virtual microphones are investigated regarding the SPL reduction and the induced vibration of the lining panel.


2017 ◽  
Vol 8 (3) ◽  
pp. 285-290 ◽  
Author(s):  
Matthieu Lancry ◽  
B. Hari Babu ◽  
Nadège Ollier ◽  
Bertrand Poumellec

Sign in / Sign up

Export Citation Format

Share Document