scholarly journals Laser-sound: optoacoustic transduction from digital audio streams

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Konstantinos Kaleris ◽  
Björn Stelzner ◽  
Panagiotis Hatziantoniou ◽  
Dimosthenis Trimis ◽  
John Mourjopoulos

AbstractThis work presents a novel laser-based optoacoustic transducer capable of reproducing controlled and continuous sound of arbitrary complexity in the air or on solid targets. Light-to-sound transduction is achieved via laser-induced breakdown, leading to the formation of plasma acoustic sources in any desired spatial location. The acoustic signal is encoded into pulse streams via a discrete-time audio modulation and is reproduced by fast consecutive excitation of the target medium with appropriately modulated laser pulses. This results in the signal being directly reconstructed at the desired location of the target medium without the need for a receiver or demodulation device. In this work, the principles and evaluation results of such a novel laser-sound prototype system are presented. The performance of the prototype is evaluated by systematic experimental measurements of audio test signals, from which the basic acoustical response is derived. Moreover, a generic computational model is presented that allows for the simulation of laser-sound reproduction of 1-bit or multibit audio streams. The model evaluations are validated by comparison with the acoustic measurements, whereby a good agreement is found. Finally, the computational model is used to simulate an ideal optoacoustic transducer based on the specifications of state-of-the-art commercially available lasers.

1980 ◽  
Vol 58 (2) ◽  
pp. 153-163
Author(s):  
J. Santiago ◽  
A. M. Robinson

CO2 laser induced breakdown of argon is investigated as a function of pressure and preionization. The gas is preionized by uv photons from an electric discharge. By varying the time between the discharge and laser pulses, initial densities in the focal region vary from 109 cm−3 to 1012 cm−3. Numerical calculations of the breakdown process based on a cascade model yield thresholds which are in good agreement with measurements.


Author(s):  
A.A. Ilyin ◽  
◽  
K.A. Shmirko ◽  
S.S. Golik ◽  
D.Yu. Proschenko ◽  
...  

A numerical model describing the dynamics of plasma particle density upon filamentation of femtosecond radiation in the air is presented. The simulation results are in good agreement with the experimental data. The pumping processes of the N2 and N2+ radiative levels are investigated. The model predicts a sharp drop in electron temperature and density within 1 ns. For the first positive nitrogen system, an excess of the population of the upper radiation level over the population of the lower one is observed for 550 ps.


Author(s):  
Nagaraju Guthikonda ◽  
Sai Shiva S ◽  
E. Manikanta ◽  
Kameswari P S L D ◽  
V. R. Ikkurthi ◽  
...  

Abstract We present results on the dynamics of laser-induced blow-off shockwave generation from the rear side of 20 µm thick aluminum and copper foil confined with a glass (BK7) substrate. These foils are irradiated by 10 ns, 532 nm laser pulses of energy 25 – 200 mJ corresponding to the intensity range 0.2 – 10 GW/cm2. The plasma temperature at the glass-foil interface is observed to play an important role in the coupling of laser energy to the foil. From our experiments and 1D hydrodynamic simulations, we confirm that moving the glass-foil interface away from the focal plane led to (a) enhanced absorption of the laser beam by the foil resulting in ~ 30 % higher blow-off shock velocities (b) significant changes in the material ejection in terms of increased blow-off mass of the foil (c) lower plasma density and temperatures. The material ejection as well as blow-off shock velocity is higher for Al compared to Cu. The simulated shock evolution in ambient air shows a reasonably good agreement with the experimental results.


Electronics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 710
Author(s):  
Paulius Butkus ◽  
Sonata Tolvaišienė ◽  
Sebastjanas Kurčevskis

In this paper, we present an analysis and a validation of a simulation program with integrated circuit emphasis (SPICE) model for a pulse forming circuit of a high frequency electroporation system, which can deliver square-wave sub-microsecond (100–900 ns) electric field pulses. The developed SPICE model is suggested for use in evaluation of transient processes that occur due to high frequency operations in prototype systems. A controlled crowbar circuit was implemented to support a variety of biological loads and to ensure a constant electric pulse rise and fall time during electroporation to be independent of the applied buffer bioimpedance. The SPICE model was validated via a comparison of the simulation and experimental results obtained from the already existing prototype system. The SPICE model results were in good agreement with the experimental results, and the model complexity was found to be sufficient for analysis of transient processes. As result, the proposed SPICE model can be useful for evaluation and compensation of transient processes in sub-microsecond pulsed power set-ups during the development of new prototypes.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Wosik Cho ◽  
Sung In Hwang ◽  
Chang Hee Nam ◽  
Mina R. Bionta ◽  
Philippe Lassonde ◽  
...  

Abstract To generalize the applicability of the temporal characterization technique called “tunneling ionization with a perturbation for the time-domain observation of an electric field” (TIPTOE), the technique is examined in the multicycle regime over a broad wavelength range, from the UV to the IR range. The technique is rigorously analyzed first by solving the time-dependent Schrödinger equation. Then, experimental verification is demonstrated over an almost 5-octave wavelength range at 266, 1800, 4000 and 8000 nm by utilizing the same nonlinear medium – air. The experimentally obtained dispersion values of the materials used for the dispersion control show very good agreement with the ones calculated using the material dispersion data and the pulse duration results obtained for 1800 and 4000 nm agree well with the frequency-resolved optical gating measurements. The universality of TIPTOE arises from its phase-matching-free nature and its unprecedented broadband operation range.


2019 ◽  
Vol 52 (50) ◽  
pp. 505204
Author(s):  
Steve Rudz ◽  
Maxime Wartel ◽  
Stéphane Pellerin ◽  
Jean-Luc Hanus

2015 ◽  
Vol 17 (2) ◽  
pp. 147-152 ◽  
Author(s):  
Jie Shen ◽  
Zhengcai Yang ◽  
Xiaoliang Liu ◽  
Yanchao Shi ◽  
Peixi Zhao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document