scholarly journals Metal organic framework derived NaCoxOy for room temperature hydrogen sulfide removal

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nishesh Kumar Gupta ◽  
Jiyeol Bae ◽  
Kwang Soo Kim
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Metal Organic Framework ◽  
Maximum Adsorption Capacity ◽  
Xps Analysis ◽  
Hydrogen Sulfide Removal ◽  
Metal Organic ◽  
Moist Condition ◽  
S Oxidation

AbstractNovel NaCoxOy adsorbents were fabricated by air calcination of (Na,Co)-organic frameworks at 700 °C. The NaCoxOy crystallized as hexagonal microsheets of 100–200 nm thickness with the presence of some polyhedral nanocrystals. The surface area was in the range of 1.15–1.90 m2 g−1. X-ray photoelectron spectroscopy (XPS) analysis confirmed Co2+ and Co3+ sites in MOFs, which were preserved in NaCoxOy. The synthesized adsorbents were studied for room-temperature H2S removal in both dry and moist conditions. NaCoxOy adsorbents were found ~ 80 times better than the MOF precursors. The maximum adsorption capacity of 168.2 mg g−1 was recorded for a 500 ppm H2S concentration flowing at a rate of 0.1 L min−1. The adsorption capacity decreased in the moist condition due to the competitive nature of water molecules for the H2S-binding sites. The PXRD analysis predicted Co3S4, CoSO4, Co3O4, and Co(OH)2 in the H2S-exposed sample. The XPS analysis confirmed the formation of sulfide, sulfur, and sulfate as the products of H2S oxidation at room temperature. The work reported here is the first study on the use of NaCoxOy type materials for H2S remediation.

scholarly journals Fabrication of Carboxymethylcellulose/Metal-Organic Framework Beads for Removal of Pb(II) from Aqueous Solution

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 942 ◽  
Author(s):  
Huo-Xi Jin ◽  
Hong Xu ◽  
Nan Wang ◽  
Li-Ye Yang ◽  
Yang-Guang Wang ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Langmuir Isotherm ◽  
Adsorption Equilibrium ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Metal Organic ◽  
Langmuir Isotherm Model

The ability to remove toxic heavy metals, such as Pb(II), from the environment is an important objective from both human-health and ecological perspectives. Herein, we describe the fabrication of a novel carboxymethylcellulose-coated metal organic material (MOF-5–CMC) adsorbent that removed lead ions from aqueous solutions. The adsorption material was characterized by Fourier-transform infrared spectroscopy, X-ray diffractometry, scanning electron microscopy, and X-ray photoelectron spectroscopy. We studied the functions of the contact time, pH, the original concentration of the Pb(II) solution, and adsorption temperature on adsorption capacity. MOF-5–CMC beads exhibit good adsorption performance; the maximum adsorption capacity obtained from the Langmuir isotherm-model is 322.58 mg/g, and the adsorption equilibrium was reached in 120 min at a concentration of 300 mg/L. The adsorption kinetics is well described by pseudo-second-order kinetics, and the adsorption equilibrium data are well fitted to the Langmuir isotherm model (R2 = 0.988). Thermodynamics experiments indicate that the adsorption process is both spontaneous and endothermic. In addition, the adsorbent is reusable. We conclude that MOF-5–CMC is a good adsorbent that can be used to remove Pb(II) from aqueous solutions.

scholarly journals Synergistic effect of carboxyl and sulfate groups for effective removal of radioactive strontium ion in a Zr-metal-organic framework

2021 ◽  
Author(s):  
Lin Ren ◽  
Xudong Zhao ◽  
Baosheng Liu ◽  
Hongliang Huang
Keyword(s):  
Adsorption Capacity ◽  
High Efficiency ◽  
Metal Organic Framework ◽  
Maximum Adsorption Capacity ◽  
Potential Candidate ◽  
Dual Groups ◽  
Metal Organic ◽  
Strontium Ion ◽  
Rapid Adsorption ◽  
Organic Framework

Abstract Rapid removal of radioactive strontium from nuclear wastewater is of great significance for environment safety and human health. This work reported the effective adsorption of strontium ion in a stable dual-group metal-organic framework, Zr6(OH)14(BDC-(COOH)2)4(SO4)0.75 (Zr-BDC-COOH-SO4), which contains strontium-chelating groups (-COOH and SO4) and strongly ionizable group (-COOH). Zr-BDC-COOH-SO4 exhibits very rapid adsorption kinetics (<5 min) and a maximum adsorption capacity of 67.5 mg g−1. The adsorption behaviors can be well evaluated by pseudo-second-order model and Langmuir isotherm model. Further investigations indicate that the adsorption of Sr2+ in Zr-BDC-COOH-SO4 would not be interfered by solution pH and adsorption temperature obviously. Feasible regeneration of the adsorbent was also demonstrated through a simple elution method. Mechanism investigation suggests that free -COOH contributes to the rapid adsorption based on electrostatic interaction while introduction of -SO4 can enhance the adsorption capacity largely. Thus, these results suggest that Zr-BDC-COOH-SO4 might be a potential candidate for Sr2+ removal and introducing dual groups is an effective strategy for designing high-efficiency adsorbents.

scholarly journals Study of the adsorption of an organic pollutant onto a microporous metal organic framework

2020 ◽  
Author(s):  
Mansouri Taki Eddine Mohammed ◽  
Nibou Djamel ◽  
Trari Mohamed ◽  
Samira Amokrane
Keyword(s):  
Methyl Orange ◽  
Adsorption Capacity ◽  
Active Sites ◽  
Physical Adsorption ◽  
Metal Organic Framework ◽  
Specific Interaction ◽  
Maximum Adsorption Capacity ◽  
Film Diffusion ◽  
Metal Organic ◽  
Organic Framework

Abstract In this study, the microporous Metal Organic Framework-5 (MOF-5) has been synthesized to be used to remove methyl orange by adsorption. The adsorption experiments exhibit a good adsorption capacity at a catalyst dose of 0.1 g L−1 and for an initial concentration of 200 mg L−1, whereas the performance is stable over a wide pH range. The equilibrium adsorption data showed a sigmoidal course, which is well fitted by the Dubinin-Astakhov model applicable for physical adsorption processes (E = 0.055 kJ mol−1) onto heterogeneous surfaces and a more homogeneous pore structure (n = 9.9), with a maximum adsorption capacity of 1248.35 mg g−1. As can be observed from the evaluation of the kinetic data, the surface of the adsorbent is heterogeneous with different active sites for Methyl Orange (MO) adsorption. Moreover, based on the rate constant, it can be suggested that there is a specific interaction like electrostatic interaction between MO and the adsorbent for rapid and high uptake of the dye, whereas the adsorption phenomenon is reversible. According to the adsorption mechanisms, intra-particle and film diffusion models simultaneously controlled the rate sorption, which was confirmed by the calculated intra-particle diffusion and the film diffusion coefficients. The evaluation of the thermodynamic parameters revealed that the MO adsorption is spontaneous, endothermic and the randomness increases with the adsorption of MO.

A polyether amine modified metal organic framework enhanced the CO2 adsorption capacity of room temperature porous liquids

2019 ◽  
Vol 55 (87) ◽  
pp. 13179-13182 ◽  
Author(s):  
Xuemei Zhao ◽  
Yihui Yuan ◽  
Peipei Li ◽  
Zenjun Song ◽  
Chunxin Ma ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Room Temperature ◽  
Co2 Adsorption ◽  
Metal Organic Framework ◽  
Uptake Capacity ◽  
Metal Organic ◽  
Co2 Adsorption Capacity ◽  
Organic Framework

A room-temperature MOF-based porous liquid was prepared and showed an outstanding CO2 uptake capacity.

scholarly journals The Effects of Functional Groups and Missing Linkers on the Adsorption Capacity of Aromatic Hydrocarbons in UiO-66 Thin Films

Inorganics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 1
Author(s):  
Jennifer Shankwitz ◽  
Daniel Speed ◽  
Dillon Sinanan ◽  
Greg Szulczewski
Keyword(s):  
Thin Films ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Photoelectron Spectroscopy ◽  
Metal Organic Framework ◽  
High Vacuum ◽  
X Ray ◽  
Porous Thin Films ◽  
Henry's Constants ◽  
Metal Organic

The adsorption of benzene, toluene, ethylbenzene, and xylene isomers, also known as BTEX, from the gas phase into porous thin films of the metal–organic framework UiO-66-X, where X = H, NH2, and NO2, was measured to quantify adsorption capacity. The thin films were grown by a vapor-conversion method onto Au-coated quartz microbalance crystals. The MOF thin films were characterized by IR and Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. The thin films were activated by heating under high vacuum and exposed to each gas to calculate the Henry’s constant. The results demonstrate that the functional groups in the organic linker and missing-linkers both play important roles in the adsorption capacity. Several trends can be observed in the data. First, all the compounds in the BTEX family have lower Henry’s constants in the UiO-66-H films compared to the UiO-66-NH2 and UiO-66-NO2 films, which can largely be attributed to the absence of a functional group on the linker. Second, at 25 °C, the Henry’s constants for all the BTEX compounds in UiO-66-NO2 films are larger than UiO-66-NH2 films. Third, the role of missing linkers is addressed by comparing the measured adsorption capacity to ideal pore filling. The results show that the UiO-66-H films are the most defect-free and the UiO-66-NO2 films have the most missing linker defects.

Bimetallic Ag-Cu-trimesate metal-organic framework for hydrogen sulfide removal

2021 ◽  
Author(s):  
Nishesh Kumar Gupta ◽  
Jiyeol Bae ◽  
Kwang Soo Kim
Keyword(s):  
Hydrogen Sulfide ◽  
Uniform Distribution ◽  
Room Temperature ◽  
Metal Organic Framework ◽  
Sulfide Removal ◽  
Hydrogen Sulfide Removal ◽  
Metal Organic ◽  
Organic Framework

Here, we have fabricated a bimetallic Ag-Cu-trimesate metal-organic framework at room temperature. The MOF showed rod-like morphology with uniform distribution of Ag and Cu-sites in the MOF. The MOF has...

scholarly journals Pristine and Magnetic Kenaf Fiber Biochar for Cd2+ Adsorption from Aqueous Solution

2021 ◽  
Vol 18 (15) ◽  
pp. 7949
Author(s):  
Anwar Ameen Hezam Saeed ◽  
Noorfidza Yub Harun ◽  
Suriati Sufian ◽  
Muhammad Roil Bilad ◽  
Zaki Yamani Zakaria ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Textural Properties ◽  
Ion Concentration ◽  
Solution Temperature ◽  
Maximum Adsorption Capacity ◽  
Magnetic Biochar ◽  
X Ray ◽  
Study Results ◽  
Capacity Surface

Development of strategies for removing heavy metals from aquatic environments is in high demand. Cadmium is one of the most dangerous metals in the environment, even under extremely low quantities. In this study, kenaf and magnetic biochar composite were prepared for the adsorption of Cd2+. The synthesized biochar was characterized using (a vibrating-sample magnetometer VSM), Scanning electron microscopy (SEM), X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The adsorption batch study was carried out to investigate the influence of pH, kinetics, isotherm, and thermodynamics on Cd2+ adsorption. The characterization results demonstrated that the biochar contained iron particles that help in improving the textural properties (i.e., surface area and pore volume), increasing the number of oxygen-containing groups, and forming inner-sphere complexes with oxygen-containing groups. The adsorption study results show that optimum adsorption was achieved under pH 5–6. An increase in initial ion concentration and solution temperature resulted in increased adsorption capacity. Surface modification of biochar using iron oxide for imposing magnetic property allowed for easy separation by external magnet and regeneration. The magnetic biochar composite also showed a higher affinity to Cd2+ than the pristine biochar. The adsorption data fit well with the pseudo-second-order and the Langmuir isotherm, with the maximum adsorption capacity of 47.90 mg/g.

scholarly journals Highly Efficient Adsorption of Aqueous Pb(II) with Mesoporous Metal-Organic Framework-5: An Equilibrium and Kinetic Study

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
José María Rivera ◽  
Susana Rincón ◽  
Cherif Ben Youssef ◽  
Alejandro Zepeda
Keyword(s):  
Kinetic Study ◽  
Photoelectron Spectroscopy ◽  
Metal Organic Framework ◽  
Isotherm Models ◽  
Ionic Exchange ◽  
Order Kinetic ◽  
X Ray ◽  
Metal Organic ◽  
Mesoporous Metal ◽  
Organic Framework

Mesoporous metal-organic framework-5 (MOF-5), with the composition Zn4O(BDC)3, showed a high capacity for the adsorptive removal of Pb(II) from 100% aqueous media. After the adsorption process, changes in both morphology and composition were detected using a scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) system, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analysis. The experimental evidence showed that Zn(II) liberation from MOF-5 structure was provoked by the water effect demonstrating that Pb(II) removal is not due to ionic exchange with Zn. A kinetic study showed that Pb(II) removal was carried out in 30 min with a behavior of pseudo-second-order kinetic model. The experimental data on Pb(II) adsorption were adequately fit by both the Langmuir and BET isotherm models with maximum adsorption capacities of 658.5 and 412.7 mg/g, respectively, at pH 5 and 45°C. The results of this work demonstrate that the use of MOF-5 has great potential for applications in environmental protection, especially regarding the removal of the lead present in industrial wastewaters and tap waters.

Sign in / Sign up

Export Citation Format

Share Document