scholarly journals Fabrication of Carboxymethylcellulose/Metal-Organic Framework Beads for Removal of Pb(II) from Aqueous Solution

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 942 ◽  
Author(s):  
Huo-Xi Jin ◽  
Hong Xu ◽  
Nan Wang ◽  
Li-Ye Yang ◽  
Yang-Guang Wang ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Langmuir Isotherm ◽  
Adsorption Equilibrium ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Metal Organic ◽  
Langmuir Isotherm Model

The ability to remove toxic heavy metals, such as Pb(II), from the environment is an important objective from both human-health and ecological perspectives. Herein, we describe the fabrication of a novel carboxymethylcellulose-coated metal organic material (MOF-5–CMC) adsorbent that removed lead ions from aqueous solutions. The adsorption material was characterized by Fourier-transform infrared spectroscopy, X-ray diffractometry, scanning electron microscopy, and X-ray photoelectron spectroscopy. We studied the functions of the contact time, pH, the original concentration of the Pb(II) solution, and adsorption temperature on adsorption capacity. MOF-5–CMC beads exhibit good adsorption performance; the maximum adsorption capacity obtained from the Langmuir isotherm-model is 322.58 mg/g, and the adsorption equilibrium was reached in 120 min at a concentration of 300 mg/L. The adsorption kinetics is well described by pseudo-second-order kinetics, and the adsorption equilibrium data are well fitted to the Langmuir isotherm model (R2 = 0.988). Thermodynamics experiments indicate that the adsorption process is both spontaneous and endothermic. In addition, the adsorbent is reusable. We conclude that MOF-5–CMC is a good adsorbent that can be used to remove Pb(II) from aqueous solutions.

Adsorption and Deposition of Cu (II) on Modified Valonia Tannin

2009 ◽  
Vol 620-622 ◽  
pp. 555-558
Author(s):  
Yi Li ◽  
Xue Gang Luo ◽  
Zhao Liu ◽  
Yan Huang ◽  
Xiao Yan Long
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Mannich Reaction ◽  
Langmuir Isotherm ◽  
Freundlich Isotherm ◽  
Heterogeneous Surface ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model

The modified valonian tannin was prepared through sulfonated-mannich reaction and used to adsorb Cu (II) from the aqueous solutions. The adsorption capacity rapidly reached equilibrium within 2 hours. The effect of pH on adsorption was apparent, the amount of adsorption increased significantly as the pH increased from 2.0 to 4.0 and then leveled off at pH 4.0-6.0. Equilibrium data fitted well with Freundlich isotherm model compared to Langmuir isotherm model, indicating that adsorption takes place on heterogeneous surface of the modified valonia tannin. The adsorption capacity was increased by increasing initial concentrations. The maximum adsorption capacity of cooper ion was determined to be 56.200 mg/g at 100 mg/L concentration.

scholarly journals Isolasi Kitosan Dari Tudung Jamur Merang (Vollvariella Volvaceae) Dan Aplikasinya Sebagai Absorben Logam Timbal (Pb)

2018 ◽  
Vol 6 (1) ◽  
pp. 44-50
Author(s):  
Matheis F.J.D.P. Tanasale ◽  
Adriani Bandjar ◽  
Natasya Sewit
Keyword(s):  
Experimental Data ◽  
Molecular Weight ◽  
Adsorption Capacity ◽  
Langmuir Isotherm ◽  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
Langmuir Isotherm Model ◽  
Ftir Spectrophotometry ◽  
Chitin And Chitosan

Chitosan isolated from mushroom (Vollariella volvaceae) as adsorbent of lead (Pb) metal has been done.  The isolation of chitosan was obtained 2.94% from total weight of mushroom.  Fungtional groups of chitin and chitosan were indentified by using FTIR spectrophotometry.  The chitosan had 74.66% degree of deacetylation and 2.09 x 104 g/mol viscosity molecular weight.  The experimental data of the chitosan as adsorbent for Pb metal were correlated with the Langmuir and Freundlich isotherm model.  The maximum adsorption capacity of Pb based on the Langmuir isotherm model was 2.66 mg/g.

scholarly journals Adsorption Of No3--N And Po43--P in Aqueous Solution Using Granular Activated Charcoal (Gac)

2018 ◽  
Vol 15 (2) ◽  
pp. 6296-6305
Author(s):  
Yong Pyo Hong ◽  
Keon Sang Ryoo
Keyword(s):  
Adsorption Capacity ◽  
Activated Charcoal ◽  
Langmuir Isotherm ◽  
Adsorption Equilibrium ◽  
Isotherm Model ◽  
Bet Surface Area ◽  
Batch Adsorption ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Agitation Time

In this study, adsorption of NO3- -N and PO43--P on granular activated charcoal (GAC) was investigated depending on pH, agitation time, GAC dosage, adsorption capacity and adsorption isotherms by employing batch adsorption type. The GAC was characterized by thermogravimetric analysis (TG-DTA), scanning electron micrograph coupled with energy-dispersive X-ray spectroscopy (SEM-EDX) and BET surface area analyzer. The GAC exhibited nearly similar adsorption equilibrium time. Both NO3--N and PO43—P appeared to approach equilibrium after approximately 4 h of agitation time. In the adsorption equilibrium, the removal efficiencies of NO3- -N and PO43--P were found to be 14.6-66.0 % and 52.4-99.0 %, respectively. The adsorption data for NO3--N and PO43--P was correlated to Freundlich and Langmuir isotherm model and the equilibrium data was fitted well to the Langmuir isotherm model due to their higher correlation coefficient (R2) value. The Langmuir adsorption capacity was 1.54 and 2.56 mg g-1 for NO3--N and PO43--P, respectively, which suggests that the GAC is a good adsorbent for removal of NO3--N and PO43—P from water.

scholarly journals Pristine and Magnetic Kenaf Fiber Biochar for Cd2+ Adsorption from Aqueous Solution

2021 ◽  
Vol 18 (15) ◽  
pp. 7949
Author(s):  
Anwar Ameen Hezam Saeed ◽  
Noorfidza Yub Harun ◽  
Suriati Sufian ◽  
Muhammad Roil Bilad ◽  
Zaki Yamani Zakaria ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Textural Properties ◽  
Ion Concentration ◽  
Solution Temperature ◽  
Maximum Adsorption Capacity ◽  
Magnetic Biochar ◽  
X Ray ◽  
Study Results ◽  
Capacity Surface

Development of strategies for removing heavy metals from aquatic environments is in high demand. Cadmium is one of the most dangerous metals in the environment, even under extremely low quantities. In this study, kenaf and magnetic biochar composite were prepared for the adsorption of Cd2+. The synthesized biochar was characterized using (a vibrating-sample magnetometer VSM), Scanning electron microscopy (SEM), X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The adsorption batch study was carried out to investigate the influence of pH, kinetics, isotherm, and thermodynamics on Cd2+ adsorption. The characterization results demonstrated that the biochar contained iron particles that help in improving the textural properties (i.e., surface area and pore volume), increasing the number of oxygen-containing groups, and forming inner-sphere complexes with oxygen-containing groups. The adsorption study results show that optimum adsorption was achieved under pH 5–6. An increase in initial ion concentration and solution temperature resulted in increased adsorption capacity. Surface modification of biochar using iron oxide for imposing magnetic property allowed for easy separation by external magnet and regeneration. The magnetic biochar composite also showed a higher affinity to Cd2+ than the pristine biochar. The adsorption data fit well with the pseudo-second-order and the Langmuir isotherm, with the maximum adsorption capacity of 47.90 mg/g.

scholarly journals Adsorption isotherm and thermodynamic studies of As(III) removal from aqueous solutions using used cigarette filter ash

2019 ◽  
Vol 9 (8) ◽  
Author(s):  
Pezhman Zein Al-Salehin ◽  
Farid Moeinpour ◽  
Fatemeh S. Mohseni-Shahri
Keyword(s):  
Aqueous Solutions ◽  
Langmuir Isotherm ◽  
Adsorption Equilibrium ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Cigarette Filter ◽  
Electron Microscopy Analysis ◽  
Equilibrium Data ◽  
Thermodynamic Variables ◽  
Adsorption Equilibrium Data

Abstract In the present paper, used cigarette filter ash was prepared and used as an active adsorbent to remove As(III) ions from aqueous solutions. The prepared adsorbent structure was identified by scanning electron microscopy analysis, Brunauer–Emmett–Teller method and energy-dispersive X-ray spectroscopy analysis. The influence of contact time, pH, adsorbent dose and initial concentration of As(III) on the removal of As(III) was assessed. Several isotherm models were checked to illustrate the adsorption equilibrium. The adsorption equilibrium data adapted well with the Langmuir isotherm model. The maximum adsorption capacity of 33.33 mg/g was acquired from the Langmuir isotherm. The calculated thermodynamic variables verified that the adsorption process is spontaneous and endothermic.

scholarly journals Adsorptive removal of phosphate by a Fe–Mn–La tri-metal composite sorbent: Adsorption capacity, influence factors, and mechanism

2020 ◽  
Vol 38 (7-8) ◽  
pp. 254-270
Author(s):  
Yuanrong Zhu ◽  
Xianming Yue ◽  
Fazhi Xie
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Phosphate Removal ◽  
Maximum Adsorption Capacity ◽  
Hydroxyl Groups ◽  
Metal Composite ◽  
Order Kinetic ◽  
Composite Sorbent ◽  
Composite Adsorbent

Reducing input of phosphorus is the key step for control of eutrophication and algal blooming in freshwater lakes. Adsorption technology is a cost-effective technology for phosphate removal in water for the purpose. Thus, in this study, a novel Fe–Mn–La tri-metal composite sorbent was developed, and then evaluated for phosphate removal. The results showed that the maximum adsorption capacity could be approached to 61.80 mg g−1 at 25°C under pH of 6.03. Adsorption of phosphate by Fe–Mn–La tri-metal composite adsorbent fitted better by pseudo-second-order kinetic equation and Langmuir model, which suggested that the adsorption process was surface chemical reactions and mainly in a monolayer coverage manner. The thermodynamic study indicated that the adsorption reaction was an endothermic process. The phosphate removal gradually decreased with the increasing of pH from 3.02 to 11.00. The sequence of coexisting anions competing with phosphates was that CO32− > Cl− > SO42− > NO3−. Dissolved organic matter, fulvic acid as a representative, would also decrease adsorption capacities of phosphate by Fe–Mn–La tri-metal composite adsorbents. Adsorption capacity would be decreased with increasing addition of adsorbents, while removal efficiency would be increased in this process. The Fe–Mn–La tri-metal composite adsorbent showed a good reusability when applied to removal of dissolved phosphate from aqueous solutions. The Fourier transform infrared spectrometer and X-ray photoelectron spectroscopy analyses indicated that some hydroxyl groups (–OH) on the surface of adsorbent were replaced by the adsorbed PO43−, HPO42−, or H2PO4−. Aggregative results showed that the novel Fe–Mn–La tri-mental composite sorbent is a very promising adsorbent for the removal of phosphate from aqueous solutions.

Adsorption of Crystal Violet oNto Nitrogen-Doped Mesoporous Carbon

2017 ◽  
Vol 42 (3) ◽  
pp. 269-281
Author(s):  
Lvling Zhong ◽  
Liang Zhang ◽  
Hongliang Shi
Keyword(s):  
Adsorption Capacity ◽  
Crystal Violet ◽  
Photoelectron Spectroscopy ◽  
Control Process ◽  
Maximum Adsorption Capacity ◽  
Nitrogen Doped ◽  
First Order Kinetics ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Adsorption Desorption

A series of nitrogen-doped mesoporous carbons (NDMCs) was prepared using p-phenylenediamine and glyoxal as a carbon source and mesoporous silica as a hard template. N2 adsorption–desorption isotherms indicated that mesopores with a wider distribution exist in NDMCs. Elemental analysis showed that the N content on the surface of NDMC-800 was 9.9at.%, with a result close to 8.4at.% from X-ray photoelectron spectroscopy. The adsorption capacity of NDMCs for crystal violet (CV) in aqueous solution was investigated. Static equilibrium data were well described by the Langmuir isotherm model, with a maximum adsorption capacity of 243.9 mg g−1. Adsorption kinetics data suggested that the adsorption control process follows the pseudo first-order kinetics model. The results showed that this carbon material has the potential for application in adsorption of CV.

scholarly journals Preparation of GO/MIL-101(Fe,Cu) composite and its adsorption mechanisms for phosphate in aqueous solution

2021 ◽  
Author(s):  
You Wu ◽  
Zuannian Liu ◽  
Bakhtari Mohammad Fahim ◽  
Junnan Luo
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Adsorption Mechanism ◽  
Nitrogen Adsorption ◽  
Adsorption Properties ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adsorption Mechanisms ◽  
Adsorption Desorption

Abstract In this study, MIL-101(Fe), MIL-101(Fe,Cu), and Graphene Oxide (GO) /MIL-101(Fe,Cu) were synthesized to compose a novel sorbent. The adsorption properties of these three MOFs-based composites were compared toward the removal of phosphate. Furthermore, the influencing factors including reaction time, pH, temperature and initial concentration on the adsorption capacity of phosphate on these materials as well as the reusability of the material were discussed. The structure of fabricated materials and the removal mechanism of phosphate on the composite material were analyzed by Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption analysis and zeta potential. The results show that the maximum adsorption capacity of phosphate by the composite GO/MIL-101(Fe,Cu)-2% was 204.60 mg·g− 1, which is higher than that of MIL-101(Fe,Cu) and MIL-101(Fe). likewise the specific surface area of GO/MIL-101(Fe,Cu)-2% is 778.11 m2/g is higher than that of MIL-101(Fe,Cu) and MIL-101(Fe),which are 747.75 and 510.66m2/g respectively. The adsorption mechanism of phosphate is electrostatic attraction, form coordination bonds and hydrogen bonds. The fabricated material is a promising adsorbent for the removal of phosphate with good reusability.

Synthesis of magnetic biochar derived from cotton stalks for the removal of Cr(VI) from aqueous solution

2019 ◽  
Vol 79 (11) ◽  
pp. 2106-2115 ◽  
Author(s):  
Fengfeng Ma ◽  
Baowei Zhao ◽  
Jingru Diao
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Cotton Stalk ◽  
Magnetic Biochar ◽  
X Ray ◽  
Cotton Stalks ◽  
Pseudo Second Order ◽  
Co Precipitation

Abstract A magnetic cotton stalk biochar (MCSBC) was synthesized through chemical co-precipitation, based on cotton stalk biochar (CSBC). The MCSBC and CSBC were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and vibrating sample magnetometry. The characterization analyses showed that the magnetization process endowed the CSBC with excellent magnetic properties with a superparamagnetic magnetization of 27.59 emu/g. Batch adsorption experiment results indicated that the Cr(VI) maximum adsorption capacity of MCSBC was 20.05 mg/g, which was higher than that of CSBC (18.77 mg/g). The adsorption kinetic data were well fitted by the pseudo-second-order model and the adsorption isotherms were well represented by the Sips isotherm model. The thermodynamic studies indicated that the adsorption process was spontaneous and endothermic, and the entropy increased. The potential adsorption mechanism was the electrostatic adsorption of anionic Cr(VI) to the positively charged MCSBC surface, the reduction of Cr(VI) into Cr(III) and the complexation of Cr(III) by oxygen-containing functional groups of MCSBC. The regeneration studies showed that MCSBC kept 80% of its initial Cr(VI) adsorption capacity in the cycle. All the findings suggest that this novel magnetic biochar could be used in the field of Cr(VI)-containing wastewater treatment.

Carboxylated carbon nanotubes-graphene oxide aerogels as ultralight and renewable high performance adsorbents for efficient adsorption of glyphosate

2020 ◽  
Vol 17 (1) ◽  
pp. 6 ◽  
Author(s):  
Hao Liu ◽  
Xueying Wang ◽  
Chaofan Ding ◽  
Yuxue Dai ◽  
Yuanling Sun ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Langmuir Isotherm ◽  
Adsorption Process ◽  
Organophosphorus Pesticide ◽  
Isotherm Model ◽  
Langmuir Isotherm Model ◽  
Graphene Oxide Aerogel ◽  
Carboxylated Carbon Nanotubes

Environmental contextGlyphosate is a highly effective and widely used organophosphorus pesticide, but its residues can harm the environment and human health. We report a carboxylated carbon nanotubes-graphene oxide aerogel that can efficiently remove glyphosate from water. This technology has great application prospects in dealing with water contaminated with glyphosate. AbstractGlyphosate, an organophosphorus pesticide, has received considerable attention in recent years owing to its carcinogenic potency. The technologies that remove glyphosate in the environment, especially in water, are important. In this work, we prepare a carboxylated carbon nanotubes-graphene oxide aerogel (cCNTs-GA) by the freeze-drying method for the adsorption of glyphosate. The prepared aerogel exhibits an ultra-low density (7.30mgcm−3), good morphology and strong mechanical strength. Meanwhile, a NaOH solution (0.5molL−1) is selected as an eluent and the adsorption parameters for the adsorption of glyphosate are optimised. The properties of the adsorbents after multiple repetitions and the adsorption mechanism of the cCNTs-GA are also studied. The results show that the adsorbent can be recycled more than 20 times and maintains a good adsorption performance. The maximum adsorption capacity of glyphosate at pH 3 is calculated from the Langmuir isotherm model (546mgg−1 at the temperature of 298K), and the cCNTs-GA exhibits a high adsorption affinity and adsorption capacity for glyphosate, as determined by the partition coefficient (PC). The pseudo-second-order kinetic model fits well to the dynamic behaviour. The equilibrium adsorption process follows the Langmuir isotherm model and the adsorption process is mainly controlled by the intraparticle diffusion model. Furthermore, thermodynamic analysis indicates that the adsorption of glyphosate on the cCNTs-GA is exothermic and spontaneous. The adsorbent is used to remove glyphosate from waste water and the adsorption capacity of the cCNTs-GA for glyphosate is higher than other adsorbents, which indicates that the developed adsorbent has a great potential application in environmental pollution treatment.

Sign in / Sign up

Export Citation Format

Share Document