scholarly journals Structural and optical properties of Nd:YAB-nanoparticle-doped PDMS elastomers for random lasers

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Antsar R. Hlil ◽  
Jyothis Thomas ◽  
Yalina Garcia-Puente ◽  
Jean-Sebastien Boisvert ◽  
Bismarck C. Lima ◽  
...  
Keyword(s):  
Optical Properties ◽  
Optical Gain ◽  
Systematic Investigation ◽  
Lasing Spectrum ◽  
Structural And Optical Properties ◽  
Lasing Wavelength ◽  
Pdms Elastomer ◽  
Wide Range ◽  
Elastomer Composites ◽  
Mechanical Stretching

AbstractWe report the structural and optical properties of Nd:YAB (NdxY1−x Al3(BO3)4)-nanoparticle-doped PDMS elastomer films for random lasing (RL) applications. Nanoparticles with Nd ratios of x = 0.2, 0.4, 0.6, 0.8, and 1.0 were prepared and then incorporated into the PDMS elastomer to control the optical gain density and scattering center content over a wide range. The morphology and thermal stability of the elastomer composites were studied. A systematic investigation of the lasing wavelength, threshold, and linewidth of the laser was carried out by tailoring the concentration and optical gain of the scattering centers. The minimum threshold and linewidth were found to be 0.13 mJ and 0.8 nm for x = 1 and 0.8. Furthermore, we demonstrated that the RL intensity was easily tuned by controlling the degree of mechanical stretching, with strain reaching up to 300%. A strong, repeatable lasing spectrum over ~ 50 cycles of applied strain was observed, which demonstrates the high reproducibility and robustness of the RL. In consideration for biomedical applications that require long-term RL stability, we studied the intensity fluctuation of the RL emission, and confirmed that it followed Lévy-like statistics. Our work highlights the importance of using rare-earth doped nanoparticles with polymers for RL applications.

scholarly journals Structural and Optical Properties of Nd:YAB-nanoparticle-doped PDMS Elastomers for Random Lasers

2021 ◽  
Author(s):  
Antsar R. Hlil ◽  
Jyothis Thomas ◽  
Yalina Garcia-Puente ◽  
Jean-sebastien Boisvert ◽  
Bismarck C. Lima ◽  
...  
Keyword(s):  
Optical Properties ◽  
Optical Gain ◽  
Systematic Investigation ◽  
Lasing Spectrum ◽  
Structural And Optical Properties ◽  
Lasing Wavelength ◽  
Pdms Elastomer ◽  
Wide Range ◽  
Elastomer Composites ◽  
Mechanical Stretching

Abstract We report the structural and optical properties of Nd:YAB (NdxY1−x Al3(BO3)4)-nanoparticle-doped PDMS elastomer films for random lasing (RL) applications. Nanoparticles with Nd ratios of x = 0.2, 0.4, 0.6, 0.8, and 1.0 were prepared and then incorporated into the PDMS elastomer to control the optical gain density and scattering center content over a wide range. The morphology and thermal stability of the elastomer composites were studied. A systematic investigation of the lasing wavelength, threshold, and linewidth of the laser was carried out by tailoring the concentration and optical gain of the scattering centers. The minimum threshold and linewidth were found to be 0.13 mJ and 0.8 nm for x = 1 and 0.8. Furthermore, we demonstrated that the RL intensity was easily tuned by controlling the degree of mechanical stretching, with strain reaching up to 300%. A strong, repeatable lasing spectrum over ~ 50 cycles of applied strain was observed, which demonstrates the high reproducibility and robustness of the RL. In consideration for biomedical applications that require long-term RL stability, we studied the intensity fluctuation of the RL emission, and confirmed that it followed Lévy-like statistics. Our work highlights the importance of using rare-earth doped nanoparticles with polymers for RL applications.

Optical Properties of HVEM Accelerators

1975 ◽  
Vol 33 ◽  
pp. 180-181
Author(s):  
A. Strojnik ◽  
J.W. Scholl ◽  
V. Bevc
Keyword(s):  
Optical Properties ◽  
Electron Accelerator ◽  
Systematic Investigation ◽  
Electron Source ◽  
High Brightness ◽  
The Past ◽  
Wide Range ◽  
Optical Behavior

The electron accelerator, as inserted between the electron source (injector) and the imaging column of the HVEM, is usually a strong lens and should be optimized in order to ensure high brightness over a wide range of accelerating voltages and illuminating conditions. This is especially true in the case of the STEM where the brightness directly determines the highest resolution attainable. In the past, the optical behavior of accelerators was usually determined for a particular configuration. During the development of the accelerator for the Arizona 1 MEV STEM, systematic investigation was made of the major optical properties for a variety of electrode configurations, number of stages N, accelerating voltages, 1 and 10 MEV, and a range of injection voltages ϕ0 = 1, 3, 10, 30, 100, 300 kV).

Influences of Stirring Speed and Post Annealing Temperature on the Properties of Zinc Oxide Colloid Prepared by Sol-Gel Spin Coating Method

2016 ◽  
Vol 701 ◽  
pp. 159-163 ◽  
Author(s):  
Sheen Jeff Teh ◽  
Yew Keong Sin ◽  
Kah Yoong Chan ◽  
Nisha Kumari Devaraj
Keyword(s):  
Zinc Oxide ◽  
Optical Properties ◽  
Spin Coating ◽  
Annealing Temperature ◽  
Low Cost ◽  
Sol Gel ◽  
Structural And Optical Properties ◽  
Post Annealing ◽  
Wide Range ◽  
Post Annealing Temperature

Zinc oxide (ZnO) colloid has drawn significant attention recently due to its wide range of potential applications such as photonic crystals, solar cells, sensors, and other optical devices. In this work, low cost sol-gel spin coating technique was employed to synthesis ZnO colloid. The influences of stirring speed and post annealing temperature on the properties of ZnO colloid was investigated. The structural and optical properties of ZnO colloid was characterized using field-emission scanning electron microscopy (FESEM) and ultraviolet-visible (UV-Vis) spectrophotometer, respectively. Subsequently, Tauc method was used to estimate the optical band gap of the ZnO colloid based on the optical transmittance data. The effects of the stirring speed and post annealing temperature on the structural and optical properties of ZnO colloid are revealed and discussed in this paper. It was found that ZnO colloid prepared by the stirring speed of 500rpm and 400°C post annealing temperature demonstrates the best dispersity quality of colloid system.

Structural and Optical Properties of Cu2ZnSn(SxSe1–x)4 Thin Films

2018 ◽  
Vol 23 (3) ◽  
pp. 230-239
Author(s):  
E.P. Zaretskaya ◽  
◽  
V.F. Gremenok ◽  
A.V. Stanchik ◽  
A.N. Pyatlitski ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Structural And Optical Properties

Structural and optical properties of Tin Oxide and Indium doped SnO2 thin films deposited by thermal evaporation technique

2016 ◽  
Vol 12 (3) ◽  
pp. 4394-4399
Author(s):  
Sura Ali Noaman ◽  
Rashid Owaid Kadhim ◽  
Saleem Azara Hussain
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Tin Oxide ◽  
Thermal Evaporation ◽  
Pure Sno2 ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Evaporation Technique ◽  
Sno2 Thin Films

Tin Oxide and Indium doped Tin Oxide (SnO2:In) thin films were deposited on glass and Silicon  substrates  by  thermal evaporation technique.  X-ray diffraction pattern of  pure SnO2 and SnO2:In thin films annealed at 650oC and the results showed  that the structure have tetragonal phase with preferred orientation in (110) plane. AFM studies showed an inhibition of grain growth with increase in indium concentration. SEM studies of pure  SnO2 and  Indium doped tin oxide (SnO2:In) ) thin films showed that the films with regular distribution of particles and they have spherical shape.  Optical properties such as  Transmission , optical band-gap have been measured and calculated.

Ab initio calculation on the Optical Properties of AA- Stacked two dimensional Graphene, Silicene, Germanene, and Stanene

2018 ◽  
Vol 1 (1) ◽  
pp. 46-50
Author(s):  
Rita John ◽  
Benita Merlin
Keyword(s):  
Optical Properties ◽  
Band Structure ◽  
Density Functional ◽  
Electronic Band Structure ◽  
Complex Refractive Index ◽  
Single Layer ◽  
Generalized Gradient ◽  
Electronic Band ◽  
Wide Range ◽  
Optical Region

In this study, we have analyzed the electronic band structure and optical properties of AA-stacked bilayer graphene and its 2D analogues and compared the results with single layers. The calculations have been done using Density Functional Theory with Generalized Gradient Approximation as exchange correlation potential as in CASTEP. The study on electronic band structure shows the splitting of valence and conduction bands. A band gap of 0.342eV in graphene and an infinitesimally small gap in other 2D materials are generated. Similar to a single layer, AA-stacked bilayer materials also exhibit excellent optical properties throughout the optical region from infrared to ultraviolet. Optical properties are studied along both parallel (||) and perpendicular ( ) polarization directions. The complex dielectric function (ε) and the complex refractive index (N) are calculated. The calculated values of ε and N enable us to analyze optical absorption, reflectivity, conductivity, and the electron loss function. Inferences from the study of optical properties are presented. In general the optical properties are found to be enhanced compared to its corresponding single layer. The further study brings out greater inferences towards their direct application in the optical industry through a wide range of the optical spectrum.

Sign in / Sign up

Export Citation Format

Share Document