A highly conductive porous graphene electrode prepared via in situ reduction of graphene oxide using Cu nanoparticles for the fabrication of high performance supercapacitors

RSC Advances ◽  
2015 ◽  
Vol 5 (67) ◽  
pp. 54275-54282 ◽  
Author(s):  
Jizhen Zhang ◽  
Yuanhong Xu ◽  
Zhen Liu ◽  
Wenrong Yang ◽  
Jingquan Liu
Keyword(s):  
Graphene Oxide ◽  
High Performance ◽  
In Situ Reduction ◽  
Cu Nanoparticles ◽  
Porous Graphene ◽  
Graphene Electrode ◽  
Cu Nanoparticle ◽  
Electrodes For Supercapacitors

A new graphene/Cu nanoparticle composite was prepared via the in situ reduction of GO in the presence of Cu nanoparticles which was then utilized as a sacrificing template for the formation of graphene electrodes for supercapacitors.

Embedding SiO2into graphene oxide in situ to generate 3D hierarchical porous graphene laminates for high performance lithium–sulfur batteries

RSC Advances ◽  
2015 ◽  
Vol 5 (98) ◽  
pp. 80353-80356 ◽  
Author(s):  
Wangliang Wu ◽  
Chunying Wan ◽  
Chuxin Wu ◽  
Lunhui Guan
Keyword(s):  
Graphene Oxide ◽  
Self Assembly ◽  
High Performance ◽  
Reversible Capacity ◽  
Cycling Performance ◽  
Functionalized Graphene Oxide ◽  
Porous Graphene ◽  
Hierarchical Porous ◽  
Lithium Sulfur Batteries

3D hierarchical porous graphene laminates through self-assembly of functionalized graphene oxide embedded with SiO2in situas a carbon host material for sulfur cathode, exhibits high reversible capacity, stable cycling performance as well as excellent rate capabilities.

Hierarchically porous graphene/wood-derived carbon activated with ZnCl2 and decorated with in situ grown NiCo2O4 for high‒performance asymmetric supercapacitors

2021 ◽  
Author(s):  
Mei-Jiao Zeng ◽  
Xiaofeng Li ◽  
Shumeng Hao ◽  
Jin Qu ◽  
Wei Li ◽  
...  
Keyword(s):  
High Performance ◽  
Asymmetric Supercapacitors ◽  
Environmental Friendliness ◽  
Hierarchically Porous ◽  
Porous Graphene ◽  
Porous Architecture ◽  
Electrodes For Supercapacitors

Although wood-derived carbon (WC) and its derivatives are promising electrodes for supercapacitors because of their hierarchically porous architecture, superior mechanical flexibility, and environmental friendliness, pure WC electrodes usually exhibit poor...

Physicochemical properties of geopolymer composites with DFT calculations of in-situ reduction of graphene oxide

2021 ◽  
Author(s):  
Amun Amri ◽  
Ahmad Ainun Najib ◽  
Monita Olivia ◽  
Mohammednoor Altarawneh ◽  
Aman Syam ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Dft Calculations ◽  
Physicochemical Properties ◽  
In Situ Reduction ◽  
Geopolymer Composites

scholarly journals Hierarchical Porous RGO/PEDOT/PANI Hybrid for Planar/Linear Supercapacitor with Outstanding Flexibility and Stability

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Fuwei Liu ◽  
Luoyuan Xie ◽  
Li Wang ◽  
Wei Chen ◽  
Wei Wei ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Energy Density ◽  
Structural Design ◽  
High Performance ◽  
Rate Capability ◽  
Cotton Yarn ◽  
Reduced Graphene ◽  
Hierarchical Porous ◽  
Good Rate Capability ◽  
Electrodes For Supercapacitors

AbstractMany hybrid electrodes for supercapacitors (SCs) are a reckless combination without proper structural design that keeps them from fulfilling their potential. Herein, we design a reduced graphene oxide/poly(3,4-ethylenedioxythiophene)/polyaniline (RGO/PEDOT/PANI) hybrid with hierarchical and porous structure for high-performance SCs, where components fully harness their advantages, forming an interconnected and conductive framework with substantial reactive sites.Thus, this hybrid achieves a high capacitance of 535 F g−1 along with good rate capability and cyclability. The planar SC based on this hybrid deliver an energy density of 26.89 Wh kg−1 at a power density of 800 W kg−1. The linear SC developed via modifying a cotton yarn with the hybrid exhibits good flexibility and structural stability, which operates normally after arbitrary deformations. This work provides a beneficial reference for developing SCs.

Engineering of porous graphene oxide membranes for solar steam generation with improved efficiency

2022 ◽  
Author(s):  
Chao Xu ◽  
Haibo Li
Keyword(s):  
Graphene Oxide ◽  
High Performance ◽  
Potable Water ◽  
Steam Generation ◽  
Porous Graphene ◽  
Highly Efficient ◽  
Environmental Friendly ◽  
Solar Steam Generation ◽  
Oxide Membranes ◽  
Graphene Oxide Membranes

Interfacial solar steam generation (ISSG) is considered to be a highly efficient and environmental-friendly desalination technique for producing potable water. Herein, we demonstrate the high-performance SSG enabled by the porous...

In situ synthesis of V 2 O 3 nanorods anchored on reduced graphene oxide as high‐performance lithium ion battery anode

2018 ◽  
Vol 3 (43) ◽  
pp. 12108-12112 ◽  
Author(s):  
Xiaoqing Liu ◽  
Dan Zhang ◽  
Guangshe Li ◽  
Chenglin Xue ◽  
Junfang Ding ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Lithium Ion Battery ◽  
Reduced Graphene Oxide ◽  
High Performance ◽  
Lithium Ion ◽  
In Situ Synthesis ◽  
Reduced Graphene ◽  
Battery Anode

scholarly journals Graphene Oxide-Embedded Extracellular Matrix- Derived Hydrogel as a Multiresponsive Platform for 3D Bioprinting Applications

2021 ◽  
Vol 7 (3) ◽  
Author(s):  
Laura Rueda-Gensini ◽  
Julian A Serna ◽  
Javier Cifuentes ◽  
Juan C Cruz ◽  
Carolina Muñoz-Camargo
Keyword(s):  
Graphene Oxide ◽  
Mechanical Stability ◽  
Light Exposure ◽  
Structural Characteristics ◽  
Elastic Response ◽  
Cellular Interaction ◽  
3D Bioprinting ◽  
In Situ Reduction ◽  
Crosslinking Degree

Decellularized extracellular matrices (dECMs) have shown enormous potential for the biofabrication of tissues due to their biomimetic properties that promote enhanced cellular interaction and tissue regeneration. However, biofabrication schemes requiring electrostimulation pose an additional constraint due to the insulating properties of natural materials. Here, we propose a methacryloyl-modified decellularized small intestine submucosa (SISMA) hydrogel, embedded with graphene oxide (GO) nanosheets, for extrusion-based 3D bioprinting applications that require electrostimulation. Methacryloyl biochemicalmodification is performed to enhance the mechanical stability of dECM constructs by mediating photo-crosslinking reactions, and a multistep fabrication scheme is proposed to harness the bioactive and hydrophilic properties of GO and electroconductive properties of reduced GO. For this, GO was initially dispersed in SISMA hydrogels by exploiting its hydrophilicity and protein adsorption capabilities, and in situ reduction was subsequently performed to confer electroconductive abilities. SISMA-GO composite hydrogels were successfully prepared with enhanced structural characteristics, as shown by the higher crosslinking degree and increased elastic response upon blue-light exposure. Moreover, GO was homogeneously dispersed without affecting photocrosslinking reactions and hydrogel shear-thinning properties. Human adipose-derived mesenchymal stem cells were successfully bioprinted in SISMA-GO with high cell viability after 1 week and in situ reduction of GO during this period enhanced the electrical conductivity of these nanostructures. This work demonstrates the potential of SISMA-GO bioinks as bioactive and electroconductive scaffolds for electrostimulation applications in tissue engineering and regenerative medicine.

Sign in / Sign up

Export Citation Format

Share Document