A solution-processed n-doped fullerene cathode interfacial layer for efficient and stable large-area perovskite solar cells

2016 ◽  
Vol 4 (2) ◽  
pp. 640-648 ◽  
Author(s):  
Chih-Yu Chang ◽  
Wen-Kuan Huang ◽  
Yu-Chia Chang ◽  
Kuan-Ting Lee ◽  
Chin-Ti Chen
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Interfacial Layer ◽  
Cetyltrimethylammonium Bromide ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
Large Area ◽  
Solution Processed ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

A facile and effective approach to enhance the performance and stability of perovskite solar cells is proposed by using a solution-processed cetyltrimethylammonium bromide (CTAB)-doped [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) film as a cathode interfacial layer.

Morphology fixing agent for [6,6]-phenyl C61-butyric acid methyl ester (PC60BM) in planar-type perovskite solar cells for enhanced stability

RSC Advances ◽  
2016 ◽  
Vol 6 (57) ◽  
pp. 51513-51519 ◽  
Author(s):  
Sunyong Ahn ◽  
Woongsik Jang ◽  
Jong Hyeok Park ◽  
Dong Hwan Wang
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Titanium Oxide ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Device Operation ◽  
Enhanced Stability

Enhanced stability of planar-type perovskite solar cells (PSCs) has been demonstrated by applying titanium oxide (TiOx) interlayer which acts as a morphological fixing agent for preseving delamication of PC60BM with long-term device operation.

A mono(carboxy)porphyrin-triazine-(bodipy)2triad as a donor for bulk heterojunction organic solar cells

2015 ◽  
Vol 3 (24) ◽  
pp. 6209-6217 ◽  
Author(s):  
Ganesh D. Sharma ◽  
S. A. Siddiqui ◽  
Agapi Nikiforou ◽  
Galateia E. Zervaki ◽  
Irene Georgakaki ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Bulk Heterojunction ◽  
Acid Methyl Ester ◽  
Solution Processed ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

A mono(carboxy)porphyrin-triazine-(bodipy)2triad(PorCOOH)(BDP)2has been used as a donor with ([6,6]-phenyl C71butyric acid methyl ester) (PC71BM) as an acceptor, in BHJ - solution processed organic solar cells.

Effects of the pyromellitic dianhydride cathode interfacial layer on characteristics of organic solar cells based on poly(3-hexylthiophene-2,5-diyl) and [6,6]-phenyl C61 butyric acid methyl ester

2010 ◽  
Vol 25 (5) ◽  
pp. 866-870 ◽  
Author(s):  
Eunkyoung Nam ◽  
Mi Ran Moon ◽  
Jungwoo Kim ◽  
Donggeun Jung ◽  
Hyoungsub Kim ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Interfacial Layer ◽  
Power Conversion ◽  
Acid Methyl Ester ◽  
Pyromellitic Dianhydride ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

This study examined the performance of poly(3-hexylthiophene-2,5-diyl)(P3HT)- and [6,6]-phenyl C61 butyric acid methyl ester (PCBM)-based organic solar cells (OSCs) with a pyromellitic dianhydride (PMDA) cathode interfacial layer between the active layer and cathode. The effect of inserting the cathode interfacial layer with different thicknesses was investigated. For the OSC samples with a 0.5 nm thick PMDA layer, the power conversion efficiency (PCE) was approximately 2.77% under 100 mW/cm2 (AM1.5) simulated illumination. It was suggested that the PMDA cathode interfacial layer acts as an exciton blocking layer, leading to an enhancement of the OSC performance.

scholarly journals Phenyl-C61-Butyric Acid Methyl Ester Hybrid Solution for Efficient CH3NH3PbI3 Perovskite Solar Cells

2019 ◽  
Vol 11 (14) ◽  
pp. 3867
Author(s):  
MiJoung Kim ◽  
MoonHoe Kim ◽  
JungSeock Oh ◽  
NamHee Kwon ◽  
Yoonmook Kang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
Absorber Layer ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Organic–inorganic halide perovskite solar cells (PSCs) have excellent chemical, electronic, and optical properties, making them attractive next-generation thin-film solar cells. Typical PSCs were fabricated with a perovskite absorber layer between the TiO2 electron-transport layer (ETL) and the 2,2′,7,7′-tetrakis-(N,N-di-4-methoxyphenylamino)-9,9′-spirobifluorene (Spiro-OMeTAD) hole-transport layer (HTL). We examined the influence of phenyl-C61-butyric acid methyl ester (PCBM) on the PSC device. PSCs using the PCBM layer as an ETL were investigated, and the absorber layer was coated by dissolving PCBM in a methyl ammonium lead iodide (MAPbI3) precursor solution to examine the changes at the perovskite interface and inside the perovskite absorber layer. The PSCs fabricated by adding a small amount of PCBM to the MAPbI3 solution exhibited a significantly higher maximum efficiency of 16.55% than conventional PSCs (14.34%). Fabricating the PCBM ETL and PCBM-MAPbI3 hybrid solid is expected to be an efficient route for improving the photovoltaic performance.

Elucidating the mechanisms underlying PCBM enhancement of CH3NH3PbI3 perovskite solar cells using GIXRD and XAFS

2020 ◽  
Vol 8 (6) ◽  
pp. 3145-3153 ◽  
Author(s):  
Bing Liu ◽  
Rongli Cui ◽  
Huan Huang ◽  
Xihong Guo ◽  
Jinquan Dong ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Active Layer ◽  
Butyric Acid ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
The Stability

In this study, the stability mechanism of the optimized methyl ammonium lead triiodide (CH3NH3PbI3, MAPbI3)/[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) perovskite active layer upon exposure to moisture, light, and heating was investigated.

One-dimensional (1D) [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) nanorods as an efficient additive for improving the efficiency and stability of perovskite solar cells

2016 ◽  
Vol 4 (22) ◽  
pp. 8566-8572 ◽  
Author(s):  
Chenxin Ran ◽  
Yonghua Chen ◽  
Weiyin Gao ◽  
Minqiang Wang ◽  
Liming Dai
Keyword(s):  
Grain Size ◽  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
One Dimensional ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

We report a novel 1DPCBM nanorod material as an efficient additive to form a wrinkle-like bicontinuousperovskite layer, where 1D PCBM nanorods can distribute homogenously throughout the film with an enlarged grain size.

Blend composition study of poly(3,3‴-didodecylquaterthiophene)/[6,6]-phenyl C61 butyric acid methyl ester solution processed organic solar cells

2009 ◽  
Vol 105 (1) ◽  
pp. 016105 ◽  
Author(s):  
Avery P. Yuen ◽  
John S. Preston ◽  
Ah-Mee Hor ◽  
Richard Klenkler ◽  
Erees Queen B. Macabebe ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Acid Methyl Ester ◽  
Solution Processed ◽  
Blend Composition ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Composition Study
Sign in / Sign up

Export Citation Format

Share Document