scholarly journals Vermicomposting of coal fly ash using epigeic and epi-endogeic earthworm species: nutrient dynamics and metal remediation

RSC Advances ◽  
2017 ◽  
Vol 7 (9) ◽  
pp. 4876-4890 ◽  
Author(s):  
Zeba Usmani ◽  
Vipin Kumar ◽  
Sujeet Kumar Mritunjay

Study highlights the metal removal efficiency and nutrient dynamics of three potent earthworm species from coal fly ash with a comparative aspect.

2009 ◽  
Vol 42 (1) ◽  
pp. 63-68 ◽  
Author(s):  
Isa A.M. Yunusa ◽  
Michael Braun ◽  
Roy Lawrie

1996 ◽  
Vol 13 (6) ◽  
pp. 527-536 ◽  
Author(s):  
L.J. Alemany ◽  
M.C. Jiménez ◽  
M.A. Larrubia ◽  
F. Delgado ◽  
J.M. Blasco

The present work examines the possible use of fly ash, a byproduct of coal power stations, as a means of removing phenol from water, or equivalently, of restricting its movement in solid wastes or soil. Equilibrium experiments were performed to evaluate the removal efficiency of fly ash. The adsorption experiments were undertaken using fly ash treated at three different pH levels and with three different temperatures. The results indicate that although phenol can be removed from water, this depends markedly on the temperature and pH value of the treatment solution employed.


2013 ◽  
Vol 51 (37-39) ◽  
pp. 7181-7193 ◽  
Author(s):  
Julide Hizal ◽  
Esma Tutem ◽  
Kubilay Guclu ◽  
Mehmet Hugul ◽  
Sertac Ayhan ◽  
...  

2000 ◽  
Vol 17 (3) ◽  
pp. 325-331 ◽  
Author(s):  
Min-Gyu Lee ◽  
Gyeongbeom Yi ◽  
Byoung-Joon Ahn ◽  
Felicity Roddick

RSC Advances ◽  
2021 ◽  
Vol 11 (33) ◽  
pp. 20292-20302
Author(s):  
Nga Thi Dinh ◽  
Linh Ngoc Hoang Vo ◽  
Ngoc Thi Thanh Tran ◽  
Tuan Dinh Phan ◽  
Duc Ba Nguyen

High efficiency of methylene blue adsorbent from waste coal fly ash by treatment with alkaline thermal hydrolysis.


RSC Advances ◽  
2018 ◽  
Vol 8 (16) ◽  
pp. 8805-8812 ◽  
Author(s):  
Pengfei Wu ◽  
Yuanyuan Tang ◽  
Zongwei Cai

Coal fly ash is usually used as a cost-effective adsorbent for heavy metal removal, accumulating large amounts of spent coal fly ash that requires further disposal.


RSC Advances ◽  
2016 ◽  
Vol 6 (96) ◽  
pp. 93564-93574 ◽  
Author(s):  
Miaomiao Zhang ◽  
Yanpeng Mao ◽  
Wenlong Wang ◽  
Shanxiu Yang ◽  
Zhanlong Song ◽  
...  

The removal efficiency for malachite green using CFA/CFO as adsorbent is significantly improved.


2021 ◽  
Vol 5 (1) ◽  
pp. 24-35
Author(s):  
Komala Affiyanti Affandi ◽  
Arseto Yekti Bagastyo

The main composition and availability of fly ash cause this waste which has potential as an adsorbent to remove ammonium and phosphate in water. Difference of main composition will cause different removal efficiency. The purposes from this research are to determine optimal condition for removing concentration ammonium and phosphate and to determine the source of fly ash which has great potential for ammonium and phosphate removal in solution. The optimal conditions were carried out by varying pH of solution and adsorbent dosages to remove ammonium and phosphate concentrations in different initial concentrations. Optimum pH of solution in this research is 8 with range of ammonium removal efficiency 8% to 14% and 16% to 75% for removing phosphate which has condition ammonium concentration higher than phosphate. Ammonium concentration lower than phosphate will have a negative effect on the removal. Adsorbent dosage of 4.5 g is able to produce optimal removal efficiency both ammonium and phosphate. From five different sources of fly ash, Punagaya fly ash has the great potential for removal ammonium and phosphate simultaneously which has an adsorption capacity of 7.17 mg/g and 19.50 mg/g for ammonium and phosphate respectively.


2018 ◽  
Vol 85 (3) ◽  
pp. 375-378
Author(s):  
Fei Gao ◽  
Liwen Xiao ◽  
Hongzhou Zhang

The studies described in the Research Communication aimed to describe the feasibility of using coal fly ash to synthesize nano-zeolite, and the ammonium and phosphate adsorption efficiencies of the nanomaterial in dairy wastewater. Chemical treatment of coal fly ash was conducted and changes observed. Samples treated with NaOH had an increased cation exchange capacity and P sorption index compared to the initial fly ash, due to particle modification from smooth surface to plate- and rod-shape crystals, referred to as nano-zeolite. Batch experiments were conducted by mixing coal fly ash and nano-zeolite with synthesized wastewater to study the effect of sorption time, pH values and dosage of nano-zeolite on ammonium and phosphate removal efficiency. The adsorption process reached equilibrium in a very short time (less than 60 min), which suggests a potential for fast immobilization of pollutants. The concentration of ammonium decreased from 118 to 35 mg/l (71% removal) while the concentration of phosphate decreased from 52 to 45 mg/l. The removal efficiency of ammonium was 36·6, 51·8 and 70·9% at pH 3, 7 and 10, respectively whilst that of phosphate increased dramatically with decreased slurry pH (92·1, 47·3 and 12·3% at pH 3, 7 and 10, respectively). Nano-zeolite could be a potential absorbent for fast immobilization of ammonium but not phosphate. Surface modification of nano-zeolite could be introduced in order to enhance the pollutants removal efficiency.


2016 ◽  
Vol 73 (8) ◽  
pp. 1954-1962 ◽  
Author(s):  
Kaihua Zhang ◽  
Dongxue Zhang ◽  
Kai Zhang

A novel effective adsorbent of alumina/silica oxide hydrate (ASOH) for arsenic removal was developed through simple chemical reactions using coal fly ash. The iron-modified ASOH with enhancing adsorption activity was further developed from raw fly ash based on the in situ technique. The adsorbents were characterized by X-ray diffraction, Fourier transform infrared spectrometry, scanning electron micrograph, laser particle size and Brunauer–Emmet–Teller surface area. The results show that the adsorbents are in amorphous and porous structure, the surface areas of which are 8–12 times that of the raw ash. The acidic hydrothermal treatment acts an important role in the formation of the amorphous structure of ASOH rather than zeolite crystal. A series of adsorption experiments for arsenic on them were studied. ASOH can achieve a high removal efficiency for arsenic of 96.4% from water, which is more than 2.5 times that of the raw ash. Iron-modified ASOH can enhance the removal efficiency to reach 99.8% due to the in situ loading of iron (Fe). The condition of synthesis pH = 2–4 is better for iron-modified ASOH to adsorb arsenic from water.


Sign in / Sign up

Export Citation Format

Share Document