scholarly journals The interface degradation of planar organic–inorganic perovskite solar cell traced by light beam induced current (LBIC)

RSC Advances ◽  
2017 ◽  
Vol 7 (68) ◽  
pp. 42973-42978 ◽  
Author(s):  
Yanqing Yao ◽  
Gang Wang ◽  
Fei Wu ◽  
Debei Liu ◽  
Chunyan Lin ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Light Beam ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Induced Current ◽  
Inorganic Hybrid ◽  
Inorganic Perovskite ◽  
Hybrid Perovskite

The light beam induced current (LBIC) method was adopted to nondestructively map the photoresponse of real planar organic–inorganic hybrid perovskite solar cells (PSCs).

scholarly journals Numerical Modeling and Optimization of Lead-Free Hybrid Double Perovskite Solar Cell by Using SCAPS-1D

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Syed Sajjad Hussain ◽  
Saira Riaz ◽  
Ghazi Aman Nowsherwan ◽  
Khizer Jahangir ◽  
Akram Raza ◽  
...  
Keyword(s):  
Solar Cell ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Double Perovskite ◽  
Perovskite Solar Cell ◽  
Lead Free ◽  
Inorganic Perovskite ◽  
Hybrid Perovskite

The highest power conversion efficiency (PCE) for organic-inorganic perovskite solar cells based on lead is reported as 25.2% in 2019. Lead-based hybrid perovskite materials are used in several photovoltaics applications, but these are not highly favored due to the toxicity of lead and volatility of organic cations. On the other hand, hybrid lead-free double perovskite has no such harm. In this research study, SCAPS numerical simulation is utilized to evaluate and compare the results of perovskite solar cell based on double perovskite FA 2 BiCuI 6 and standard perovskite CH 3 NH 3 PbI 3 as an active layer. The results show that the power conversion efficiency obtained in the case of FA 2 BiCuI 6 is 24.98%, while in the case of CH 3 NH 3 PbI 3 , it is reported as 26.42%. This indicates that the hybrid organic-inorganic double perovskite FA 2 BiCuI 6 has the ability to replace hybrid organic-inorganic perovskite CH 3 NH 3 PbI 3 to expand next-generation lead-free harmless materials for solar cell applications.

An in situ cross-linked 1D/3D perovskite heterostructure improves the stability of hybrid perovskite solar cells for over 3000 h operation

2020 ◽  
Vol 13 (11) ◽  
pp. 4344-4352
Author(s):  
Ning Yang ◽  
Cheng Zhu ◽  
Yihua Chen ◽  
Huachao Zai ◽  
Chenyue Wang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Operational Stability ◽  
Hybrid Perovskite ◽  
The Stability

An in situ cross-linked 1D/3D perovskite heterostructure achieved a perovskite solar cell with a 21.19% PCE and operational stability over 3000 hours.

Cesium carbonate as a surface modification material for organic–inorganic hybrid perovskite solar cells with enhanced performance

RSC Advances ◽  
2014 ◽  
Vol 4 (104) ◽  
pp. 60131-60134 ◽  
Author(s):  
Haopeng Dong ◽  
Xudong Guo ◽  
Wenzhe Li ◽  
Liduo Wang
Keyword(s):  
Surface Modification ◽  
Solar Cells ◽  
Perovskite Solar Cells ◽  
Charge Recombination ◽  
Cesium Carbonate ◽  
Inorganic Hybrid ◽  
Inorganic Perovskite ◽  
Hybrid Perovskite

Cs2CO3was used as surface modification material for organic–inorganic perovskite solar cells to retard the charge recombination at the mp-TiO2surface, leading to enhanced performance.

scholarly journals Efficient and Stable Large-Area Perovskite Solar Cells with Inorganic Perovskite/Carbon Quantum Dot-Graded Heterojunction

Research ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Qiang Sun ◽  
Cai Shen ◽  
Deyu Wang ◽  
Tao Zhang ◽  
Huaxia Ban ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Quantum Dot ◽  
Scale Up ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Solar Irradiation ◽  
Carbon Electrode ◽  
Inorganic Perovskite ◽  
Carbon Quantum Dot

This work reports on a compositionally graded heterojunction for photovoltaic application by cooperating fluorine-doped carbon quantum dots (FCQDs in short) into the CsPbI2.5Br0.5 inorganic perovskite layer. Using this CsPbI2.5Br0.5/FCQDs graded heterojunction in conjunction with low-temperature-processed carbon electrode, a power conversion efficiency of 13.53% for 1 cm2 all-inorganic perovskite solar cell can be achieved at AM 1.5G solar irradiation. To the best of our knowledge, this is one of the highest efficiency reported for carbon electrode based all-inorganic perovskite solar cells so far, and the first report of 1 cm2 carbon counter electrode based inorganic perovskite solar cell with PCE exceeding 13%. Moreover, the inorganic perovskite/carbon quantum dot graded heterojunction photovoltaics maintained over 90% of their initial efficiency after thermal aging at 85° for 1056 hours. This conception of constructing inorganic perovskite/FCQDs graded heterojunction offers a feasible pathway to develop efficient and stable photovoltaics for scale-up and practical applications.

Organic functional materials: recent advances in all-inorganic perovskite solar cells

2020 ◽  
Vol 4 (5) ◽  
pp. 2134-2148
Author(s):  
Lulu Wang ◽  
Bingbing Fan ◽  
Bing Zheng ◽  
Zhibing Yang ◽  
Penggang Yin ◽  
...  
Keyword(s):  
Solar Cells ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Functional Materials ◽  
Challenging Problem ◽  
Inorganic Hybrid ◽  
Inorganic Perovskite ◽  
Hybrid Perovskite

Although the power conversion efficiency (PCE) of organic–inorganic hybrid perovskite solar cells (PSCs) is comparable to those of commercial solar cells, a challenging problem of instability hampers their further commercialization.

Highly stable perovskite solar cells in humid and hot environment

2017 ◽  
Vol 5 (28) ◽  
pp. 14733-14740 ◽  
Author(s):  
Gill Sang Han ◽  
Jin Sun Yoo ◽  
Fangda Yu ◽  
Matthew Lawrence Duff ◽  
Bong Kyun Kang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Photovoltaic System ◽  
Next Generation ◽  
Promising Candidate ◽  
Inorganic Perovskite ◽  
Hot Environment ◽  
System P

An organic–inorganic perovskite solar cell (PSC) is a very promising candidate for a next-generation photovoltaic system.

scholarly journals Low photoactive phase temperature all-inorganic, tin–lead mixed perovskite solar cell

RSC Advances ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 3264-3271
Author(s):  
Chun-Hsiao Kuan ◽  
Hui-Hung Shen ◽  
Ching-Fuh Lin
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Annealing Temperature ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Inorganic Perovskite ◽  
Phase Temperature ◽  
Lattice Shrinkage

In Cs-based all inorganic perovskite solar cells based, doping Sn can cause lattice shrinkage, which reduces annealing temperature of forming photoactive phase.

Fluoroarene Derivative based Passivation of Perovskite Solar Cell Exhibiting Excellent Ambient and Thermo-Stability Achieving Efficiency > 20%†

2021 ◽  
Author(s):  
Maimur Hossain ◽  
Rabindranath Garai ◽  
Ritesh Kant Gupta ◽  
Rahul Narasimhan ◽  
Parameswar K Iyer
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Commercial Viability ◽  
Hybrid Perovskite ◽  
Thermo Stability ◽  
Amine Additives

Hybrid perovskite solar cells (PVSCs) are extremely susceptible to moisture and heat which restricts their commercial viability. Herein, three multifunctional fluoroaromatic amine additives i.e. 4-fluoroaniline (FA), 2,4,6-trifluoroaniline (TFA) and 2,3,4,5,6-pentafluoroaniline...

scholarly journals Ultrathin and compact electron transport layer made from novel water-dispersed Fe3O4 nanoparticles to accomplish UV-stable perovskite solar cells

2021 ◽  
Author(s):  
Song Fang ◽  
Bo Chen ◽  
Bangkai Gu ◽  
Linxing Meng ◽  
Hao Lu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Electron Transport ◽  
Perovskite Solar Cells ◽  
Perovskite Solar Cell ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Perovskite Material ◽  
Main Factors ◽  
Induced Decomposition

UV induced decomposition of perovskite material is one of main factors to severely destroy perovskite solar cells for instability. Here we report a UV stable perovskite solar cell with a...

Laser Crystallization of Organic–Inorganic Hybrid Perovskite Solar Cells

ACS Nano ◽  
2016 ◽  
Vol 10 (8) ◽  
pp. 7907-7914 ◽  
Author(s):  
Taewoo Jeon ◽  
Hyeong Min Jin ◽  
Seung Hyun Lee ◽  
Ju Min Lee ◽  
Hyung Il Park ◽  
...  
Keyword(s):  
Solar Cells ◽  
Perovskite Solar Cells ◽  
Laser Crystallization ◽  
Inorganic Hybrid ◽  
Hybrid Perovskite
Sign in / Sign up

Export Citation Format

Share Document