Stochastic multiple-input multiple-output channel model based on singular value decomposition

2015 ◽  
Vol 9 (15) ◽  
pp. 1852-1856 ◽  
Author(s):  
Yang Liu ◽  
Hong-bo Zhu ◽  
Yu Yu ◽  
Wen-Jun Lu
2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
Hasna Kilani ◽  
Mohamed Tlich ◽  
Rabah Attia

This paper evaluates the performance of closed loop multiple input multiple output power line communication (CL MIMO PLC) system based on enhanced zero-forcing (ZF) equalizer. In this work, the two-sided Jacobi (TSJ) algorithm has been investigated for the computation of singular value decomposition of the channel matrix. Quantized parameters are feedback from the receiver to the transmitter for precoding process. Numerous simplifications are introduced for the reduction of the algorithm complexity. The performance of the CL MIMO PLC is evaluated in terms of bit error rate (BER), constellation error vector magnitude (EVM), and mean square error (MSE) between the constructed SVD matrices and Matlab computed ones.


Author(s):  
Zeliang Wang ◽  
André Sandmann ◽  
John G. McWhirter ◽  
Andreas Ahrens

Polynomial singular value decomposition (PSVD) plays a very important role in broadband multiple-input multiple-output (MIMO) systems. One of its applications lies in the decoupling of MIMO convolutive mixing channel matrixin order to recover the transmitted signals corrupted by the channel interference (CI) at the receiver. In this paper, a novel algorithm, known as multiple shift second order sequential best rotation (MS-SBR2), is proposed to compute the approximate PSVD of the broadband MIMO channel matrix. Experimental examples, including a measured (2 × 2) optical MIMO channel impulse response using the multi-mode fiber (MMF) testbed, are presented to examine the proposed algorithm. Bit error rate (BER) performances are evaluated among different transmission schemes. In addition, power allocation (PA) schemes are investigated to further optimize the BER performance.


2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Yoshio Karasawa ◽  
Katsuhiro Nakada ◽  
Guijiang Sun ◽  
Rikako Kotani

We present four new developments for a multiple-input multiple-output (MIMO) over-the-air measurement system based on our previous studies. The first two developments relate to the channel model for multipath environment generation. One is a further simplification of the circuit configuration without performance degradation by reducing the number of delay generation units, which dominate the performance limit when implementing the circuit on a field-programmable gate array (FPGA). The other is to realize spatial correlation characteristics among the input ports on the transmission side, whereas the previously proposed channel model did not consider this correlation. The third development involves the details of implementing the MIMO fading emulator on an FPGA as a two-stage scheme. The fourth is the demonstration of application examples of the developed system.


2013 ◽  
Vol 2013 ◽  
pp. 1-30 ◽  
Author(s):  
Athanasios G. Lazaropoulos

This review paper reveals the broadband potential of overhead and underground low-voltage (LV) and medium-voltage (MV) broadband over power lines (BPL) networks associated with multiple-input multiple-output (MIMO) technology. The contribution of this review paper is fourfold. First, the unified value decomposition (UVD) modal analysis is introduced. UVD modal analysis is a new technique that unifies eigenvalue decomposition (EVD) and singular value decomposition (SVD) modal analyses achieving the common handling of traditional SISO/BPL and upcoming MIMO/BPL systems. The validity of UVD modal analysis is examined by comparing its simulation results with those of other exact analytical models. Second, based on the proposed UVD modal analysis, the MIMO channels of overhead and underground LV and MV BPL networks (distribution BPL networks) are investigated with regard to their inherent characteristics. Towards that direction, an extended collection of well-validated metrics from the communications literature, such as channel attenuation, average channel gain (ACG), root-mean-square delay spread (RMS-DS), coherence bandwidth (CB), cumulative capacity, capacity complementary cumulative distribution function (CCDF), and capacity gain (GC), is first applied in overhead and underground MIMO/LV and MIMO/MV BPL channels and systems. It is found that the results of the aforementioned metrics portfolio depend drastically on the frequency, the power grid type (either overhead or underground, either LV or MV), the MIMO scheme configuration properties, the MTL configuration, the physical properties of the cables used, the end-to-end distance, and the number, the electrical length, and the terminations of the branches encountered along the end-to-end BPL signal propagation. Third, three interesting findings concerning the statistical properties of MIMO channels of distribution BPL networks are demonstrated, namely, (i) the ACG, RMS-DS, and cumulative capacity lognormal distributions; (ii) the correlation between RMS-DS and ACG; and (iii) the correlation between RMS-DS and CB. By fitting the numerical results, unified regression distributions appropriate for MIMO/BPL channels and systems are proposed. These three fundamental properties can play significant role in the evaluation of recently proposed statistical channel models for various BPL systems. Fourth, the potential of transformation of overhead and underground LV/BPL and MV/BPL distribution grids to an alternative solution to fiber-to-the-building (FTTB) technology is first revealed. By examining the capacity characteristics of various MIMO scheme configurations and by comparing these capacity results against SISO ones, a new promising urban backbone network seems to be born in a smart grid (SG) environment.


Sign in / Sign up

Export Citation Format

Share Document