Compact dual-band bandpass filter with controllable bandwidths using stub-loaded multiple-mode resonator

2012 ◽  
Vol 6 (10) ◽  
pp. 1172 ◽  
Author(s):  
F.C. Chen ◽  
Q.X. Chu ◽  
Z.H. Li ◽  
X.H. Wu
Frequenz ◽  
2016 ◽  
Vol 70 (9-10) ◽  
Author(s):  
Chuanming Zhu ◽  
Jin Xu ◽  
Wei Kang ◽  
Zhenxin Hu ◽  
Wen Wu

AbstractIn this paper, a miniaturized dual-band bandpass filter (DB-BPF) using embedded dual-mode resonator (DMR) with controllable bandwidths is proposed. Two passbands are generated by two sets of resonators operating at two different frequencies. One set of resonators is utilized not only as the resonant elements that yield the lower passband, but also as the feeding structures with source-load coupling to excite the other to produce the upper passband. Sufficient degrees of freedom are achieved to control the center frequencies and bandwidths of two passbands. Moreover, multiple transmission zeros (TZs) are created to improve the passband selectivity of the filter. The design of the filter has been demonstrated by the measurement. The filter features not only miniaturized circuit sizes, low insertion loss, independently controllable central frequencies, but also controllable bandwidths and TZs.


2020 ◽  
Vol 71 (6) ◽  
pp. 433-435
Author(s):  
Shan Shan Gao ◽  
Jia-Lin Li ◽  
Zhe Lin Zhu ◽  
Jia Li Xu ◽  
Yong Xin Zhao

AbstractAn improved feedline configuration for dual-mode resonator filter is investigated in this paper. Based on the introduced topology, a dual-mode dual-band bandpass filter with center frequencies of 1.8 and 2.4 GHz is optimally designed, fabricated and tested. The introduced dual-band bandpass filter has simple structure and enables high selectivity to be realized due to two pairs of transmission zeros located near to the lower and upper passband, respectively. Both measured and simulated performances are presented with good consistency.


2018 ◽  
Vol 27 (06) ◽  
pp. 1850085
Author(s):  
A. Uma Maheswari ◽  
K. Latha

This paper presents a 6-gon-shaped bandpass and notch filters for Cognitive Radio (CR) applications. The bandpass filter consists of a 6-gon-shaped multiple mode resonator with interdigital coupling at both ends. The notch filter is derived from bandpass filter by embedding four identical Embedded Open Stubs (EOS) nearby the multiple mode resonators that introduce narrow band suppression in the desired passband. Such bandpass filter with notching band is required in practical CR systems in order to effectively sense the spectrum and avoid the interference between the systems working in same environment with the same frequency. The filter is simulated using an electromagnetic solver, IE3D. The group delay obtained for bandpass filter is below 0.2[Formula: see text]ns. With the above structural features, the overall dimension of the filter is [Formula: see text][Formula: see text]mm2 and the fractional bandwidth (FBW) of the proposed bandpass filter is more than 100% with optimal performances in terms of insertion loss, return loss, group delay and phase.


2020 ◽  
Vol 30 (5) ◽  
pp. 477-480
Author(s):  
Jian-Hui Guo ◽  
Sai-Wai Wong ◽  
Jing-Yu Lin ◽  
Yin Li ◽  
Long Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document