scholarly journals Verification of the combined sewage system simulation model based on the example of the city of Głogów

2018 ◽  
Vol 45 ◽  
pp. 00058 ◽  
Author(s):  
Ireneusz Nowogoński ◽  
Ewa Ogiołda

Using SWMM 5.1 (Storm Water Management Model) software, a model of sewage system functioning in Głogów was developed. It was calibrated based on the results of field studies from the years 2011– 14, while the properness of its activity was verified for the results of measurements carried out during the period 1998–2000. The verification of the model showed acceptable discrepancies between the measured and simulated values of channel depth. Factors which caused differences were indicated and, on the basis of this, conclusions pertaining to further studies were formulated.

2018 ◽  
Vol 28 (3) ◽  
pp. 111-120
Author(s):  
Ireneusz Nowogoński

Abstract The verification of simulation model of combined sewage system was presented in article. The model of sewage system functioning in Głogów was developed using SWMM 5.1 (Storm Water Management Model) software. It was calibrated based on the results of field studies from the years 2011–13, while the properness of its activity was verified for the results of measurements carried out in 2014. The verification of the model showed acceptable discrepancies between the measured and simulated values of flow rates. Factors which caused differences were indicated and, on the basis of this, conclusions pertaining to further studies were formulated.


Proceedings ◽  
2018 ◽  
Vol 2 (11) ◽  
pp. 640 ◽  
Author(s):  
Ioannis M. Kourtis ◽  
Vassilios A. Tsihrintzis ◽  
Evangelos Baltas

The present work aims at quantifying the benefit of Low Impact Development (LID) practices in reducing peak runoff and runoff volume, and at comparing LID practices to conventional stormwater solutions. The hydrologic-hydraulic model used was the Storm Water Management Model (SWMM5.1). The LID practices modeled were: (i) Green roofs; and (ii) Permeable pavements. Each LID was tested independently and compared to two different conventional practices, i.e., sewer enlargement and detention pond design. Results showed that for small storm events LID practices are comparable to conventional measures, in reducing flooding. Overall, smaller storms should be included in the design process.


2015 ◽  
Vol 31 (4) ◽  
pp. 462-476 ◽  
Author(s):  
Gaurav V. Jain ◽  
Ritesh Agrawal ◽  
R.J. Bhanderi ◽  
P. Jayaprasad ◽  
J.N. Patel ◽  
...  

2020 ◽  
Vol 3 (2) ◽  
pp. 143-154
Author(s):  
Rahmat Faizal ◽  
Noerman Adi Prasetya ◽  
Zikri Alstony ◽  
Aditya Rahman

Tarakan City experiences problems with standing water during the rainy season, especially in the west Tarakan sub-district which is the center of Tarakan. This puddle not only submerged settlements and offices but also shops and access roads that caused considerable economic losses. An evaluation was carried out by using the Storm Water Management Model (SWMM). SWMM is a rainfall-runoff simulation model used for simulating the quantity and quality of surface runoff from urban areas. Based on the evaluation using SWMM software, the drainage system in Tarakan, especially in Jalan Mulwarman has several inundated channels, namely channels 2, 3, 4, 5, 6, 7, 11, 12, 13, 14. This is influenced by the dimensions of the drainage channel that cannot accommodate existing water runoff and sediment thickness that covers the drainage channels so that the capacity is reduced, if it rains it will cause puddles at several points in Tarakan City. In order to deal with these puddles, it is necessary to change the dimensions of the channel and routinely dredge sediments that cover the drainage channels.


2020 ◽  
Vol 10 (12) ◽  
Author(s):  
Hussein Abed Obaid Alisawi

AbstractThe objective of the present study to assess the performance of a suggested sewer line by using pipe jacking system (PJS) in order to enhance the sewage capacity and mitigate sewer flooding of historic pilgrimage city of Karbala, Iraq. The storm water management model (SWMM5) was used for this purpose. The simulation of exiting sewer system reveals that sewer discharge during peak pilgrimage period is more than 200% of the capacity of existing sewer line. Installation of SLL having a diameter of 2.5 m at a depth ranging between 12 and 22 m by PJS can reduce water depth in sewer pipe by 78%. The reduction of water depth at sewer pipe can reduce sewer overflow up to 70%, if the system is installed and managed properly. The methodology proposed in the paper can be applied in any location having similar problem with necessary modifications.


2015 ◽  
Vol 744-746 ◽  
pp. 1146-1150
Author(s):  
Zheng Rong Fu ◽  
Jia Xin Zhuang ◽  
Liang Zhu Wang

The drainage system of a part of a university campus was tapped using SWMM (Storm Water Management Model). Local drainage discharge capacity was studied under different design storm return period. Results show that flooding and overload at some junctions and in some conduits are doubled with the increase of design rain return period from one year to five year, which may deteriorate the traffic and road base.


Sign in / Sign up

Export Citation Format

Share Document