scholarly journals Day-ahead Optimal Scheduling of Regenerative Electric Heating System Considering Load Imbalance

2021 ◽  
Vol 271 ◽  
pp. 01027
Author(s):  
Fei Xu ◽  
Ling Hao ◽  
Lei Chen ◽  
Qun Chen ◽  
Yong Min

For the regenerative electric heating system, on the premise of ensuring reliable heat supply to users, a day-ahead optimization scheduling method for the regenerative electric heating system considering the load imbalance is proposed. First, users' heating demand under normal working conditions and grid power rationing scenarios are calculated by estimate index method. Then, in order to match the heating demand of users and reduce the load imbalance caused by thermal storage electric heating in the distribution network, comprehensive consideration of grid constraints and the adjustable capacity of regenerative electric heating load, the operating strategy of the thermal storage electric heating system is studied. Reasonable control of heat storage and release in regenerative electric heating can not only reduce the distribution line pressure during heating period, but also maximize the accommodation of low-cost electricity such as surplus renewable energy and improve the economic benefits of the system. Taking the regenerative electric heating system in Chongli area of Zhangjiakou, Hebei Province as an example, the multi-objective optimal scheduling model is simulated and analyzed, and the feasibility and effectiveness of the proposed optimal scheduling strategy are verified.

2021 ◽  
Vol 271 ◽  
pp. 01026
Author(s):  
Lu Jing ◽  
Liu Lei ◽  
Kong Weizheng ◽  
Pan Fangyuan

Replacing fossil energy with the high proportion of renewable energy power in the field of enduse energy is the main way to reduce carbon emissions from energy combustion. Building heating is an important component in the field of end-use energy. The thermal storage electric heating system could use wind power during low power load periods at night for building heating. On the one hand, it helps to solve the problem of wind power accommodation, on the other hand it helps to achieve carbon emission reduction in the field of building heating. Based on the background of the thermal storage electric heating system for wind power accommodation, the influencing factors that affect the efficiency and benefits of electric heating system is analysed, and fuzzy comprehensive evaluation method based on analytic hierarchy process (AHP) is used to construct regenerative electric heating system operation management evaluation system.


Energy ◽  
2020 ◽  
Vol 204 ◽  
pp. 117951 ◽  
Author(s):  
Jidong Wang ◽  
Jianxin Liu ◽  
Chenghao Li ◽  
Yue Zhou ◽  
Jianzhong Wu

2021 ◽  
Vol 252 ◽  
pp. 01016
Author(s):  
Da Lin ◽  
Chouwei Ni ◽  
Xuesong Zhang ◽  
Junhao Huang

Integrated power and heat system (IPHS) is a typical multi-energy system which involves power system and district heating system (DHS). The utilization of thermal flexibilities in the joint operation of power system and district heating system has shown the potential to improve energy efficiency and economic performance. In this paper, an optimal scheduling method for IPHS with multiple thermal flexibilities is proposed. Thermal flexibilities of electric boilers and district heating network (DHN) are modelled and analysed, in which the flexibility of DHN is described by a detailed node-based quasi-dynamic model. The proposed scheduling method is to minimize the operation cost of IPHS. Case study is carried out on a typical IPHS with a 6-node power system and a 12-node DHS. Simulation results show that the scheduling method can reduce the operation cost of IPHS and improve wind accommodation.


2020 ◽  
Vol 67 (1) ◽  
pp. 42-47
Author(s):  
Anatoliy I. Sopov ◽  
Aleksandr V. Vinogradov

In power transformers, energy losses in the form of heat are about 2 percent of their rated power, and in transformers of large power centers reach hundreds of kilowatts. Heat is dissipated into the environment and heats the street air. Therefore, there is a need to consume this thermal energy as a source of heat supply to nearby facilities. (Research purpose) To develop methods and means of using excess heat of power transformers with improvement of their cooling system design. (Materials and methods) The authors applied following methods: analysis, synthesis, comparison, monographic, mathematical and others. They analyzed various methods for consuming excess heat from power transformers. They identified suitable heat supply sources among power transformers and potential heat consumers. The authors studied the reasons for the formation of excess heat in power transformers and found ways to conserve this heat to increase the efficiency of its selection. (Results and discussion) The authors developed an improved power transformer cooling system design to combine the functions of voltage transformation and electric heating. They conducted experiments to verify the effectiveness of decisions made. A feasibility study was carried out on the implementation of the developed system using the example of the TMG-1000/10/0.4 power transformer. (Conclusions) The authors got a new way to use the excess heat of power transformers to heat the AIC facilities. It was determined that the improved design of the power transformer and its cooling system using the developed solutions made it possible to maximize the amount of heat taken off without quality loss of voltage transformation.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4675
Author(s):  
Ayat-allah Bouramdane ◽  
Alexis Tantet ◽  
Philippe Drobinski

In this study, we examine how Battery Storage (BES) and Thermal Storage (TES) combined with solar Photovoltaic (PV) and Concentrated Solar Power (CSP) technologies with an increased storage duration and rental cost together with diversification would influence the Moroccan mix and to what extent the variability (i.e., adequacy risk) can be reduced; this is done using recent (2013) cost data and under various penetration scenarios. To do this, we use MERRA-2 climate reanalysis to simulate hourly demand and capacity factors (CFs) of wind, solar PV and CSP without and with increasing storage capabilities—as defined by the CSP Solar Multiple (SM) and PV Inverter Loading Ratio (ILR). We adjust these time series to observations for the four Moroccan electrical zones over the year 2018. Our objective is to maximize the renewable (RE) penetration and minimize the imbalances between RE production and consumption considering three optimization strategies. We analyze mixes along Pareto fronts using the Mean-Variance Portfolio approach—implemented in the E4CLIM model—in which we add a maximum-cost constraint to take into account the different rental costs of wind, PV and CSP. We propose a method to calculate the rental cost of storage and production technologies taking into account the constraints on storage associated with the increase of SM and ILR in the added PV-BES and CSP-TES modules, keeping the mean solar CFs fixed. We perform some load bands-reduction diagnostics to assess the reliability benefits provided by each RE technology. We find that, at low penetrations, the maximum-cost budget is not reached because a small capacity is needed. The higher the ILR for PV, the larger the share of PV in the mix compared to wind and CSP without storage is removed completely. Between PV-BES and CSP-TES, the latter is preferred as it has larger storage capacity and thus stronger impact in reducing the adequacy risk. As additional BES are installed, more than TES, PV-BES is favored. At high penetrations, optimal mixes are impacted by cost, the more so as CSP (resp., PV) with high SM (resp., ILR) are installed. Wind is preferably installed due to its high mean CF compared to cost, followed by either PV-BES or CSP/CSP-TES. Scenarios without or with medium storage capacity favor CSP/CSP-TES, while high storage duration scenarios are dominated by low-cost PV-BES. However, scenarios ignoring the storage cost and constraints provide more weight to PV-BES whatever the penetration level. We also show that significant reduction of RE variability can only be achieved through geographical diversification. Technological complementarity may only help to reduce the variance when PV and CSP are both installed without or with a small amount of storage. However, the diversification effect is slightly smaller when the SM and ILR are increased and the covariances are reduced as well since mixes become less diversified.


Author(s):  
T. G. Ambaye ◽  
M. Vaccari ◽  
E. D. van Hullebusch ◽  
A. Amrane ◽  
S. Rtimi

AbstractCurrently, due to the rapid growth of urbanization and industrialization in developing countries, a large volume of wastewater is produced from industries that contain chemicals generating high environmental risks affecting human health and the economy if not treated properly. Consequently, the development of a sustainable low-cost wastewater treatment approach has attracted more attention of policymakers and scientists. The present review highlights the recent applications of biochar in removing organic and inorganic pollutants present in industrial effluents. The recent modes of preparation, physicochemical properties and adsorption mechanisms of biochar in removing organic and inorganic industrial pollutants are also reviewed comprehensively. Biochar showed high adsorption of industrial dyes up to 80%. It also discusses the recent application and mechanism of biochar-supported photocatalytic materials for the degradation of organic contaminants in wastewater. We reviewed also the possible optimizations (such as the pyrolysis temperature, solution pH) allowing the increase of the adsorption capabilities of biochar leading to organic contaminants removal. Besides, increasing the pyrolysis temperature of the biochar was seen to lead to an increase in its surface area, while it decreases their amount of oxygen-containing functional groups, consequently leading to a decrease in the adsorption of metal (loid) ions present in the medium. Finally, the review suggests that more research should be carried out to optimize the main parameters involved in biochar production and its regeneration methods. Future efforts should be also carried out towards process engineering to improve its adsorption capacity to increase the economic benefits of its implementation.


2015 ◽  
Vol 16 (6) ◽  
pp. 579-589 ◽  
Author(s):  
Tsubasa Shimoji ◽  
Hayato Tahara ◽  
Hidehito Matayoshi ◽  
Atsushi Yona ◽  
Tomonobu Senjyu

Abstract From the perspective of global warming suppression and the depletion of energy resources, renewable energies, such as the solar collector (SC) and photovoltaic generation (PV), have been gaining attention in worldwide. Houses or buildings with PV and heat pumps (HPs) are recently being used in residential areas widely due to the time of use (TOU) electricity pricing scheme which is essentially inexpensive during middle-night and expensive during day-time. If fixed batteries and electric vehicles (EVs) can be introduced in the premises, the electricity cost would be even more reduced. While, if the occupants arbitrarily use these controllable loads respectively, power demand in residential buildings may fluctuate in the future. Thus, an optimal operation of controllable loads such as HPs, batteries and EV should be scheduled in the buildings in order to prevent power flow from fluctuating rapidly. This paper proposes an optimal scheduling method of controllable loads, and the purpose is not only the minimization of electricity cost for the consumers, but also suppression of fluctuation of power flow on the power supply side. Furthermore, a novel electricity pricing scheme is also suggested in this paper.


Sign in / Sign up

Export Citation Format

Share Document