scholarly journals Contact evolution in granular materials with inherently anisotropic fabric

2021 ◽  
Vol 249 ◽  
pp. 06015
Author(s):  
Gustavo Pinzón ◽  
Edward Andò ◽  
Alessandro Tengattini ◽  
Gioacchino Viggiani ◽  
Jacques Desrues
Keyword(s):  
Triaxial Compression ◽  
Compression Tests ◽  
Metrological Work ◽  
X Ray ◽  
Oblate Spheroids ◽  
The Mean ◽  
A New Technique ◽  
Triaxial Compression Tests ◽  
Loading Axis ◽  
Contact Orientation

This paper presents the results of two triaxial compression tests performed on approximately 9×103 oblate spheroids (lentils) with different initial orientations with respect to the loading axis (approximately 30° and 60°). Typical stress-strain information is complemented with x-ray tomography scans every 1 % strain. Starting from an initial labelling of particles, a new technique is used to obtain unprecedented detail of tracking of all the particles through time. This rich dataset is analysed from the perspective of inter-particle contacts (building on previous metrological work on this subject) revealing that the mean contact orientation in both samples rotates towards the direction of σ1 at a rate depending on the initial orientation. Different trends are observed for the alignment of contact orientation, with a significant evolution observed in the sample prepared at 30° which is not as pronounced as in the other sample.

scholarly journals Stress–Dilatancy For Crushed Latite Basalt

2018 ◽  
Vol 40 (1) ◽  
pp. 6-10 ◽  
Author(s):  
Katarzyna Dołżyk-Szypcio
Keyword(s):  
Triaxial Compression ◽  
State Theory ◽  
Advanced Stage ◽  
Compression Tests ◽  
Strain Behaviour ◽  
Initial Stage ◽  
The Mean ◽  
Straight Lines ◽  
The Relationship ◽  
Triaxial Compression Tests

AbstractIn this article, the stress–dilatancy relationship for crushed latite basalt is analysed by using Frictional State Theory. The relationship is bilinear, and the parameters α and β determine these two straight lines. At the initial stage of shearing, the mean normal stress increment mainly influences breakage, but at the advanced stage, it is shear deformation that influences breakage. At the advanced stage of shearing, the parameter αpt represents energy consumption because of breakage and βpt mainly represents changes in volume caused by breakage during shear. It is also shown that breakage effect is significant at small stress levels and the η-Dp plane is important to fully understand the stress–strain behaviour of crushed latite basalt in triaxial compression tests.

A Simple Unconsolidated Undrained Triaxial Compression Test Emulator

2015 ◽  
Vol 771 ◽  
pp. 104-107
Author(s):  
Riska Ekawita ◽  
Hasbullah Nawir ◽  
Suprijadi ◽  
Khairurrijal
Keyword(s):  
Triaxial Compression ◽  
Measurement Data ◽  
Radial Strain ◽  
Compression Tests ◽  
Viscous Effects ◽  
Axial Pressure ◽  
Strain Stress ◽  
The University ◽  
And Storage ◽  
Triaxial Compression Tests

An unconsolidated undrained (UU) test is one type of triaxial compression tests based on the nature of loading and drainage conditions. In order to imitate the UU triaxial compression tests, a UU triaxial emulator with a graphical user interface (GUI) was developed. It has 5 deformation sensors (4 radial deformations and one vertical deformation) and one axial pressure sensor. In addition, other inputs of the emulator are the cell pressure, the height of sample, and the diameter of sample, which are provided by the user. The emulator also facilitates the analysis and storage of measurement data. Deformation data fed to the emulator were obtained from real measurements [H. Nawir, Viscous effects on yielding characteristics of sand in triaxial compression, Dissertation, Civil Eng. Dept., The University of Tokyo, 2002]. Using the measurement data, the stress vs radial strain, stress vs vertical strain, and Mohr-Coulomb circle curves were obtained and displayed by the emulator.

Strength envelope of granular soil stabilized by multi-axial geogrid in large triaxial tests

2020 ◽  
Vol 57 (3) ◽  
pp. 448-452 ◽  
Author(s):  
A.S. Lees ◽  
J. Clausen
Keyword(s):  
Triaxial Compression ◽  
Triaxial Tests ◽  
Compression Tests ◽  
Failure Envelope ◽  
Element Analysis ◽  
Linear Elastic ◽  
Perfectly Plastic ◽  
Elastic Perfectly Plastic ◽  
Triaxial Compression Tests ◽  
Properties Of Soil

Conventional methods of characterizing the mechanical properties of soil and geogrid separately are not suited to multi-axial stabilizing geogrid that depends critically on the interaction between soil particles and geogrid. This has been overcome by testing the soil and geogrid product together as one composite material in large specimen triaxial compression tests and fitting a nonlinear failure envelope to the peak failure states. As such, the performance of stabilizing, multi-axial geogrid can be characterized in a measurable way. The failure envelope was adopted in a linear elastic – perfectly plastic constitutive model and implemented into finite element analysis, incorporating a linear variation of enhanced strength with distance from the geogrid plane. This was shown to produce reasonably accurate simulations of triaxial compression tests of both stabilized and nonstabilized specimens at all the confining stresses tested with one set of input parameters for the failure envelope and its variation with distance from the geogrid plane.

scholarly journals Semi-empirical elastic–thermoviscoplastic model for clay

2016 ◽  
Vol 53 (10) ◽  
pp. 1583-1599 ◽  
Author(s):  
David Kurz ◽  
Jitendra Sharma ◽  
Marolo Alfaro ◽  
Jim Graham
Keyword(s):  
Stress Level ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Compression Tests ◽  
One Dimensional ◽  
Load Duration ◽  
Compression Creep ◽  
Overconsolidated Clays ◽  
Semi Empirical ◽  
Triaxial Compression Tests

Clays exhibit creep in compression and shear. In one-dimensional compression, creep is commonly known as “secondary compression” even though it is also a significant component of deformations resulting from shear straining. It reflects viscous behaviour in clays and therefore depends on load duration, stress level, the ratio of shear stress to compression stress, strain rate, and temperature. Research described in the paper partitions strains into elastic (recoverable) and plastic (nonrecoverable) components. The plastic component includes viscous strains defined by a creep rate coefficient ψ that varies with plasticity index and temperature (T), but not with stress level or overconsolidation ratio (OCR). Earlier elastic–viscoplastic (EVP) models have been modified so that ψ = ψ(T) in a new elastic–thermoviscoplastic (ETVP) model. The paper provides a sensitivity analysis of simulated results from undrained (CIŪ) triaxial compression tests for normally consolidated and lightly overconsolidated clays. Axial strain rates range from 0.15%/day to 15%/day, and temperatures from 28 to 100 °C.

Sign in / Sign up

Export Citation Format

Share Document