scholarly journals Semi-empirical elastic–thermoviscoplastic model for clay

2016 ◽  
Vol 53 (10) ◽  
pp. 1583-1599 ◽  
Author(s):  
David Kurz ◽  
Jitendra Sharma ◽  
Marolo Alfaro ◽  
Jim Graham
Keyword(s):  
Stress Level ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Compression Tests ◽  
One Dimensional ◽  
Load Duration ◽  
Compression Creep ◽  
Overconsolidated Clays ◽  
Semi Empirical ◽  
Triaxial Compression Tests

Clays exhibit creep in compression and shear. In one-dimensional compression, creep is commonly known as “secondary compression” even though it is also a significant component of deformations resulting from shear straining. It reflects viscous behaviour in clays and therefore depends on load duration, stress level, the ratio of shear stress to compression stress, strain rate, and temperature. Research described in the paper partitions strains into elastic (recoverable) and plastic (nonrecoverable) components. The plastic component includes viscous strains defined by a creep rate coefficient ψ that varies with plasticity index and temperature (T), but not with stress level or overconsolidation ratio (OCR). Earlier elastic–viscoplastic (EVP) models have been modified so that ψ = ψ(T) in a new elastic–thermoviscoplastic (ETVP) model. The paper provides a sensitivity analysis of simulated results from undrained (CIŪ) triaxial compression tests for normally consolidated and lightly overconsolidated clays. Axial strain rates range from 0.15%/day to 15%/day, and temperatures from 28 to 100 °C.

True Shear Parameters of Saturated Clays

1973 ◽  
Vol 10 (4) ◽  
pp. 652-663
Author(s):  
A. Sridharan ◽  
S. Narasimha Rao
Keyword(s):  
Stress Level ◽  
Pore Water Pressure ◽  
Initial Conditions ◽  
Water Pressure ◽  
Triaxial Compression ◽  
Compression Tests ◽  
Strength Parameters ◽  
Test Procedures ◽  
Stress History ◽  
Triaxial Compression Tests

Ever since Hvorslev proposed a failure criterion incorporating intrinsic parameters, several test procedures have come into practice to determine these ‘true’ strength parameters. Several consolidated undrained triaxial compression tests with pore water pressure measurement were conducted on both montmorillonite and kaolinite clays and the results were analyzed using different existing methods. All the methods through which the data were analyzed fail to assign any unique true strength parameters. Even a particular method yields different values depending upon the initial conditions (stress history, water content) of the sample and stress level during testing. It has been reasoned that these variations are due to the probable differences in fabric between the samples which are involved in various methods. There seems to be a unique linear relationship between tan [Formula: see text] and Cc/pe irrespective of the sample state, stress level, and stress history in both undisturbed and remolded conditions for all the procedures adopted.

scholarly journals Effect of Compaction Banding on the Hydraulic Properties of Porous Rock: Part I—Experimental Investigation

2021 ◽  
Author(s):  
Julia Leuthold ◽  
Eleni Gerolymatou ◽  
Maximiliano R. Vergara ◽  
Theodoros Triantafyllidis
Keyword(s):  
Hydraulic Properties ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Shear Bands ◽  
Experimental Investigations ◽  
Porous Rocks ◽  
Compression Tests ◽  
Compaction Bands ◽  
Maximum Permeability ◽  
Triaxial Compression Tests

AbstractThe mechanical behavior and the influence of compaction banding on the hydraulic properties in soft porous rocks were studied. The tested rock was Calcarenite Tuffeau de Maastricht. In the frame of experimental investigations, triaxial and oedometric tests were conducted under dry and drained conditions. The results demonstrated that the rock is forming discrete compaction bands under high confining stresses and steep angle shear bands under low confining stresses. Permeability measurements during the oedometric and triaxial compression tests under drained conditions demonstrated that the axial permeability decreases with increasing axial strain. The maximum permeability decrease was three orders of magnitude for 40% of axial strain.

scholarly journals Experimental Investigation on the Deformation, Strength, and Acoustic Emission Characteristics of Sandstone under True Triaxial Compression

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Zhaolin Li ◽  
Lianguo Wang ◽  
Yinlong Lu ◽  
Wenshuai Li ◽  
Kai Wang
Keyword(s):  
Acoustic Emission ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Lateral Strain ◽  
Compression Tests ◽  
True Triaxial ◽  
Shear Slip ◽  
True Triaxial Compression ◽  
Triaxial Compression Tests

The study of deformation, strength, and other mechanical characteristics of sandstone under true triaxial compression is significant for understanding failure mechanisms in rock and evaluating the stability of underground structures. Conventional and true triaxial compression tests for sandstone are conducted for different stress states in this study using the self-developed true triaxial electrohydraulic servo test system combined with acoustic emission (AE) testing. This study presents an in-depth and systematic investigation of deformation, strength, and AE characteristics. The results show significant differences in deformation, strength, and acoustic emission characteristics for the rock under conventional triaxial and true triaxial compression tests, respectively. The peak strength, axial strain, lateral strain, and incremental strain (in unstable crack growth stage) increase with increasing confining pressure under conventional triaxial compression, and the AE count gradually decreases while shear crack proportion gradually increases, indicating that increasing confining pressure gradually inhibits the shear slip effect along fractures, delays perforation of the rock shear fracture surface, and enhances the ability of the rock to withstand deformation and load. Under true triaxial compression, the peak strength increases and then decreases with increasing intermediate principal stress σ2 and the axial strain ε1 and lateral strain ε2 gradually decrease; besides, the lateral strain (expansion) of the rock is mainly in the minimum principal stress σ3 direction, and lateral expansion tends to decrease before increasing. AE events first weaken and then enhance with increasing σ2, and the proportion of shear cracks increases first and then decreases, indicating that the confining pressure gradually changes from the shear slip effect that controls crack offset to the damage effect that promotes crack tension with increasing σ2. In addition, the protective effect of confining pressure improves when σ3 increases.

Swelling and softening behaviour of La Biche shale

1998 ◽  
Vol 35 (2) ◽  
pp. 206-221 ◽  
Author(s):  
RCK Wong
Keyword(s):  
Electrolyte Concentration ◽  
Triaxial Compression ◽  
Strength Loss ◽  
Test Results ◽  
Compression Tests ◽  
Swelling Behaviour ◽  
One Dimensional ◽  
Failure Theory ◽  
Free Swell ◽  
Triaxial Compression Tests

Free swell, semiconfined swell, and one-dimensional oedometer swell tests were performed on La Biche shale specimens in solutions of different salinities. The swelling behaviour of La Biche shale was found to be highly anisotropic and dependent on electrolyte concentration, stress, and swelling history. Drained triaxial compression tests were conducted on La Biche shale specimens subjected to different degrees of swelling. The test results indicate that the Young's modulus decreases with increasing swelling. The strength loss due to swelling can be explained by the Hvorslev failure theory. A descending power law is proposed to describe the cohesion reduction with the swelling.Key words: shale, salinity, swelling, strength weakening, modulus softening.

A Simple Unconsolidated Undrained Triaxial Compression Test Emulator

2015 ◽  
Vol 771 ◽  
pp. 104-107
Author(s):  
Riska Ekawita ◽  
Hasbullah Nawir ◽  
Suprijadi ◽  
Khairurrijal
Keyword(s):  
Triaxial Compression ◽  
Measurement Data ◽  
Radial Strain ◽  
Compression Tests ◽  
Viscous Effects ◽  
Axial Pressure ◽  
Strain Stress ◽  
The University ◽  
And Storage ◽  
Triaxial Compression Tests

An unconsolidated undrained (UU) test is one type of triaxial compression tests based on the nature of loading and drainage conditions. In order to imitate the UU triaxial compression tests, a UU triaxial emulator with a graphical user interface (GUI) was developed. It has 5 deformation sensors (4 radial deformations and one vertical deformation) and one axial pressure sensor. In addition, other inputs of the emulator are the cell pressure, the height of sample, and the diameter of sample, which are provided by the user. The emulator also facilitates the analysis and storage of measurement data. Deformation data fed to the emulator were obtained from real measurements [H. Nawir, Viscous effects on yielding characteristics of sand in triaxial compression, Dissertation, Civil Eng. Dept., The University of Tokyo, 2002]. Using the measurement data, the stress vs radial strain, stress vs vertical strain, and Mohr-Coulomb circle curves were obtained and displayed by the emulator.

Strength envelope of granular soil stabilized by multi-axial geogrid in large triaxial tests

2020 ◽  
Vol 57 (3) ◽  
pp. 448-452 ◽  
Author(s):  
A.S. Lees ◽  
J. Clausen
Keyword(s):  
Triaxial Compression ◽  
Triaxial Tests ◽  
Compression Tests ◽  
Failure Envelope ◽  
Element Analysis ◽  
Linear Elastic ◽  
Perfectly Plastic ◽  
Elastic Perfectly Plastic ◽  
Triaxial Compression Tests ◽  
Properties Of Soil

Conventional methods of characterizing the mechanical properties of soil and geogrid separately are not suited to multi-axial stabilizing geogrid that depends critically on the interaction between soil particles and geogrid. This has been overcome by testing the soil and geogrid product together as one composite material in large specimen triaxial compression tests and fitting a nonlinear failure envelope to the peak failure states. As such, the performance of stabilizing, multi-axial geogrid can be characterized in a measurable way. The failure envelope was adopted in a linear elastic – perfectly plastic constitutive model and implemented into finite element analysis, incorporating a linear variation of enhanced strength with distance from the geogrid plane. This was shown to produce reasonably accurate simulations of triaxial compression tests of both stabilized and nonstabilized specimens at all the confining stresses tested with one set of input parameters for the failure envelope and its variation with distance from the geogrid plane.

Sign in / Sign up

Export Citation Format

Share Document