scholarly journals Use of the relative indicator for estimation of railway blocks capacity

2018 ◽  
Vol 216 ◽  
pp. 02007
Author(s):  
Sergei Bessonenko ◽  
Ekaterina Klimova ◽  
Aleksei Dementyev

Capacity of railway blocks and sections is one of the most important parameters of railway transport operation. The purpose of the study is to find a universal parameter of railway blocks and sections capacity that would allow maximum use of the reserves available. This paper proposes to use “partial capacity filling factors”, which are defined as the ratio of the changed capacity factor to the existing value, as a relative indicator. The methodology of application of this indicator has been elaborated, examples of calculations have been provided. There are nomograms in the paper that allow determining the maximum number of trains that can be passed through the section taking into consideration all conditions of operation.

2020 ◽  
Vol 11 (8) ◽  
pp. 762
Author(s):  
Inna Kuznetsova ◽  
Yuliia Karpenko ◽  
Iryna Vidomenko

The article deals with the main problems of port elevators, which lead to incomplete use of their capacities. They include: the problem of reducing the capacity factor of the elevator capacity, the problem of lack of rhythm of grain picking operations, the problem of inconsistency with railway transport, the problem of storage of different crops and crops of different quality, the problem of loss of time during the shipment of grain to the ship. The necessity of detailed planning of port elevators' operations by the determination of flows of work passing through the system, as well as the control of their implementation, is proved. The graphical model of implementation of the operational function of the port elevator is suggested, which will allow to coordinate its operations and to check the possibility of their implementation during the departure period of the ship. This model establishes the order of operations, as well as the main planning documents that regulate them. The use of a technological map of the implementation of the operational function for describing the list and sequence of basic operations for the formation of a ship batch and its shipment, conditions and requirements for their implementation, as well as information about the equipment used, is suggested. The graphical model and the technological map of the implementation of the port elevator's operational function provide information on the rational sequence and coherence of the operations' planning for the formation of the ship party and its shipment, which reduces the time loss, provides the opportunity to coordinate the work of the elevator with its transportation system.


2020 ◽  
Vol 20 (2) ◽  
pp. 7-13
Author(s):  
G. Stankevych ◽  
L. Dmytrenko ◽  
A. Kats ◽  
V. Shpak

In the future, in Ukraine it is planned to increase the sown area for cereals, legumes and oilseeds, to increase the gross grain harvest to 80 million tons, and its export abroad was increased twice. Intensive construction in the southern ports of Ukraine of grain transshipment terminals with large metal silos will solve the problem of increasing grain export in the future. At these powerful terminals, the bulk of the grain comes mainly by rail, and is shipped to water. The aim of the work was to study the characteristics of the grain receiving from railway transport to the grain transshipment terminal of LLC “Ukrelevatorprom” in order to improve its works efficiency. The object of the study was the development of technology of grain receiving at the grain transshipment terminal; the subject of research is cereals, legume sand oil crops, as well as data from daily volumes of receiving and dispensing operations at the grain transshipment terminal of LLC “Ukrelevatorprom” for 2015-2016. The studies were carried out on the basis of processing data from the consignment notes for 2015-2016, according to which there was a summed amount of grain (net) daily transported by the railway. Further processing of the obtained data was carried out by a combined graphoanalytical method, for which, on the basis of tabular values for each studied year, the corresponding histograms and graphs were built and the necessary indicators were determined. Analysis of the structure of grain crops supplied by railway to LLC “Ukrelevatorprom” in 2015 and 2016 and their ratio showed that the main share was occupied by cereal crops (78.0 % and 73.1 % respectively), which were mainly represented by corn, share which was significantly dominated by other crops (wheat of various classes and barley) and amounted to 45.8 % and 44.5 %, respectively, which can be explained by its high demand in the international grain market, in which Ukraine occupies a leading position. Oilseeds (rapeseed) were taken in accordance with 19.1 % and 14.9 %, and legumes (soybeans) — 2.9 % and 12.0 %. An analysis of the timing of the unloading of grain wagons (hopper cars) showed that the total duration of this process, depending on the crops, averages 37...59 minutes. The longest steps for unloading wagons are to determine the grain quality indicators, especially rapeseed, and to spill grain from the wagons, therefore, to reduce their duration, it is necessary to form feeds of wagons with grain batches of the same quality and use more modern express analyzers to determine grain quality indicators, which will increase the productivity of the grain receiving line from the railway. According to the research results, the enterprise has the potential to increase by about 30 % the volume of grain intake. It was established that the periods of the grain receipt at the enterprise in 2015-2016 amounted to 349 and 353 days, respectively, the actual coefficients of the daily irregularity Kdaily for the grain receipt from the railway in these years are equal to 1.47 and 1.52, and the monthly irregularity Kmonth, respectively 1.33 and 1.21, does not exceed the standard values Kdaily = 2.5 and Kmonth= 2.0. This made it possible to clarify the database from the actual characteristics of the process of grain receiving by railway and can be used in design and verification calculations of equipment in technological lines for receiving grain from railway transport, and will contribute to increasing the efficiency of grain transshipment terminals. 


2015 ◽  
Vol 0 (9) ◽  
Author(s):  
L. A. Shilo ◽  
O. M. Tymoshchenko
Keyword(s):  

2016 ◽  
Vol 1 (1) ◽  
pp. 165-168
Author(s):  
O. R. Korzenevska ◽  
◽  
O.V. Severynovska
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document