scholarly journals Experimental investigation of the heat exchange intensity

2018 ◽  
Vol 245 ◽  
pp. 07002 ◽  
Author(s):  
Vladimir Davletbaev ◽  
Natalia Rydalina ◽  
Elena Antonova
Keyword(s):  
Experimental Investigation ◽  
Heat Exchange ◽  
Heat Exchangers ◽  
Exchange Process ◽  
Porous Metal ◽  
Experimental Setup ◽  
Working Medium ◽  
Refrigeration Unit ◽  
Heat Exchange Process ◽  
Exchange Intensity

We study heat exchangers at the experimental setup aiming at the energy-saving. The feature of this heat exchange process is of the fact that the working medium is a porous metal. The pores are filled with freon and operation of the refrigeration unit condenser is studied. The scheme of the experimental setup and experiment methodology are given. The results of the experiment and its processing are also presented.

scholarly journals Computational parametric study on efficiency of low boiling point fluid plants under heat exchange process intensification

2021 ◽  
Vol 289 ◽  
pp. 06003
Author(s):  
Alena Likhaeva ◽  
Sergey Grigoriev ◽  
Evgeniy Trushin ◽  
Marat Dasaev
Keyword(s):  
Heat Exchange ◽  
Parametric Study ◽  
Boiling Point ◽  
Heat Exchangers ◽  
Exchange Process ◽  
Electricity Consumption ◽  
Process Intensification ◽  
Exchange Processes ◽  
Heat Exchange Equipment ◽  
Heat Exchange Process

One of the main challenges for the energy industry is to improve the reliability and efficiency of heat exchange equipment in heating plants. Phase-change heat exchangers with low boiling point fluid (LBPF) are widely used in both conventional and renewable energy. The main objectives of increasing the efficiency of heat exchange equipment are to reduce the weight and dimensions, to increase the amount of heat transferred and to reduce the electricity consumption spent on pumping the heat transfer agent. These objectives are achieved by implementing various methods of heat exchange intensification in heat exchange equipment. A key aspect concerning application of various types of heat exchange intensifiers in heat exchange equipment is evaluation of possibility to increase their design efficiency. The paper presents the results of a computational parametric study of changes in efficiency of some LBPF-based plants when intensifying heat exchange processes by modifying functional surfaces of heat exchangers by laser ablation.

Intensification of a Heat Exchange Process in Mixing and Surface Heat Exchangers

2018 ◽  
Vol 12 (3) ◽  
pp. 279
Author(s):  
Daulet Koshkarovich Zhumadullayev ◽  
Alexandr Anatolievich Volnenko ◽  
Didar Sarsenbekuly ◽  
Abilda Abdykadyrovich Yeshzhanov
Keyword(s):  
Heat Exchange ◽  
Heat Exchangers ◽  
Exchange Process ◽  
Surface Heat ◽  
Heat Exchange Process

scholarly journals Mathematical modeling of non-steady heat exchange process in cryogenic coil-wound heat exchangers

2020 ◽  
Vol 324 ◽  
pp. 01009
Author(s):  
Aleksandr A. Vorob’ev ◽  
Dmitriy P. Posanchukov ◽  
Aleksandr A. Kozlov ◽  
Aleksey V. Ivanov
Keyword(s):  
Heat Exchanger ◽  
Heat Exchange ◽  
Heat Exchangers ◽  
Exchange Process ◽  
Air Separation ◽  
Separation Unit ◽  
Finned Tubes ◽  
Air Separation Unit ◽  
Heat Exchange Process ◽  
Steady Heat

The paper discusses a dynamic model of coil-wound heat exchanger and its implementation in the MathWorks SimulinkTM computer simulation system. As a simulation object was chosen a coil-wound heat exchanger with wire-finned tubes of a commercial low-capacity air separation unit. The methods for obtaining experimental data has been described, the non-steady heat exchange process has been simulated, and the obtained results have been analyzed.

Research and Develop on Series of Cryogenic Liquid Nitrogen Coil-Wound Heat Exchanger

2014 ◽  
Vol 1070-1072 ◽  
pp. 1817-1822
Author(s):  
Zhou Wei Zhang ◽  
Ya Hong Wang ◽  
Jia Xing Xue
Keyword(s):  
Heat Exchanger ◽  
Heat Exchange ◽  
Liquid Nitrogen ◽  
Heat Exchangers ◽  
Exchange Process ◽  
Cryogenic Liquid ◽  
Gas Purification ◽  
Important Research ◽  
Research Directions ◽  
Heat Exchange Process

The research and development situation of liquid nitrogen coil-wound heat exchanger were discussed in view of heat exchange in gas purification field in petrol-chemical industry. The basic designing methods and the multi-stream heat exchange process were illustrated by the cryogenic and high pressure crossing heat exchange equipments of liquid nitrogen coil-wound heat exchanger with multi-stream and multiphase flow, including Three-stream back-cooling heat exchangerin first stage, Four-stream back-cooling heat exchangerin second stage, Five-stream back-cooling heat exchangerin third stage, Multi-stream main back-coolingcoil-wound heat exchanger etc. A series of coil-wound heat exchangers with different mixed fluids and different applications were described. The winding structure characteristics and the work principles of the spiral pipe bundles were elaborated to give references for the scientific design and calculation of coil-wound heat exchanger in cryogenic field. The important research directions and the critical scientific problems were forecasted.

COMPUTER SIMULATION OF FLOW IN CORRUGATED CHANNEL OF PLATE HEAT EXCHANGER

2020 ◽  
pp. 51-58
Author(s):  
Л. А. Кущев ◽  
В. Н. Мелькумов ◽  
Н. Ю. Саввин
Keyword(s):  
Computer Simulation ◽  
Heat Exchanger ◽  
Heat Exchange ◽  
High Speed ◽  
Exchange Process ◽  
Plate Heat Exchanger ◽  
System Stability ◽  
Plate Heat ◽  
Corrugated Channel ◽  
Heat Exchange Process

Постановка задачи. Рассматривается теплообменный процесс, протекающий в модифицированном гофрированном межпластинном канале интенсифицированного пластинчатого теплообменного аппарата с повышенной турбулизацией теплоносителя. Необходимо разработать компьютерную модель движения теплоносителя в диапазоне скоростей 0,1-1,5 м/с и определить коэффициент турбулизации пластинчатого теплообменника. Результаты. Приведены результаты компьютерного моделирования движения теплоносителя в межпластинном гофрированном канале оригинального пластинчатого теплообменного аппарата с помощью программного комплекса Аnsys . Определены критерии устойчивости системы. Выполнено 3 D -моделирование канала, образуемого гофрированными пластинами. При исследовании процесса турбулизации были рассмотрены несколько скоростных режимов движения теплоносителя. Определен коэффициент турбулизации Tu, %. Выводы. В результате компьютерного моделирования установлено увеличение коэффициента теплопередачи К, Вт/(м ℃ ) за счет повышенной турбулизации потока, что приводит к снижению металлоемкости и уменьшению стоимости теплообменного оборудования. Statement of the problem. The heat exchange process occurring in a modified corrugated interplate channel of an intensified plate heat exchanger with an increased turbulence of the heat carrier is discussed. A computer model of the coolant movement in the speed range of 0.1-1.5 m/s is developed and the turbulence coefficient of the plate heat exchanger is determined. Results. The article presents the results of computer modeling of the coolant movement in the interplate corrugated channel of the original plate heat exchanger using the Ansys software package. The criteria of system stability are defined. 3D modeling of the channel formed by corrugated plates is performed. In the study of the process of turbulence several high-speed modes of movement of the coolant were considered. The turbulence coefficient Tu, % is determined. Conclusions. As a result of computer simulation, an increase in the heat transfer coefficient K, W/(m ℃) was found due to an increased turbulization of the flow, which leads to a decrease in metal consumption and a decrease in the cost of heat exchange equipment.

scholarly journals Numerical analysis of heat exchange process in the biomass carbonisation reactor

2019 ◽  
Vol 252 ◽  
pp. 05019 ◽  
Author(s):  
Robert Zarzycki ◽  
Justyna Jędras
Keyword(s):  
Heat Transfer ◽  
Heat Exchange ◽  
Numerical Analysis ◽  
Exchange Process ◽  
Geometrical Model ◽  
Heating Time ◽  
Heating Process ◽  
Hot Air ◽  
Cyclic Operation ◽  
Heat Exchange Process

The study presents the problem of heat exchange in the biomass carbonisation reactor with cyclic operation. Based on the actual parameter of the biomass carbonisation reactor, a geometrical model was developed, and the computation of the heating process was conducted for two cases: an empty reactor and a filled reactor. Its result demonstrated that for the analysed configuration of the reactor, the process of heating biomass in the containers is limited by the capability of heat transfer to the biomass in the container. The results suggest opportunities for the improved heat exchange in the reactor and, accordingly, shortening heating time through installation of the system that forces circulation of hot air inside the reactor.

scholarly journals Heat exchange process intensification in solar collectors

2019 ◽  
Vol 698 ◽  
pp. 055027
Author(s):  
A P Pirozhnikova ◽  
M A Govorunov ◽  
T L Pirozhnikova ◽  
G E Muro
Keyword(s):  
Heat Exchange ◽  
Exchange Process ◽  
Process Intensification ◽  
Solar Collectors ◽  
Heat Exchange Process
Sign in / Sign up

Export Citation Format

Share Document