scholarly journals Research on the estimation method of the point-of-interest (POI) displacement for ultra-precision flexible motion system based on functional optical fiber sensor

2021 ◽  
Vol 22 ◽  
pp. 48
Author(s):  
Yujie Li ◽  
Ming Zhang ◽  
Yu Zhu
Keyword(s):  
Optical Fiber ◽  
Optical Fiber Sensor ◽  
Estimation Method ◽  
Fiber Optic Sensor ◽  
Fiber Sensor ◽  
Optic Fiber ◽  
Estimation Model ◽  
Fiber Sensors ◽  
Optimal Position ◽  
Displacement Estimation

This paper proposes a POI displacement estimation method based on the functional optical fiber sensor and the phase modulation principle to improve the POI displacement estimation accuracy. First, the relation between the object deformation and the optic fiber lightwave phase is explained; the measurement principle of functional optical fiber sensor based on the heterodyne interference principle and its layout optimization method is proposed, and a POI displacement estimation model is presented based on the data approach. Secondly, a beam is taken as the simulation object, the optimal position and length of the optical fiber sensor are determined based on its simulation data. Finally, the experimental device is designed to verify the effectiveness of the POI displacement estimation method based on the optic fiber sensors. The frequency-domain plot of the signals shows that the optical fiber sensors can express the flexible deformation of the analyzed object well. The POI displacement estimation model with the fiber optic sensor signals as one of the inputs is constructed. Through estimating the test data, the error using the optical fiber sensor-based POI displacement estimation method proposed in this paper reduces by more than 61% compared to the rigid body-based assumption estimation method.

A Multiplexed Optical Fiber Sensor System For Distributed Measurement Of Structural Strains

1997 ◽  
Vol 503 ◽  
Author(s):  
F. Ansari ◽  
Z. Chen ◽  
Q. Li
Keyword(s):  
Optical Fiber ◽  
Optical Switch ◽  
Optical Fiber Sensor ◽  
Fiber Material ◽  
Smart Structure ◽  
Sensor System ◽  
Fiber Sensor ◽  
Fiber Sensors ◽  
Large Structures ◽  
Distributed Measurement

ABSTRACTStructurally integrated optical fiber sensors form the basis for smart structure technology. Over the past decade a variety of sensor configurations have been developed for measurement of strains and deformations in structures. Strains and deformations alter the refractive index and the geometry of the optical fiber material. These changes perturb the intensity, phase, and polarization of the light-wave propagating along the probing fiber. The optical perturbations are detected for the determination of strain. The research presented here describes the development of a new optical fiber sensor system for measurement of structural strains based on white light interferometry. An optical switch provides for multiplexing of strain signals from various locations in the structure. Redundant Bragg grating type fiber optic sensors as well as strain gauges were employed for comparison and verification of strain signals as measured by the new system. The system provides capability for distributed sensing of strains in large structures.

Strain Analysis of Surface Bonded Optical Fiber Sensors

2011 ◽  
Vol 121-126 ◽  
pp. 4166-4170
Author(s):  
Shiuh Chuan Her ◽  
Chang Yu Tsai
Keyword(s):  
Optical Fiber ◽  
Electromagnetic Interference ◽  
Optical Fiber Sensor ◽  
Strain Analysis ◽  
Adhesive Layer ◽  
Optical Fiber Sensors ◽  
Fiber Sensor ◽  
Fiber Sensors ◽  
Theoretical Predictions ◽  
Host Structure

Optical fiber sensors with light weight, small size and immunity to electromagnetic interference have been found to be a promising device for use in the development of smart structures. It is well known that the strain transfer from the host structure to the optical fiber sensor is dependent on the bonding characteristics such as adhesive layer and bonded length. In this investigation, the optical fiber sensor is surface bonded on the host structure. A theoretical model consisting of the optical fiber, adhesive layer and host material, is proposed to determine the strain in the optical fiber sensor induced by the host structure. The theoretical predictions were validated with the numerical analysis using the finite element method.

Strain Analysis of an Embedded Optical Fiber Sensor

2011 ◽  
Vol 467-469 ◽  
pp. 279-282
Author(s):  
Shiuh Chuan Her ◽  
Chang Yu Tsai
Keyword(s):  
Optical Fiber ◽  
Electromagnetic Interference ◽  
Optical Fiber Sensor ◽  
Strain Analysis ◽  
Adhesive Layer ◽  
Small Dimension ◽  
Host Material ◽  
Fiber Sensor ◽  
Fiber Sensors ◽  
Theoretical Predictions

Optical fiber sensors with light weight, small dimension and immunity to electromagnetic interference are widely used in structural health monitoring device. In this investigation, a theoretical model of the strain transferred from the host material to the embedded optical fiber is developed to reveal the differential strains between the optical fiber sensor and host material. The theoretical predictions are validated with the numerical analysis using the finite element method. The percentage of strain in the host material actually transferred to the optical fiber is dependent on the bonding characteristics such as adhesive layer, protective coating and host material. Parametric study shows that the larger of the host material the more strain is transferred to the optical fiber.

An Optical Fiber Sensor for Measuring Light Absorption in Suspension Solutions

2011 ◽  
Vol 121-126 ◽  
pp. 2509-2513
Author(s):  
Fei Bing Xiong ◽  
N Djeu ◽  
Wen Zhang Zhu
Keyword(s):  
Optical Fiber ◽  
Glassy Carbon ◽  
Fiber Optic ◽  
Optical Fiber Sensor ◽  
Fiber Optic Sensor ◽  
Fiber Sensor ◽  
Graphite Flake ◽  
Chemical Information ◽  
Carbon Particles ◽  
Optic Sensor

An optical fiber sensor based on attenuated total reflectance (ATR) for extraction chemical information from highly scattering turbid materials has been evaluated. The influence of particles on bulk absorption and ATR transmitted spectra of micron-sized graphite flakes and spherical glassy carbon suspensions were investigated. The ATR transmitted spectra of coiled fiber-optic sensor in those suspensions with various concentrations are insensitive to scattering of suspended particles, especially for graphite flake suspensions. The reason for different influence of graphite flakes and spherical glassy carbon particles suspensions on e ATR spectra analyzed. This study demonstrates that fiber-optic sensor based on ATR technique is a feasible technique in application for monitoring turbid suspensions.

A source number estimation method for single optical fiber sensor

2015 ◽  
Author(s):  
Junpeng Hu ◽  
Zhiping Huang ◽  
Shaojing Su ◽  
Yimeng Zhang ◽  
Chunwu Liu
Keyword(s):  
Optical Fiber ◽  
Optical Fiber Sensor ◽  
Estimation Method ◽  
Fiber Sensor ◽  
Source Number Estimation ◽  
Source Number

Development of Smart Composite Panel with Optical Fiber Sensors

2005 ◽  
Vol 297-300 ◽  
pp. 659-664
Author(s):  
Hideaki Murayama ◽  
Kazuro Kageyama ◽  
Isamu Ohsawa ◽  
Makoto Kanai ◽  
Kiyhoshi Uzawa ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Composite Structures ◽  
Optical Fiber Sensor ◽  
Optical Fiber Sensors ◽  
Vibration Sensor ◽  
Composite Panel ◽  
Fiber Sensor ◽  
Smart Composite ◽  
Fiber Sensors ◽  
Distributed Sensors

We have developed a novel fiber-optic vibration sensors and applied commercially available strain and temperature sensors to health monitoring of composite structures. In this study, we constructed an optical fiber network integrating four types of optical fiber sensor into a carbon reinforced plastic (CFRP) panel. These four sensors were the vibration sensor developed by our laboratory, two distributed sensors based on Brillouin and Raman backscattering and Fiber Bragg Grating (FBG) sensors. By dealing the data obtained from the measurement systems corresponding to these four sensors, strain/stress and temperature distributions throughout the panel can be monitored. Vibration and elastic waves transmitting on the panel are also detected at several sensing points. Furthermore, we will be able to determine damage locations and modes by processing the wave signals. To make the panel with the optical fiber sensor network more sensitive and smarter, we are developing some techniques that can improve the performance of the sensors and can assess the structural integrity by analyzing measurement results. In this paper, the development of the first generation of our smart composite panel with the optical fiber sensors is described and the techniques making the panel more sensitive and smarter are also described.

scholarly journals An IoT-Based Water Level Detection System Enabling Fuzzy Logic Control and Optical Fiber Sensor

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Yani Zheng ◽  
Gaurav Dhiman ◽  
Ashutosh Sharma ◽  
Amit Sharma ◽  
Mohd Asif Shah
Keyword(s):  
Fuzzy Logic ◽  
Optical Fiber ◽  
Wireless Sensors ◽  
Control Algorithm ◽  
Detection System ◽  
Optical Fiber Sensor ◽  
Fiber Sensor ◽  
Network Congestion ◽  
Fiber Sensors ◽  
Congestion Control Algorithm

The usage of wireless sensors has become widespread for the collection of data for various Internet of Things (IoT) products. Specific wireless sensors use optical fiber technology as transmission media and lightwave signals as carriers, showing the advantages of antielectromagnetic interference, high sensitivity, and strong reliability. Hence, their application in IoT systems becomes a research hotspot. In this article, multiple optical fiber sensors are constructed as an IoT detection system, and a Transmission Control Protocol (TCP)/Internet Protocol (IP) communication stack is used for the sensor module. Furthermore, design of gateway module, data server, and monitoring module is established in order to run the data server in the Windows system and communicate across the network segments. Furthermore, the optical fiber sensor is connected to the development board with WiFi, meanwhile considering the optical fiber wireless network’s congestion problem. The fuzzy logic concept is introduced from the perspective of cache occupancy, and a fiber sensor’s network congestion control algorithm is proposed. In the experiment, the IoT detection system with multiple optical fiber sensors is used for water level detection, and the sensor’s real-time data detected by the User Interface (UI) are consistent with the feedback results. The proposed method is also compared with the SenTCP algorithm and the CODA algorithm, and it was observed that the proposed network congestion control algorithm based on the fuzzy logic can improve network throughput and reduce the network data packet loss.

An Evanescent Fiber Sensor for Detecting Low-Level Content H2O in D2O Solutions

2013 ◽  
Vol 303-306 ◽  
pp. 59-62 ◽  
Author(s):  
Fei Bing Xiong ◽  
Wen Zhang Zhu ◽  
Hai Feng Lin
Keyword(s):  
Optical Fiber ◽  
Absorption Spectroscopy ◽  
Deuterium Oxide ◽  
Optical Fiber Sensor ◽  
Least Square ◽  
Fiber Optic Sensor ◽  
Fiber Sensor ◽  
Infrared Range ◽  
Calibration Model ◽  
Low Level

An optical fiber sensor based evanescent absorption spectroscopy in the infrared range for the quantitative determination of H2O content in D2O has been evaluated. The coiled optical fiber sensor base on evanescent absorption spectroscopy has been investigated to monitor H2O concentration in D2O. The classical least square model has been utilized to build the calibration model and predict the H2O concentrations. The predicted H2O concentration in D2O is acceptably accurate and susceptible. The work demonstrates that the coiled fiber-optic sensor based on evanescent absorption spectroscopy is a feasible analytical technique for prediction of the low-level H2O content during deuterium oxide distillation in on-line and remote situation

A Long Cylindrical Optical Fiber Sensor Based on Multiple Total Internal Reflections in Heterodyne Interferometry

2014 ◽  
Vol 530-531 ◽  
pp. 3-6
Author(s):  
Shinn Fwu Wang ◽  
Ming Jen Wang ◽  
Jyh Shyan Chiu
Keyword(s):  
Refractive Index ◽  
Phase Shift ◽  
Optical Fiber ◽  
Optical Fiber Sensor ◽  
High Sensitivity ◽  
Fiber Sensor ◽  
Heterodyne Interferometry ◽  
Fiber Sensors ◽  
Biochemical Sensing ◽  
Real Time Measurement

In this paper, a long cylindrical multimode optical fiber sensor (OFS) based on multiple total internal reflections in heterodyne interferometry is proposed. The cladding of the sensing portions of the fiber sensors is removed, but dont be coated with any metal films. With the OFS the phase shift difference due to the multiple total internal reflections (MTIRs) effect between the p-and s-polarizations can be measured by using the heterodyne interferometry. Substituting the phase shift difference into Fresnels equations, the refractive index for the tested medium can be calculated. According to numerical simulations and experimental results, the long cylindrical OFS is with the best resolution of 0.0000028 refractive index unit (RIU). However, the OFS could be valuable for chemical, biological and biochemical sensing. It has some merits, such as, high sensitivity, high resolution, stability, small size and in real-time measurement.

scholarly journals Displacement Sensing of an Active String Actuator by an Optical Fiber

2021 ◽  
Vol 10 (1) ◽  
pp. 35
Author(s):  
Weihang Tian ◽  
Shuichi Wakimoto ◽  
Kazuya Nagaoka ◽  
Yorifumi Yoshimoto ◽  
Takefumi Kanda ◽  
...  
Keyword(s):  
Optical Fiber ◽  
Optical Fiber Sensor ◽  
Fiber Sensor ◽  
Radius Of Curvature ◽  
Artificial Muscles ◽  
Rigid Displacement ◽  
Displacement Estimation ◽  
Displacement Sensors ◽  
Bending Loss ◽  
Displacement Force

We have fabricated a string-shaped actuator called “Active string” that has high contractile displacement/force by accumulating thin pneumatic artificial muscles using the string production process. However, displacement control of the active string is challenging because general bulky and rigid displacement sensors are not suitable for the sensor element of the active string. Therefore, in this report, a flexible optical fiber sensor is combined with the active string to enable sensing of its displacement. As the active string contracts, the radius of curvature of the optical fiber decreases, and light intensity propagating in the optical fiber decreases due to bending loss. The experimental results showed that the optical fiber sensor value changed with corresponding to the displacement of the active string. It shows the possibility that it is possible to make a displacement estimation of the displacement of the active string using an optical fiber sensor.

Sign in / Sign up

Export Citation Format

Share Document