scholarly journals Metacarpal Bony Dimensions Related to Headless Compression Screw Sizes

2019 ◽  
Vol 12 (S 01) ◽  
pp. S39-S44
Author(s):  
Michael Okoli ◽  
Kevin Lutsky ◽  
Michael Rivlin ◽  
Brian Katt ◽  
Pedro Beredjiklian
Keyword(s):  
Computed Tomography ◽  
Fracture Fixation ◽  
Ct Scans ◽  
Compression Screw ◽  
Metacarpal Head ◽  
Headless Compression Screw ◽  
Metacarpal Bones ◽  
Headless Compression Screws ◽  
The Mean ◽  
Distal Aspect

Abstract Introduction The purpose of this study is to determine the radiographic dimensions of the finger metacarpals and to compare these measurements with headless compression screws commonly used for fracture fixation. Materials and Methods We analyzed computed tomography (CT) scans of the index, long, ring, and small metacarpal bones and measured the metacarpal length, distance from the isthmus to the metacarpal head, and intramedullary diameter of the isthmus. Metacarpals with previous fractures or hardware were excluded. We compared these dimensions with the size of several commercially available headless screws used for intramedullary fixation. Results A total of 223 metacarpals from 57 patients were analyzed. The index metacarpal was the longest, averaging 67.6 mm in length. The mean distance from the most distal aspect of the metacarpal head to the isthmus was 40.3, 39.5, 34.4, and 31 mm for the index, long, ring, and small metacarpals, respectively. The narrowest diameter of the isthmus was a mean of 2.6, 2.7, 2.3, and 3 mm for the index, long, ring, and small metacarpals, respectively. Of 33 commercially available screws, only 27% percent reached the isthmus of the index metacarpal followed by 42, 48, and 58% in the long, ring, and small metacarpals, respectively. Conclusion The index and long metacarpals are at a particular risk of screw mismatch given their relatively long lengths and narrow isthmus diameters.

Trans-metacarpal Screw Fixation for Extra-articular Proximal Phalangeal Base Fractures

2017 ◽  
Vol 22 (01) ◽  
pp. 35-38 ◽  
Author(s):  
Eichi Itadera ◽  
Takahiro Yamazaki
Keyword(s):  
Screw Fixation ◽  
Proximal Phalanx ◽  
Metacarpophalangeal Joint ◽  
Fixation Method ◽  
Compression Screw ◽  
Metacarpal Head ◽  
Headless Compression Screw ◽  
Articular Fractures ◽  
Intramedullary Canal ◽  
Cannulated Drill

We developed a new internal fixation method for extra-articular fractures at the base of the proximal phalanx using a headless compression screw to achieve rigid fracture fixation through a relatively easy technique. With the metacarpophalangeal joint of the involved finger flexed, a smooth guide-pin is inserted into the intramedullary canal of the proximal phalanx through the metacarpal head and metacarpophalangeal joint. Insertion tunnels are made over the guide-pin using a cannulated drill. Then, a headless cannulated screw is placed into the proximal phalanx. All of five fractures treated by this procedure obtained satisfactory results.

Single Versus Dual Headless Compression Screw Fixation of Scaphoid Nonunions: A Biomechanical Comparison

Hand ◽  
2021 ◽  
pp. 155894472097411
Author(s):  
Luke T. Nicholson ◽  
Kristen M. Sochol ◽  
Ali Azad ◽  
Ram Kiran Alluri ◽  
J. Ryan Hill ◽  
...  
Keyword(s):  
Screw Fixation ◽  
Qualitative Assessment ◽  
Secondary Outcome ◽  
Scaphoid Nonunion ◽  
Compression Screw ◽  
Single Screw ◽  
Headless Compression Screw ◽  
Significant Difference ◽  
Load To Failure ◽  
Headless Compression Screws

Background: Management of scaphoid nonunions with bone loss varies substantially. Commonly, internal fixation consists of a single headless compression screw. Recently, some authors have reported on the theoretical benefits of dual-screw fixation. We hypothesized that using 2 headless compression screws would impart improved stiffness over a single-screw construct. Methods: Using a cadaveric model, we compared biomechanical characteristics of a single tapered 3.5- to 3.6-mm headless compression screw with 2 tapered 2.5- to 2.8-mm headless compression screws in a scaphoid waist nonunion model. The primary outcome measurement was construct stiffness. Secondary outcome measurements included load at 1 and 2 mm of displacement, load to failure for each specimen, and qualitative assessment of mode of failure. Results: Stiffness during load to failure was not significantly different between single- and double-screw configurations ( P = .8). Load to failure demonstrated no statistically significant difference between single- and double-screw configurations. Using a qualitative assessment, the double-screw construct maintained rotational stability more than the single-screw construct ( P = .029). Conclusions: Single- and double-screw fixation constructs in a cadaveric scaphoid nonunion model demonstrate similar construct stiffness, load to failure, and load to 1- and 2-mm displacement. Modes of failure may differ between constructs and represent an area for further study. The theoretical benefit of dual-screw fixation should be weighed against the morphologic limitations to placing 2 screws in a scaphoid nonunion.

scholarly journals Low Rate of Complications Following Intramedullary Headless Compression Screw Fixation of Metacarpal Fractures

Hand ◽  
2019 ◽  
Vol 15 (6) ◽  
pp. 798-804 ◽  
Author(s):  
William J. Warrender ◽  
David E. Ruchelsman ◽  
Michael G. Livesey ◽  
Chaitanya S. Mudgal ◽  
Michael Rivlin
Keyword(s):  
Screw Fixation ◽  
Case Series ◽  
Compression Screw ◽  
Nickel Allergy ◽  
Hardware Failure ◽  
Metacarpal Fractures ◽  
Headless Compression Screw ◽  
Clinical Complications ◽  
Headless Compression Screws ◽  
Low Incidence

Background: There has been a recent increase in the use of headless compression screws for fixation of metacarpal neck and shaft fractures as they offer several advantages, and minimal complications have been reported. This study aimed to evaluate the clinical complications and their solutions following retrograde intramedullary headless compression screw fixation of metacarpal fractures. We describe complications and the approach to their management. Methods: We performed a multicenter case series through retrospective review of all patients treated with intramedullary headless screw fixation of metacarpal fractures by 3 fellowship-trained hand surgeons. Patient demographics, implant used, type of complication, pre- and postoperative radiographs, operative reports, and sequelae were reviewed for each case. We defined complications as infection, loss of fixation, hardware failure, malrotation, nonunion, malunion, metal allergy, and any repeat surgical intervention. Results: Four complications (2.5%) were identified through the review of 160 total metacarpal fractures. One complication was a nickel allergy, one was a broken screw after repeat trauma, and 2 patients had bent intramedullary screws. Screw removal in 3 patients was simple and without complications or persistent limitations. One bent screw with a refracture was left in place. No serious complications were seen. Conclusion: Intramedullary screw fixation of metacarpal fractures is safe with a low incidence of complications (2.5%) that can be safely and effectively managed.

Headless Compression Screw Fixation of Jones Fractures

2012 ◽  
Vol 40 (11) ◽  
pp. 2578-2582 ◽  
Author(s):  
Masashi Nagao ◽  
Yoshitomo Saita ◽  
So Kameda ◽  
Hiroaki Seto ◽  
Ryo Sadatsuki ◽  
...  
Keyword(s):  
Screw Fixation ◽  
Insertion Site ◽  
Autogenous Bone ◽  
Compression Screw ◽  
Screw Insertion ◽  
Headless Compression Screw ◽  
Full Activity ◽  
Competitive Athletes ◽  
The Mean ◽  
Mean Time

Background: Internal fixation is advocated as the primary treatment for fifth metatarsal Jones fractures in athletes; however, screw insertion site discomfort and refracture can occur especially in competitive athletes. The ideal implant has not been determined. Hypothesis: Headless compression screw fixation of proximal fifth metatarsal Jones fractures is an effective treatment approach especially in competitive athletes. Study Design: Case series; Evidence level, 4. Methods: We studied 60 athletes treated surgically with a headless compression screw for fifth metatarsal Jones fractures (mean age, 19 years). The mean follow-up time was 178 weeks. We evaluated the clinical and radiographic outcomes of headless compression screw fixation of Jones fractures. Results: All athletes returned to full activity. The mean time to start running after surgery was 6.3 weeks (range, 3-12.7 weeks), and the mean time to full activity after surgery was 11.2 weeks (range, 6-25 weeks). One athlete suffered a delayed union, which healed uneventfully. One athlete suffered a nonunion and underwent reoperation for a screw exchange to an autogenous bone graft harvested from the iliac crest. No screw breakage was reported. No athlete suffered a refracture or discomfort in the screw insertion site. Conclusion: Headless compression screw fixation of fifth metatarsal Jones fractures provided excellent results, allowing athletes to return to full activity without both screw insertion site irritation and clinical refracture.

Early results of a new implant: 3.0 mm headless compression screw for scaphoid fracture fixation

2012 ◽  
Vol 37 (7) ◽  
pp. 690-693 ◽  
Author(s):  
K. Singisetti ◽  
E. Aldlyami ◽  
A. Middleton
Keyword(s):  
Internal Fixation ◽  
Fracture Fixation ◽  
Scaphoid Fracture ◽  
Compression Screw ◽  
Headless Compression Screw ◽  
Scaphoid Fractures ◽  
Early Results ◽  
Fracture Nonunions ◽  
Radiological Healing ◽  
Vascularized Bone

There has been a considerable evolution of screws used for internal fixation of scaphoid fractures. We discuss here, early results of a recently introduced implant Synthes 3.0 mm headless compression screw used for scaphoid fracture fixation. Twenty eight patients with scaphoid fractures (five acute and 23 nonunions) were treated with internal fixation by this non-variable pitch screw over a period of 18 months. All nonunions had pedicle vascularized bone grafting. All five patients with acute scaphoid fracture fixation had radiological healing at a mean of 8 weeks. Fifteen of 23 scaphoid fracture nonunions showed definite signs and a further seven showed probable signs of radiological healing at a mean of 8 months. One nonunion has failed to unite after surgery.

Treatment of proximal phalangeal fractures with an antegrade intramedullary screw: a cadaver study

2016 ◽  
Vol 41 (7) ◽  
pp. 683-687 ◽  
Author(s):  
P. Borbas ◽  
M. Dreu ◽  
A. Poggetti ◽  
M. Calcagni ◽  
T. Giesen
Keyword(s):  
Articular Surface ◽  
Proximal Phalanx ◽  
Metacarpophalangeal Joint ◽  
Cadaver Study ◽  
Compression Screw ◽  
Headless Compression Screw ◽  
Headless Compression Screws ◽  
Average Defect ◽  
Phalangeal Fractures ◽  
Intramedullary Screw

The aim of this study was to quantify the articular cartilage defect created with two different antegrade techniques of intramedullary osteosynthesis with a headless compression screw inserted through the metacarpophalangeal joint. In 12 out of 24 fingers from six cadaveric hands, a trans-articular technique with cannulated headless compression screws (2.2 and 3.0 mm diameter) was used; whereas in the other 12 fingers, an intra-articular fixation technique was used. The areas of the articular surface and the defects created were measured with a digital image software program. All measurements were made twice by two observers. In the intra-articular technique, the average defect in the base of the articular surface of the proximal phalanx was 4.6% with the 2.2 mm headless compression screw and 8.5% with the 3.0 mm screw. In the trans-articular technique, the defect size was slightly smaller; 4.2% with the 2.2 mm screw and 8% with the 3.0 mm screw, but the differences were not statistically significant. The main advantage of the intra-articular technique was that it avoided damage to the articular surface of the metacarpal head.

scholarly journals Coccygeal Morphology on Multislice Computed Tomography in a Tertiary Hospital in India

2017 ◽  
Vol 11 (5) ◽  
pp. 694-699 ◽  
Author(s):  
Venkatraman Indiran ◽  
Vadivalagianambi Sivakumar ◽  
Prabakaran Maduraimuthu
Keyword(s):  
Computed Tomography ◽  
Indian Population ◽  
Normal Population ◽  
Tertiary Hospital ◽  
Cross Sectional Study ◽  
Ct Scans ◽  
Type I ◽  
Cross Sectional ◽  
Ethnic Populations ◽  
The Mean

<sec><title>Study Design</title><p>A retrospective, cross-sectional study of 213 patients who presented for abdominal computed tomography (CT) scans to assess coccygeal morphology in the Indian population.</p></sec><sec><title>Purpose</title><p>There have been relatively few studies of coccygeal morphology in the normal population and none in the Indian population. We aimed to estimate coccygeal morphometric parameters in the Indian population.</p></sec><sec><title>Overview of Literature</title><p>Coccygeal morphology has been studied in European, American, Korean, and Egyptian populations, with few differences in morphology among populations.</p></sec><sec><title>Methods</title><p>A retrospective analysis of 213 abdominal CT scans (114 males and 99 females; age, 7–88 years; mean age, 47.3 years) was performed to evaluate the number of coccygeal segments, coccyx type, sacrococcygeal and intercoccygeal fusion and subluxation, coccygeal spicules, sacrococcygeal straight length, and sacrococcygeal and intercoccygeal curvature angles. Results were analyzed for differences in morphology with respect to sex and coccyx type.</p></sec><sec><title>Results</title><p>Types I and II coccyx were the most common. Most subjects had four coccygeal vertebrae; 93 subjects (43.66%) had partial or complete sacrococcygeal fusion. Intercoccygeal fusion was common, occurring in 193 subjects. Eighteen subjects had coccygeal spicules. The mean coccygeal straight length was 33.8 mm in males and 31.5 mm in females; the mean sacrococcygeal curvature angle was 116.6° in males and 111.6° in females; the mean intercoccygeal curvature angle was 140.94° in males and 145.10° in females.</p></sec><sec><title>Conclusions</title><p>Type I was the most common coccyx type in our study, as in Egyptian and Western populations. The number of coccygeal vertebrae and prevalence of sacrococcygeal and intercoccygeal fusion in the Indian population were similar to those in the Western population. The mean coccygeal straight length and mean sacrococcygeal curvature angle were higher in males, whereas the intercoccygeal curvature angle was higher in females. Information on similarities and differences in coccygeal morphology between different ethnic populations could be useful in imaging and treating patients presenting with coccydynia.</p></sec>

The Feasibility Study of C1 Posterior Arch Crossing Screw Fixation in Adult Thai Population: A Computed Tomographic Morphometric Analysis Study

2021 ◽  
Vol 104 (3) ◽  
pp. 475-481
Keyword(s):  
Computed Tomography ◽  
Vertebral Artery ◽  
Screw Fixation ◽  
Ct Scans ◽  
Vertebral Artery Injury ◽  
Posterior Arch ◽  
Thai Population ◽  
Artery Injury ◽  
Left And Right ◽  
The Mean

Objective: Atlantoaxial instability can be caused by various etiologies and surgical fixation is often required. Various methods have been described for atlantoaxial fixation. Screw fixation is associated with an increased risk of vertebral artery injury especially in patients with an anomalous vertebral artery location or abnormal bony anomalies. A new C1 posterior arch crossing screw fixation technique was proposed to reduce the risk of vertebral artery injury. The present study aimed to assess morphometric CT analysis of atlas for C1 posterior arch crossing screw fixation in Thai people. Materials and Methods: The present research was an observational study that reviewed 150 computed tomography (CT) scans of the patients who had neck trauma or any other complaint requiring craniocervical investigations. Atlantoaxial articulation deformities due to trauma, infections, neoplasm, congenital anomaly, inflammatory disease, incomplete CT scan analysis, and history of surgical intervention of the cervical spine were excluded. All the images were measured for the height of the posterior tubercle, the width of the posterior arch was measured bilaterally in three parts on the axial plane, part 1: medial of the VA groove, where the arch transforms into the VA groove, part 2: the middle part between the posterior tubercle and medial of the VA, and part 3: posterior tubercle, length of the screw, and the screw projection angle was calculated. Results: Out of the 139 CT scans analyzed, the mean measurement of posterior arch height was 7.45±1.03 mm, wherein 73.3% exceed 7 mm. The mean width of the left posterior arch in part 1, 2, and 3 was 4.50±0.70 mm, 4.90±0.70 mm, and 5.70±0.80 mm, respectively, and the width of the right posterior arch in part 1, 2, and 3 was 4.50±0.70 mm, 4.80±0.70 mm, and 5.60±0.80 mm, respectively. The mean crossing screw length of the Left and Right was 17.02±3.04 mm and 17.37±2.75 mm, respectively. The mean angle of screw of the Left and Right was 24.62±3.38 degrees and 24.78±3.57 degrees, respectively. There were no significant differences in these variables between gender or sides (p>0.05) except the mean angle of the screw between gender (p<0.05). Conclusion: C1 posterior arch screw fixation is feasible in the adult Thai population. Preoperative thin-cut CT is essential for planning successful posterior arch crossing screws placement. Keywords: C1 posterior arch, Computed tomography, Crossing screw fixation

scholarly journals The incidence and outcome of incidental breast lesions detected by computed tomography

2010 ◽  
Vol 92 (2) ◽  
pp. 124-126 ◽  
Author(s):  
A Hussain ◽  
A Gordon-Dixon ◽  
H Almusawy ◽  
P Sinha ◽  
A Desai
Keyword(s):  
Breast Cancer ◽  
Computed Tomography ◽  
Breast Lesion ◽  
Chest Ct ◽  
Ct Scans ◽  
Breast Lesions ◽  
Breast Cancers ◽  
The Mean ◽  
The Uk ◽  
Symptomatic Breast

INTRODUCTION In the UK, the majority of breast cancers are diagnosed through symptomatic breast clinics and the breast screening programmes. With increased use of computed tomography (CT) to assess various pathologies, breast lesions are picked up incidentally. The aim of this study was to investigate the incidence and outcomes of breast lesions detected incidentally on CT scans. PATIENTS AND METHODS A retrospective study was conducted to assess the incidence and outcome of incidentally found breast lesions, which were detected on chest CT scans that were conducted for other pathologies during the period from February 2007 to October 2008. RESULTS A total of 432 chest CT scans were performed over 18 months. Thirty-three (7.63%) patients were found to have an incidental breast lesion. The mean age was 73 years (range, 50–86 years). Of these, 17 (52%) were benign, eight (24%) were primary breast cancer and the remaining eight (24%) had no definite pathology. The detection rate of breast cancer was 1.85%. CONCLUSIONS CT is emerging as an important contributor to the detection of occult breast lesions. Radiological awareness of incidental breast lesions is important so that appropriate referral to a specialised breast unit is made.

scholarly journals Simple Linear Calculating Method of Glenoid Bone Defects Using 3-Dimensional Computed Tomography Based on an East Asian Population in China

2020 ◽  
Vol 8 (4) ◽  
pp. 232596712091427
Author(s):  
Xing-zuo Chen ◽  
Tong-xi Liu ◽  
Ying Chen ◽  
Lei Du ◽  
Wei-fang Liu ◽  
...  
Keyword(s):  
Computed Tomography ◽  
East Asian ◽  
Asian Population ◽  
Bone Defects ◽  
East Asian Population ◽  
Ct Scans ◽  
Male And Female ◽  
Female Patients ◽  
The Mean ◽  
The Relationship

Background: The evaluation of glenoid bone defects in the preoperative stage for patients with anterior shoulder instability is critical for surgical decision making. A novel method that predicts the intact glenoid width based purely on the measurement of the glenoid height has been advocated. Despite the convenience, all studies to date have focused on the Western population, and there is no similar research based on an East Asian population. Purpose: To determine the relationship between glenoid height and width in an East Asian population. Study Design: Cross-sectional study; Level of evidence, 3. Methods: Spiral computed tomography (CT) scans of both sides of the shoulder joints were obtained from 205 patients of Han nationality (China) who had no history of shoulder trauma or pain. The maximal height and width of each glenoid were measured on the en face view by 2 radiologists who were blinded to each other’s results. Pearson correlation coefficients and multivariable linear regression were calculated from all data measured to evaluate the relationship between maximal glenoid height and width between the sexes. Results: A total of 205 patients (410 shoulder CT scans) were analyzed. The mean glenoid height was 34.45 ± 2.82 mm, and the mean glenoid width was 23.35 ± 2.40 mm. There was a statistical difference between male and female patients with regard to glenoid height (36.61 vs 32.39 mm, respectively; t = 9.76; P < .001) and width (25.26 vs 21.54 mm, respectively; t = 20.73; P < .001). Analysis of the measured glenoid height and width demonstrated a strong linear correlation of 0.82 ( R 2 = 0.68; P < .001) for the entire cohort and similarly strong linear correlations when each sex was analyzed separately. For male patients, the glenoid width was measured as: glenoid height × 0.50 + 7 mm ( R 2 = 0.36; P < .001); for female patients, the glenoid width was measured as: glenoid height × 0.45 + 7 mm ( R 2 = 0.31; P < .001). Conclusion: In an East Asian population, the mean glenoid height and width were 34.45 and 23.35 mm, respectively. The formulas that represent the relationship between glenoid width and height for male and female patients are the following: glenoid width = glenoid height × 0.50 + 7 mm and glenoid width = glenoid height × 0.45 + 7 mm, respectively.

Sign in / Sign up

Export Citation Format

Share Document