scholarly journals COMPARATIVE STUDY OF SUPERDISINTEGRANTS USING ANTIEMETIC DRUG AS A MODEL

2015 ◽  
Vol 05 (01) ◽  
pp. 040-044
Author(s):  
D S Sandeep ◽  
R Narayana Charyulu ◽  
Prashant Nayak
Keyword(s):  
Drug Release ◽  
Antiemetic Drug ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Orally Disintegrating Tablets ◽  
Wetting Time ◽  
Model Drug

AbstractIn the present investigation comparison of three different superdisintegrants was carried out by formulating orally disintegrating tablets. Promethazine HCl was used as model drug which is an antiemetic drug. Sodium starch glycolate, croscarmellose and crospovidone were selected as superdisintegrants and each one was used in three different concentrations (2%, 3.5% and 5%). The drug-polymer compatibility was ruled out by FTIR studies. A total of nine formulations (PF1-PF9) were made by direct compression. All prepared formulations were evaluated for weight variation, hardness, friability, drug content, disintegration time, wetting time and in vitro drug release parameters. The results of the evaluation parameters for all the nine formulations of promethazine HCl were within the standard limits. The in vitro drug release for promethazine HCl tablets of all the formulations (PF1-PF9) was carried out using phosphate buffer pH 6.8 as dissolution medium. Among all the formulations the tablets formulated with crospovidone (PF7-PF9) have shown 91.43 - 98.43% (maximum) drug release at the end of 10 min than sodium starch glycolate and croscarmellose, hence from the present work, it concluded that among three superdisintegrants crospovidone is the ideal superdisintegrant for formulating oral disintegrating tablets for promethazine HCl.

scholarly journals Formulation design, optimization & in vitro evaluation of novel orodissolving tablets of efavirenz for hiv infections

2015 ◽  
Vol 49 (3) ◽  
pp. 173-180
Author(s):  
T Ayyappan ◽  
C Poojitha ◽  
T Vetrichelvan
Keyword(s):  
Drug Release ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Wetting Time

In the present work, orodissolving tablets of Efavirenz were prepared by direct compression method with a view to enhance patient compliance. A 23 full factorial design was applied to investigate the combined effect of three formulation variables. Amount of crospovidone, croscarmellose sodium and sodium starch glycolate were used as superdisintegrant material along with direct compressible mannitol to enhance mouth feel. The prepared batches of tablets were evaluated for hardness, friability, weight variation, disintegration time, wetting time, drug content and in-vitro dissolution studies. Based on wetting time, disintegration time, the formulation containing crospovidone (5% w/v), carscarmellose sodium (5% w/v) and sodium starch glycolate (8% w/v) was found to be promising and tested for in-vitro drug release pattern (in 0.1 N HCl), short term stability and drug- superdisintegrants interaction. Surface response plots are presented to graphically represent the effect of independent variables (conc. of superdisintegrants) on the in-vitro dissolution time. The validity of the generated mathematical model was tested by preparing extra-design check point formulation. The formulation showed nearly faster drug release compared to the conventional commercial tablet formulation. Stability studies on the optimized formulation indicated that there was no significant change found in physical appearance, hardness, disintegration time, drug content and in-vitro drug release. DOI: http://dx.doi.org/10.3329/bjsir.v49i3.22131 Bangladesh J. Sci. Ind. Res. 49(3), 173-180, 2014

Formulation and Evaluation of Orally Disintegrating Tablets of Lamotrigine

2015 ◽  
Vol 8 (2) ◽  
pp. 2881-2888
Author(s):  
Sudarshan Singh ◽  
S S Shyale ◽  
P Karade
Keyword(s):  
Drug Release ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium

The aim of this study was to design orally disintegrating tablet (ODT) of Lamotrigine. It is an Antiepileptic drug which is widely used in epilepsy. It is also used in simple and complex partial seizures and secondary generalized tonic-clonic seizures. It is poorly water soluble drug (0.46 mg/ml). Thus, an attempt was made to enhance the water solubility by complexation with β-cyclodextrin (1:1 molar ratios). The orally disintegrating tablet of lamotrigine was prepared by direct compression method using different concentration of superdisintegrants such as Sodium starch glycollate, croscarmellose sodium by sublimating agent such as camphor. The formulations were evaluated for weight variation, hardness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies. The prepared tablets were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. The disintegration time for the complexed tablets prepared by different concentration of superdisintegrants was found to be in range of 32.54 ± 0.50 to 55.12 ± 0.57 sec and wetting time of the formulations was found to be in range of 28.47 ± 0.67 to 52.19 ± 0.72 sec. All the formulation showed almost 100 percent of drug release within 15 min. Among all the formulation F6 and F7 prepared with 18% croscarmellose sodium and camphor shows faster drug release, respectively 10 min, F6 gives good result for disintegration time, drug release, wetting time and friability. Further formulations were subjected to stability testing for 30 days at temperature of 40 ± 5 ºC/75 ± 5 %RH. Tablets showed no appreciable changes with respect to physical appearance, drug content, disintegration time and dissolution profiles. Results were statistically analyzed by one-way ANOVA at a p < 0.05. It was found that, the data at any point of time are significant at p < 0.05.

scholarly journals FORMULATION AND EVALUATION OF FLURBIPROFEN FAST DISINTEGRATING TABLETS USING NATURAL SUPERDISINTEGRANTS

2016 ◽  
Vol 9 (6) ◽  
pp. 247 ◽  
Author(s):  
Mohammed Sarfaraz ◽  
Surendra Kumar Sharma
Keyword(s):  
Drug Release ◽  
Angle Of Repose ◽  
Lepidium Sativum ◽  
Disintegration Time ◽  
Natural Sources ◽  
Weight Variation ◽  
Wetting Time ◽  
Tapped Density ◽  
Fast Disintegrating Tablets

ABSTRACTObjective: The main objective of this research was to formulate Fast disintegrating tablets of Flurbiprofen incorporating superdisintegrants, isolated from natural sources like Plantago ovata (PO) seeds, Lepidium sativum (LS) seeds and agar-agar.Methods: Superdisintegrants were isolated from their natural sources using reported methods. Swelling index and hydration capacity was determined for the natural superdisintegrants to know their disintegration capacity. The tablet formulations were designed using isolated natural superdisintegrants. The powder blends were evaluated for pre-compressional parameters like angle of repose, bulk density, tapped density, carr’s index, and hausner’s ratio. Fast disintegrating tablets were prepared by direct compression method. The compressed tablets were characterized for post compression parameters.Results: All formulations had hardness, friability, weight variation and drug content within the pharmacopoeial limits. The wetting time was 84 to 254 sec, in vitro disintegration time was between 59.2 to 221 sec, and in-vitro drug release was as low as 11.80% (LS1) to a maximum of 98.99% (PO4) after 4 min of study. Among all, optimized formulation was PO4, as it showed good wetting time (84 sec), fastest disintegration time (59.2 sec), dispersion time (135 sec) and drug release of 98.99.% within 4 min.Conclusion: Flurbiprofen FDT’s were successfully developed using isolated natural disintegrants. The natural disintegrants isolated showed promising results and can prove as effective alternative for synthetic disintegrants.

scholarly journals FORMULATION AND IN VITRO EVALUATION OF FAST DISSOLVING TABLET OF VERAPAMIL HYDROCHLORIDE

2018 ◽  
Vol 10 (10) ◽  
pp. 93 ◽  
Author(s):  
Dattatraya M. Shinkar ◽  
Pooja S. Aher ◽  
Parag D. Kothawade ◽  
Avish D. Maru
Keyword(s):  
Drug Release ◽  
Phosphate Buffer ◽  
Research Work ◽  
Time Interval ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Verapamil Hydrochloride ◽  
Sodium Starch Glycolate ◽  
Croscarmellose Sodium

Objective: The main objective of this research work was to formulate and evaluate fast dissolving tablet of verapamil hydrochloride for the treatment of hypertension.Methods: In this study, fast dissolving tablet were prepared by wet granulation method by using croscarmellose sodium and sodium starch glycolate as superdisintegrants in the concentration of 2%, 4%, and 6%. Polyvinyl pyrollidone K30 is used as a binder. The designed tablets were subjected to various assessment parameters like friability test, hardness test, disintegration test, wetting time, in vitro drug release and drug content.Results: All the prepared formulations were subjected to various assessment parameters, and the findings obtain within the prescribed limit. The calibration curve of pure drug using various solvents like distilled water, phosphate buffer pH 6.8 was plotted. F1-F9 containing croscarmellose sodium and sodium starch glycolate in various concentration demonstrate the minimum disintegration time. Among all these formulations F8 shows disintegration time upto 19±0.06 seconds due to the high concentration of superdisintegrants. In vitro drug release was tested in phosphate buffer pH 6.8 at a time interval of 0, 1, 3,6,9,12,15 min. The F8 shows drug release 98.5±0.567%. Accelerated stability study of optimized formulation (F8) up to 2 mo showed there was no change in disintegration time and percentage drug release.Conclusion: The results obtained in the research work clearly showed a promising potential of fast dissolving tablets containing a specific ratio of crosscarmellose sodium and sodium starch glycolate as superdisintegrants for the effective treatment of hypertension. 

scholarly journals DESIGN, DEVELOPMENT AND EVALUATION OF MOUTH DISSOLVING TABLETS OF TOFACITINIB CITRATE

2022 ◽  
pp. 238-245
Author(s):  
MEGHANA RAYKAR ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Release ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Design Development ◽  
Disintegration Time ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Bulk Drug

Objective: This study aims to Formulate Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate with the increase in bioavailability and patient compliance. Methods: Mouth Dissolving Tablets (MDTs) of Tofacitinib Citrate were developed by full factorial design at 32levelsand prepared by direct compression method using super integrants like sodium starch glycolate, Ludiflash. The tablets were compressed into compacts on a 10 station tablet machine. The bulk drug was characterised by determining, MP, Solubility, pH and FTIR spectra. Results: The weight variation, hardness and diameter, thickness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies, and stability study, tablet thickness, weight variation and drug content post compression parameters remained consistent and reproducible. All the formulations showed, almost 100 percent of drug release within 75 min. Formulations F1, F2 and F3 were prepared with 5 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F1<F2<F3. Formulations F4, F5 and F6 were prepared with 10 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F4<F5<F6. Formulations F7, F8 and F9 were prepared with 15 mg of SSG and 20 mg, 30 mg, and 40 mg Ludiflash which shows % release of drug in the order of F7<F8<F9. Conclusion: It is concluded that the amount of superdisintegrants decreases disintegration time of tablets, decreases wetting time, increases the cumulative % drug release causes better absorption.

scholarly journals Fexofenadine HCl Immediate Release Tablets: In vitro Characterization and Evaluation of Excipients

2013 ◽  
Vol 16 (1) ◽  
pp. 1-9
Author(s):  
Shahriar Ahmed ◽  
Mehrina Nazmi ◽  
Ikramul Hasan ◽  
Sabiha Sultana ◽  
Shimul Haldar ◽  
...  
Keyword(s):  
Drug Release ◽  
Immediate Release ◽  
Pharmaceutical Journal ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
In Vitro Characterization ◽  
Weight Variation ◽  
Fexofenadine Hcl

Fexofenadine HCl immediate release tablets were designed to increase the dissolution rate by using superdisintegrants. Different formulations of Fexofenadine HCl were prepared by direct compression method. These formulations were evaluated for hardness, thickness, friability, weight variation, disintegration time, and in vitro dissolution study. The drug release from the formulations were studied according to USP specification (USP paddle method at 50 rpm for 60 minutes) maintaining the temperature to 37°C. Sodium starch glycolate, cross carmellose sodium, crospovidone (kollidon CL), ludiflash and xanthan gum were used in 3%, 6% and 8% concentrations as superdisintegrants. Thus, the ratio of superdisintegrants was changed whereas all the other excipients as well as the active drug (Fexofenadine HCl) remained same in every formulation. Here, 0.001N HCl was used as dissolution medium according to USP and absorbances were determined by using UV spectrophotometer at 217 nm. The F-3 and F-6 formulation prepared by 8% of Sodium starch glycolate and 8% of Cross carmellose sodium showed 99.99% drug release within 30 minutes and 45 minutes, respectively. The disintegration times of F-3 and F-6 formulation were within 9 seconds. The interactions between drug and excipients were characterized by FTIR spectroscopic study. DOI: http://dx.doi.org/10.3329/bpj.v16i1.14483 Bangladesh Pharmaceutical Journal 16(1): 1-9, 2013

scholarly journals Formulation and Evaluation of Loperamide HCl Oro Dispersible Tablets

2020 ◽  
Vol 13 (5) ◽  
pp. 100
Author(s):  
Blasco Alejandro ◽  
Torrado Guillermo ◽  
Peña M Ángeles
Keyword(s):  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Biomedical Sciences ◽  
Disintegration Time ◽  
Weight Variation ◽  
Orally Disintegrating Tablets ◽  
Wetting Time ◽  
Percentage Of Water Absorption ◽  
Hostile Environments

This work proposes the design of novel oral disintegrating tablets (ODTs) of loperamide HCl with special emphasis on disintegration and dissolution studies. The main goal was augmenting the adherence to treatment of diseases which happen with diarrhea in soldiers who are exposed to diverse kinds of hostile environments. Optimized orally disintegrating tablets were prepared by the direct compression method from galenic development to the industrial scale technique, thanks to strategic and support actions between the Spanish Army Force Lab and the Department of Biomedical Sciences (UAH). The results show that loperamide HCl ODT offers a rapid beginning of action and improvement in the bioavailability of poorly absorbed drugs. The manufactured ODTs complied with the pharmacopeia guidelines regarding hardness, weight variation, thickness, friability, drug content, wetting time, percentage of water absorption, disintegration time, and in vitro dissolution profile. Drug compatibility with excipients was checked by DSC, FTIR, and SEM studies.

scholarly journals FORMULATION AND EVALUATION OF MOUTH DISSOLVING TABLET OF AMLODIPINE BESYLATE

2019 ◽  
pp. 132-139
Author(s):  
MEGHAWATI R. BADWAR ◽  
SANDHYA L. BORSE ◽  
MANISH S. JUNAGADE ◽  
ANIL G. JADHAV
Keyword(s):  
Drug Release ◽  
Research Work ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Sodium Starch Glycolate ◽  
Treatment Of Hypertension ◽  
Croscarmellose Sodium ◽  
Artery Disease ◽  
Mouth Dissolving Tablet

Objective: The main objective of this research work was to formulate and evaluate the mouth dissolving tablet of amlodipine besylate for the treatment of hypertension and coronary artery disease. Methods: In this study, mouth dissolving tablet were prepared by direct compression method by using croscarmellose sodium and sodium starch glycolate as superdisintegrants. The designed tablets were subjected to various assessment parameters like friability test, hardness test, disintegration test, wetting time, in vitro drug release and drug content. Results: All the prepared formulations were subjected to various assessment parameters, and the findings obtain within the prescribed limit. The calibration curve of pure drug using various solvents like phosphate buffer pH 6.8, methanol was plotted. F1-F9 containing croscarmellose sodium and sodium starch glycolate in various concentration demonstrate the minimum disintegration time. Among all these formulations F9 shows disintegration time up to 22±1.12 seconds due to the high concentration of superdisintegrants. In vitro drug release was tested in phosphate buffer pH 6.8 at a time interval of 0, 1, 2, 3, 4, 5 min. The F9 shows drug release 100.22±1.08%. Accelerated stability study of optimized formulation (F9) up to 2 mo showed there was no change in disintegration time and percentage drug release. Conclusion: The results obtained in the research work clearly showed a promising potential of mouth dissolving tablets containing a specific ratio of croscarmellose sodium and sodium starch glycolate as superdisintegrants for the effective treatment of hypertension and coronary artery disease.

scholarly journals Formulation and Evaluation of Ketorolac Tromethamine Mouth Dissolving Tablets

2021 ◽  
Vol 11 (1) ◽  
pp. 60-64
Author(s):  
Rishabh Bindal ◽  
Arpna Indurkhya
Keyword(s):  
Ketorolac Tromethamine ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Solid Dosage ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Croscarmellose Sodium ◽  
Fast Release

Due to more versatility and comfort, mouth dissolving tablets are the most advanced type of oral solid dosage forms. Compared to conventional tablets, it increases the effectiveness of APIs by dissolving within a minute in the oral cavity after contact with less saliva, without chewing and without the need for water for administration. Mouth Dissolving Tablets of Ketorolac tromethamine were prepared by direct compression method using various superdisintegrants like crospovidone, Croscarmellose sodium, and Sodium starch glycolate in different concentrations. Prepared tablets were evaluated for hardness, friability, weight variation, disintegration time, wetting time and in vitro drug release. Results of pre-compression and post-compression studies of all formulations were found within the standard limits. The tablets of all the batches were found to release more than 80% of drug in 5 minutes, which is the desired quality of mouth dissolving tablets that helps in faster absorption of the drug and quick onset of therapeutic effect. The the order of dissolution of various disintegrants was found to be Crospovidone˃ SSG˃ CCS. There was no significant variation in drug content of drug during stability studies for selected batch F3 in accelerated conditions over three months. It was concluded from the study that fast release of Ketorolac tromethamine from formulation F3 may reduce onset of drug action with better patient compliance. Keywords: Crospovidone, Croscarmellose sodium, Ketorolac tromethamine, Mouth dissolving tablets, Sodium starch glycolate, superdisintegrants.

scholarly journals Enhancement of Solubility of Lamotrigine by Solid Dispersion and Development of Orally Disintegrating Tablets Using 32 Full Factorial Design

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Jatinderpal Singh ◽  
Rajeev Garg ◽  
Ghanshyam Das Gupta
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Solid Dispersion ◽  
Disintegration Time ◽  
Drug Release Study ◽  
Orally Disintegrating Tablets ◽  
Wetting Time ◽  
Release Study ◽  
Full Factorial

Present investigation deals with the preparation and evaluation of orally disintegrating tablets (ODTs) of lamotrigine using β-cyclodextrin and PVP-K30 as polymers for the preparation of solid dispersion which help in enhancement of aqueous solubility of this BCS CLASS-II drug and sodium starch glycolate (SSG) and crospovidone as a superdisintegrating agent, to reduce disintegration time. The ODTs were prepared by direct compression method. Nine formulations were developed with different ratios of superdisintegrating agents. All the formulations were evaluated for disintegration time, weight variation, hardness, friability, drug content uniformity, wetting time, and in vitro drug release study. In vitro drug release study was performed using United States Pharmacopoeia (USP) type 2 dissolution test apparatus employing paddle stirrer at 50 rpm using 900 mL of 0.1 N HCl maintained at 37°C ± 0.5°C as the dissolution medium. On the basis of evaluation parameters formulations were prepared using β-CD 1 : 1 solid dispersion. Then 32 full factorial design was applied using SSG and crospovidone in different ratios suggested by using design expert 8.0.7.1 and optimized formulation was prepared using amount of SSG and crospovidone as suggested by the software. The optimized formulation prepared had disintegrating time of 15 s, wetting time of 24 s, and % friability of 0.55.

Sign in / Sign up

Export Citation Format

Share Document