Hydrodynamic Characteristics of a Free-Surface Semicircular Breakwater Exposed to Irregular Waves

2012 ◽  
Vol 138 (2) ◽  
pp. 149-163 ◽  
Author(s):  
Hee Min Teh ◽  
Vengatesan Venugopal ◽  
Tom Bruce
Keyword(s):  
Free Surface ◽  
Irregular Waves ◽  
Hydrodynamic Characteristics ◽  
Semicircular Breakwater

scholarly journals PERFORMANCE ANALYSIS OF COMPOSITE SEMICIRCULAR BREAKWATERS OF DIFFERENT CONFIGURATIONS AND POROSITIES

2012 ◽  
Vol 1 (33) ◽  
pp. 38 ◽  
Author(s):  
Hee Min Teh ◽  
Vengatesan Venugopal ◽  
Tom Bruce
Keyword(s):  
Free Surface ◽  
Energy Dissipation ◽  
Performance Analysis ◽  
Physical Modelling ◽  
High Energy ◽  
Immersion Depth ◽  
Irregular Waves ◽  
Hydrodynamic Characteristics ◽  
Semicircular Breakwater ◽  
High Energy Dissipation

The perforated free surface semicircular breakwater developed by Teh et al. (2010) was experimentally proven to be an effective anti-reflection structure with high energy dissipation ability. However, the performance characteristics of the breakwater deteriorated with a decrease in the immersion depth and an increase in wavelength. To enhance the performance of the breakwater with limited immersion depth, wave screens of different configurations and porosities were introduced below the free surface semicircular caisson. The hydrodynamic characteristics of these composite breakwaters were investigated in irregular waves using physical modelling. Comparisons of the experimental results showed that the semicircular caisson with a double screen of 25% porosity was a better breakwater configuration compared to that with a single screen. The extension of wave screen was also found to be particularly helpful in attenuating longer waves.

Performance Analysis of a Semicircular Free Surface Ocean Structure under the Different Water Depths

2011 ◽  
Vol 90-93 ◽  
pp. 2782-2789
Author(s):  
Gang Jun Zhai ◽  
Zhe Ma ◽  
Hee Min Teh ◽  
Vengatesan Venugopal
Keyword(s):  
Free Surface ◽  
Wave Height ◽  
Incident Wave ◽  
Wave Attenuation ◽  
Hydrodynamic Characteristics ◽  
Irregular Wave ◽  
Surface Ocean ◽  
Semicircular Breakwater ◽  
Water Depths ◽  
Structure Width

The increasing importance of the sustainability challenge in o engineering has led to the development of free surface ocean structure of various configurations. In this study, the hydrodynamic characteristics of a perforated free surface, semicircular breakwater (SCB) are investigated for irregular wave conditions under the different water depths. The performance of the breakwaters was evaluated in the form of coefficients of transmission (CT), reflection (CR) and energy dissipation (CL). The measured wave modification in front of the structure and in the structure’s chamber were quantified and presented in the form of a ratio relative to the incident wave height, respectively, which are then presented as a function of the relative immersion depth (D/d) and the relative structure width (B/Lp), where D = the depth of immersion, d = the water depth, B = the structure width and Lp = the wavelength corresponding to the peak wave period. The measured wave modification in front of the structure and in the breakwater’s chamber were quantified and presented in the form of a ratio relative to the incident wave height, respectively. It is found that the wave attenuation ability of the SCB model improves with the increase of D/d and B/Lp. The SCB performs better as an energy dissipater than as a wave reflector.

Performance Analysis of a Semicircular Free Surface Breakwater

2011 ◽  
Author(s):  
Hee Min Teh ◽  
Vengatesan Venugopal ◽  
Tom Bruce
Keyword(s):  
Free Surface ◽  
Hydrodynamic Performance ◽  
Hydrodynamic Characteristics ◽  
Wave Forces ◽  
Front Wall ◽  
Wave Flume ◽  
Horizontal Wave ◽  
Wave Heights ◽  
Significant Wave Heights ◽  
Semicircular Breakwater

In the present study, the hydrodynamic performance of a semicircular free surface breakwater (SCB) has been investigated through a systematic experimental programme. Three semicircular breakwater models were tested: one with impermeable front and rear walls; a second with perforated front wall and impermeable rear wall; and a third with perforated front and rear walls. The models were tested for three submergence depths with reference to the still water level in a wave flume under irregular seas with different significant wave heights and peak periods. The performance of the breakwaters was evaluated in the form of coefficients of transmission (CT), reflection (CR) and energy dissipation (CL). The measured wave modification in front of the structure and in the breakwater’s chamber were quantified and presented in the form of a ratio relative to the incident wave height, respectively. Also, the measured horizontal wave forces acting on the SCB were analysed and reported in a dimensionless form. Empirical equations were then developed using nonlinear multiple regression models to estimate the hydrodynamic characteristics of the SCB models.

Oblique Irregular Waves Load on Semicircular Breakwater

2005 ◽  
Vol 47 (4) ◽  
pp. 183-204 ◽  
Author(s):  
Ning-Chuan Zhang ◽  
Li-Qin Wang ◽  
Yu-Xiu Yu
Keyword(s):  
Irregular Waves ◽  
Semicircular Breakwater

Multi Vessel Interaction in Shallow Water

2009 ◽  
Author(s):  
Hans Fabricius Hansen ◽  
Stefan Carstensen ◽  
Erik Damgaard Christensen ◽  
Jens Kirkegaard
Keyword(s):  
Shallow Water ◽  
Wave Model ◽  
Irregular Waves ◽  
Numerical Code ◽  
Scale Model ◽  
Hydrodynamic Characteristics ◽  
Mooring Line ◽  
Industry Standard ◽  
Physical Scale ◽  
The Time Domain

A numerical package for simulating vessel motions in the time domain, WAMSIM, is extended to handle multiple moving bodies interconnected through a nonlinear mooring system. WAMSIM relies on the industry standard program WAMIT to calculate the hydrodynamic characteristics and interaction of multiple bodies in the frequency domain. The numerical code is used to simulate the motions and mooring line and fender forces of two LNG tankers moored side-by-side in shallow water. One of the gas tankers is moored to the sea floor through a turret with chain catenaries. Realistic short-crested irregular waves obtained from a Boussinesq wave model are used to force the model. Motion spectra of the simulated motions are compared to measured motions from physical scale model tests. The model shows good agreement with measured motions and mooring line forces.

Experimental Study on Hydrodynamics of Hybrid Deep-V Monohull With Different Built-Up Appendages

2018 ◽  
Author(s):  
Shuzheng Sun ◽  
Hui Li ◽  
Muk Chen Ong
Keyword(s):  
Model Test ◽  
Performance Model ◽  
Hydrodynamic Performance ◽  
Irregular Waves ◽  
Hydrodynamic Characteristics ◽  
Vertical Acceleration ◽  
Test Results ◽  
Regular Waves ◽  
Sea State ◽  
Seakeeping Performance

The hydrodynamic characteristics of a hybrid deep-V monohull with different built-up appendages are investigated experimentally in order to improve the resistance and seakeeping performance. Model tests have been carried out to study the hydrodynamic performance between a bare deep-V vessel and a deep-V monohull with different built-up appendage configurations (i.e. a hybrid deep-V monohull). From the model test results, it is found that the existence of the appendages will reduce the amplitude of pitching angle and bow vertical acceleration compared to that of the bare deep-V vessel in heading regular waves. However, the resistances for the hybrid deep-V monohull with built-up appendages are increased 15.6% for Fn = 0.264, and 0.1% for Fn = 0.441 compared to the resistance of the bare deep-V vessel. The model test results of seakeeping performance in irregular waves show that the hybrid deep-V monohull gives a better seakeeping performance than the deep-V vessel. The pitching angle and bow vertical acceleration of the hybrid deep-V monohull containing a built-up appendage are reduced 15.3% and 20.6% compared to the deep-V monohull in irregular waves at Fn = 0.441 in 6th class sea state (H1/3 = 6m).

Numerical Simulations of Regular and Irregular Wave Forces on a Horizontal Semi-Submerged Cylinder

2017 ◽  
Author(s):  
Shengnan Liu ◽  
Muk Chen Ong ◽  
Charlotte Obhrai ◽  
Sopheak Seng
Keyword(s):  
Experimental Data ◽  
Free Surface ◽  
Numerical Simulations ◽  
Stokes Equations ◽  
Wave Length ◽  
Wave Structure ◽  
Numerical Results ◽  
Irregular Waves ◽  
Wave Forces ◽  
Submerged Cylinder

Two-dimensional (2D) numerical simulations have been performed using OpenFOAM (an open source CFD software package [1]) and waves2Foam (an OpenFOAM based add-on library for wave generations and absorption [2]) to investigate free surface waves past one fixed horizontally semi-submerged cylinder. The 2-D simulations are carried out by solving Navier-Stokes equations which are discretized based on finite volume method (FVM). Volume of Fluid (VOF) method is employed to capture the free surface in the numerical wave tank. Validation studies have been performed by comparing the numerical results of Stokes first-order wave past a semi-submerged circular cylinder with the published experimental data at different incident wave properties. The numerical results are in good agreement with the experimental data. Subsequently, regular and irregular waves past semi-submerged cylinder at different wave heights and the wave lengths are computed numerically to investigate the effect of the wave height and wave length on wave-structure interaction. The numerical results for irregular waves are compared with those induced by regular waves.

scholarly journals HYDRODYNAMIC PERFORMANCE OF A FREE SURFACE SEMICIRCULAR PERFORATED BREAKWATER

2011 ◽  
Vol 1 (32) ◽  
pp. 20 ◽  
Author(s):  
Hee Min Teh ◽  
Vengatesan Venugopal ◽  
Tom Bruce
Keyword(s):  
Free Surface ◽  
Wave Attenuation ◽  
Hydrodynamic Performance ◽  
Wave Transformation ◽  
Hydrodynamic Characteristics ◽  
Wave Forces ◽  
Irregular Wave ◽  
Energy Dissipater ◽  
Horizontal Wave ◽  
Perforated Breakwater

The increasing importance of the sustainability challenge in coastal engineering has led to the development of free surface breakwaters of various configurations. In this study, the hydrodynamic characteristics of a perforated semicircular free surface breakwater (SCB) are investigated for irregular wave conditions. The hydrodynamic performance of the breakwater is evaluated in the form of transmission, reflection and energy dissipation coefficients, which are then presented as a function of the relative submergence depth (D/d) and the relative breakwater width (B/Lp), where D = the depth of immersion, d = the water depth, B = the breakwater width and Lp = the wavelength corresponding to the peak wave period. It is found that the wave attenuation ability of the SCB model improves with the increase of D/d and B/Lp. The SCB performs better as an energy dissipater than as a wave reflector. Based on the analysis of measured data, some empirical equations are proposed to predict the performance of the breakwater under varying submergence depths. The behaviour of wave transformation around and within the breakwater’s chamber is discussed. Also, the measured horizontal wave forces acting on the SCB are reported.

Sign in / Sign up

Export Citation Format

Share Document