Free‐Carrier Faraday Rotation of Dendritic InSb Films in the Microwave X‐Band Region

1967 ◽  
Vol 38 (8) ◽  
pp. 3171-3178 ◽  
Author(s):  
D. J. White ◽  
R. J. Dinger ◽  
H. H. Wieder
Keyword(s):  
Faraday Rotation ◽  
Free Carrier ◽  
Band Region ◽  
X Band

Preparation of Ferrimagnetics-Ferroelectrics Composites and Studying Their Microwave Characteristics at X-Band Region

2017 ◽  
Vol 13 (4) ◽  
pp. 182-195
Author(s):  
Tahseen H Mubarak ◽  
◽  
Bruska A. Azhdar ◽  
Saib Thiab Alwan ◽  
Hussein S Mahmood
Keyword(s):  
Band Region ◽  
X Band ◽  
Microwave Characteristics

Free‐carrier induced saturation of the Faraday rotation in semimagnetic semiconductors

1995 ◽  
Vol 66 (16) ◽  
pp. 2043-2045 ◽  
Author(s):  
S. Hugonnard‐Bruyère ◽  
C. Buss ◽  
R. Frey ◽  
C. Flytzanis
Keyword(s):  
Faraday Rotation ◽  
Free Carrier ◽  
Semimagnetic Semiconductors

Performance of a Wideband Cadmium Ferrite Microstrip Patch Antenna in the X-Band Region

2017 ◽  
Vol 47 (1) ◽  
pp. 577-584 ◽  
Author(s):  
S. R. Bhongale ◽  
H. R. Ingavale ◽  
T. J. Shinde ◽  
P. N. Vasambekar
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch ◽  
Band Region ◽  
X Band

scholarly journals Entire X-band region metamaterial absorber and reflector with a microstrip patch switch for X-band applications

2019 ◽  
Vol 15 (3) ◽  
pp. 1452
Author(s):  
M.M. Gajibo ◽  
M. K. A. Rahim ◽  
N. A. Murad ◽  
O. Ayop ◽  
H.A. Majid ◽  
...  
Keyword(s):  
Wide Band ◽  
Metamaterial Absorber ◽  
Frequency Range ◽  
Metamaterial Structure ◽  
Band Frequency ◽  
Microstrip Patch ◽  
Band Region ◽  
X Band

<span>A metamaterial structure capable of operating as a wide band absorber as well as an AMC reflector is presented in this report. A microstrip patch copper was used as a switch to switch between the two modes. An FR4 substrate was used and the incidental wave angles were varied from 0<sup>0</sup> to 60<sup>0</sup>. Simulations results showed that the absorber was able achieve 96% absorption at 13.05 GHz and 100% absorption at 10.00 GHz and 12.00 GHz. Furthermore, it archived over 85% absorption for the entire X-band frequency range. The AMC reflector also was able to achieve 84.97%, 82.88% and 78.69% for incident angles 0<sup>0</sup>, 20<sup>0 </sup>and 40<sup>0</sup> respectively. Unfortunately, the structure is polarization sensitive.</span>

Fan Shaped Patch with Fan Shaped Defected Ground Structure is designed for X-band Applications

2018 ◽  
Vol 8 (4) ◽  
pp. 57
Author(s):  
K.S. Ravi Kumar ◽  
Lalbabu Prasad ◽  
B. Ramesh ◽  
K.P. Vinay
Keyword(s):  
Dielectric Constant ◽  
Low Cost ◽  
Dielectric Substrate ◽  
Substrate Material ◽  
Frequency Range ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Band Region ◽  
X Band ◽  
Simulation Results

In this novel work a simple Fan Shaped Patch (FSP) Antenna is designed for X-band applications using Fan Shaped DGS structure to improve the Bandwidth and Gain. The Antenna is designed by using low cost FR4 Epoxy dielectric substrate material having dielectric constant of 4.4 with size 31.4x28.33x1.6mm3. The Antenna is simulated by using CST MW studio2014 software to analyze the results. The simulation results shows reasonable |S11|<-10 for the frequency range over 8.38 to 11.59GHz in X-band region.

Investigation of microwave absorption property of the core–shell structured Li0.4Mg0.6Fe2O4/TiO2 nanocomposite in X-band region

2014 ◽  
Vol 590 ◽  
pp. 331-340 ◽  
Author(s):  
Pallab Bhattacharya ◽  
Goutam Hatui ◽  
Avinandan Mandal ◽  
Chapal Kumar Das ◽  
Rudresh Kumar ◽  
...  
Keyword(s):  
Microwave Absorption ◽  
Microwave Absorption Property ◽  
Core Shell ◽  
Absorption Property ◽  
The Core ◽  
Band Region ◽  
X Band
Sign in / Sign up

Export Citation Format

Share Document