For validating the number of displacements per atom (dpa) for tungsten under high-energy proton irradiation, we measured displacement cross sections related to defect-induced electrical resistivity changes in a tungsten wire sample under irradiation with 389-MeV protons under 10 K. The Gifford–McMahon cryocooler was used to cool the sample using a conductive coolant via thermal conduction plates of oxygen-free high-conductivity copper and electrical insulation sheets of aluminum nitride ceramic. In this experiment, the displacement cross section was 1612 ± 371 b for tungsten at 389 MeV. A comparison of the experimental displacement cross sections of tungsten with the calculated results obtained using Norgett–Robinson–Torrens (NRT) dpa and athermal recombination-corrected (arc) dpa cross sections indicates that arc-dpa was in better agreement with the experimental data than NRT-dpa; this is similar to the displacement cross sections of copper. From the measurements of damage recovery of the accumulated defects in tungsten through isochronal annealing, which is related to the defect concentration of the sample, approximately 20% of the damage was recovered at 60 K. This trend was similar to those observed in other experimental results for reactor neutrons.
Intermediate energy proton irradiation: Rapid, high-fidelity materials testing for fusion and fission energy systems
