Hadron Energy Resolution of the ICAL Detector

2011 ◽  
Author(s):  
Anushree Ghosh ◽  
B. S. Acharya ◽  
Maury Goodman ◽  
Naba K. Mondal
Keyword(s):  
Energy Resolution ◽  
Hadron Energy

Present status and perspective of dual-readout calorimetry for future accelerators

2020 ◽  
Vol 35 (15n16) ◽  
pp. 2041012 ◽  
Author(s):  
Massimiliano Antonello ◽  
Massimo Caccia ◽  
Romualdo Santoro ◽  
Roberto Ferrari ◽  
Gabriella Gaudio ◽  
...  
Keyword(s):  
Energy Resolution ◽  
Present Status ◽  
Energy Deposition ◽  
Cherenkov Light ◽  
Particle Identification ◽  
Hadronic Shower ◽  
Hadron Energy ◽  
Calorimetric Technique ◽  
Material Choice ◽  
Electromagnetic Component

Dual-readout calorimetry is a calorimetric technique able to overcome the noncompensation limit by simultaneously detecting scintillation and Cherenkov light. Scintillating photons provide a signal related to the energy deposition in the calorimeter by all ionising particles while Cherenkov photons provide a signal almost exclusively related to the electromagnetic component in the hadronic shower. Fluctuations among the electromagnetic and non-electromagnetic component of hadronic induced showers represent the major limit to reach resolutions needed in experiments at future leptonic colliders. In a dual-readout calorimeter, by looking at the two independent signals, it is possible to measure, event by event, the electromagnetic fraction and to correctly reconstruct the primary hadron energy. Applications of the dual-readout method in fiber-sampling calorimetry have been shown to be able to provide single hadron detection with an energy resolution around [Formula: see text], electromagnetic resolution around [Formula: see text], excellent particle identification capability, resulting in one of the most promising option for future leptonic colliders. Status-of-art of the dual-readout calorimetry, as well as, perspective in the developments toward scalable solution for [Formula: see text] detectors are presented in this paper. This includes, study on the material choice, SiPM readout of the fibers, possible segmentation of the fibers to enhance particle ID capability.

scholarly journals Simulation studies of hadron energy resolution as a function of iron plate thickness at INO-ICAL

2014 ◽  
Vol 9 (09) ◽  
pp. T09003-T09003 ◽  
Author(s):  
S M Lakshmi ◽  
A Ghosh ◽  
M M Devi ◽  
D Kaur ◽  
S Choubey ◽  
...  
Keyword(s):  
Energy Resolution ◽  
Plate Thickness ◽  
Simulation Studies ◽  
Iron Plate ◽  
Hadron Energy

Use of LaB6 for a High Quality, Small Energy Spread Beam in an Electron Velocity Spectrometer

1976 ◽  
Vol 34 ◽  
pp. 534-535 ◽  
Author(s):  
P. E. Batson ◽  
C. H. Chen ◽  
J. Silcox
Keyword(s):  
High Temperature ◽  
Energy Resolution ◽  
Electron Velocity ◽  
Electronic Excitations ◽  
Small Energy ◽  
Small Intensity ◽  
Good Energy ◽  
Spectrometer System ◽  
Electron Energy Loss ◽  
Very High

Electron energy loss experiments combined with microscopy have proven to be a valuable tool for the exploration of the structure of electronic excitations in materials. These types of excitations, however, are difficult to measure because of their small intensity. In a usual situation, the filament of the microscope is run at a very high temperature in order to present as much intensity as possible at the specimen. This results in a degradation of the ultimate energy resolution of the instrument due to thermal broadening of the electron beam.We report here observations and measurements on a new LaB filament in a microscope-velocity spectrometer system. We have found that, in general, we may retain a good energy resolution with intensities comparable to or greater than those available with the very high temperature tungsten filament. We have also explored the energy distribution of this filament.

An improved magnetic prism design for a transmission electron microscope energy filter

1978 ◽  
Vol 36 (1) ◽  
pp. 40-41 ◽  
Author(s):  
John W. Andrew ◽  
F.P. Ottensmeyer ◽  
E. Martell
Keyword(s):  
Energy Resolution ◽  
Symmetry Plane ◽  
Fringe Field ◽  
Focal Distance ◽  
Electron Trajectories ◽  
Focusing Effect ◽  
Transmission Electron ◽  
Path Lengths ◽  
Electron Microscopes ◽  
Focusing Properties

Energy selecting electron microscopes of the Castaing-Henry prism-mirror-prism design suffer from a loss of image and energy resolution with increasing field of view. These effects can be qualitatively understood by examining the focusing properties of the prism shown in Fig. 1. A cone of electrons emerges from the entrance lens crossover A and impinges on the planar face of the prism. The task of the prism is to focus these electrons to a point B at a focal distance f2 from the side of the prism. Electrons traveling in the plane of the diagram (i.e., the symmetry plane of the prism) are focused toward point B due to the different path lengths of different electron trajectories in the triangularly shaped magnetic field. This is referred to as horizontal focusing; the better this focusing effect the better the energy resolution of the spectrometer. Electrons in a plane perpendicular to the diagram and containing the central ray of the incident cone are focused toward B by the curved fringe field of the prism.

ELNES of Iron Compounds

1990 ◽  
Vol 48 (2) ◽  
pp. 28-29
Author(s):  
Hiroki Kurata ◽  
Kazuhiro Nagai ◽  
Seiji Isoda ◽  
Takashi Kobayashi
Keyword(s):  
Energy Loss ◽  
Metal Ions ◽  
Energy Resolution ◽  
Transition Metal Oxides ◽  
Local Symmetry ◽  
Iron Compounds ◽  
Fine Structures ◽  
Electron Energy Loss ◽  
Fe Ions ◽  
Electron Energy Loss Spectra

Electron energy loss spectra of transition metal oxides, which show various fine structures in inner shell edges, have been extensively studied. These structures and their positions are related to the oxidation state of metal ions. In this sence an influence of anions coordinated with the metal ions is very interesting. In the present work, we have investigated the energy loss near-edge structures (ELNES) of some iron compounds, i.e. oxides, chlorides, fluorides and potassium cyanides. In these compounds, Fe ions (Fe2+ or Fe3+) are octahedrally surrounded by six ligand anions and this means that the local symmetry around each iron is almost isotropic.EELS spectra were obtained using a JEM-2000FX with a Gatan Model-666 PEELS. The energy resolution was about leV which was mainly due to the energy spread of LaB6 -filament. The threshole energies of each edges were measured using a voltage scan module which was calibrated by setting the Ni L3 peak in NiO to an energy value of 853 eV.

Parallel Detection of Electron Energy Loss Spectra in Direct Mode

1990 ◽  
Vol 48 (2) ◽  
pp. 82-83
Author(s):  
Eckhard Quandt ◽  
Stephan laBarré ◽  
Andreas Hartmann ◽  
Heinz Niedrig
Keyword(s):  
Energy Loss ◽  
Electron Energy ◽  
Energy Resolution ◽  
Large Angle ◽  
Maximum Energy ◽  
Semiconductor Detectors ◽  
Parallel Detection ◽  
Photodiode Arrays ◽  
Electron Energy Loss ◽  
Electron Energy Loss Spectra

Due to the development of semiconductor detectors with high spatial resolution -- e.g. charge coupled devices (CCDs) or photodiode arrays (PDAs) -- the parallel detection of electron energy loss spectra (EELS) has become an important alternative to serial registration. Using parallel detection for recording of energy spectroscopic large angle convergent beam patterns (LACBPs) special selected scattering vectors and small detection apertures lead to very low intensities. Therefore the very sensitive direct irradiation of a cooled linear PDA instead of the common combination of scintillator, fibre optic, and semiconductor has been investigated. In order to obtain a sufficient energy resolution the spectra are optionally magnified by a quadrupole-lens system.The detector used is a Hamamatsu S2304-512Q linear PDA with 512 diodes and removed quartz-glas window. The sensor size is 13 μm ∗ 2.5 mm with an element spacing of 25 μm. Along with the dispersion of 3.5 μm/eV at 40 keV the maximum energy resolution is limited to about 7 eV, so that a magnification system should be attached for experiments requiring a better resolution.

Measurement of the energy resolution of silicon X-ray detectors by spectra at absorption edges

2019 ◽  
pp. 65-68
Author(s):  
S. M. Osadchii ◽  
A. A. Petukhov ◽  
V. B. Dunin
Keyword(s):  
Energy Resolution ◽  
X Ray ◽  
Absorption Edges

Advanced approach to estimation scintillator energy resolution

2020 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Energy Resolution

Fluctuations

2018 ◽  
Author(s):  
Richard Wigmans
Keyword(s):  
Energy Dependence ◽  
Energy Resolution ◽  
Practical Importance ◽  
Shower Particle ◽  
Formation Processes ◽  
Instrumental Effects ◽  
Important Type ◽  
High Energies ◽  
Different Types ◽  
Electromagnetic Component

The energy resolution, i.e. the precision with which the energy of a showering particle can be measured, is one of the most important characteristics of a calorimeter. This resolution is determined by fluctuations in the absorption and signal formation processes. In this chapter, the different types of fluctuations that may play a role are examined, and their relative practical importance is addressed. Sources of fluctuations include fluctuations in the number of signal quanta, sampling fluctuations, fluctuations in shower leakage, as well as a variety of instrumental effects. Since the energy dependence of the different types of fluctuations is not the same, different types of fluctuations may dominate the energy resolution at low and and at high energies. An important type of fluctuations is part of the non-compensation phenomena. It concerns fluctuations in the strength of the electromagnetic component of hadronic showers. The effects of these fluctuations, which typically dominate the energy resolution for hadron and jet detection, are examined in detail. In sampling calorimeters, one particular shower particle may sometimes have catastrophic effects on the calorimeter performance. Several examples of such cases are discussed.

Analysis and Interpretation of Test Beam Data

2018 ◽  
Author(s):  
Richard Wigmans
Keyword(s):  
Energy Resolution ◽  
Particle Physics ◽  
Particle Beam ◽  
Test Beam ◽  
Term Energy ◽  
The Many ◽  
Physics Experiment ◽  
The Way

This chapter describes some of the many pitfalls that may be encountered when developing the calorimeter system for a particle physics experiment. Several of the examples chosen for this chapter are based on the author’s own experience. Typically, the performance of a new calorimeter is tested in a particle beam provided by an accelerator. The potential pitfalls encountered in correctly assessing this performance both concern the analysis and the interpretation of the data collected in such tests. The analysis should be carried out with unbiased event samples. Several consequences of violating this principle are illustrated with practical examples. For the interpretation of the results, it is very important to realize that the conditions in a testbeam are fundamentally different than in practice. This has consequences for the meaning of the term “energy resolution”. It is shown that the way in which the results of beam tests are quoted may create a misleading impression of the quality of the tested instrument.

Sign in / Sign up

Export Citation Format

Share Document