Metamodelling with artificial neural networks by using high performance computing infrastructures

2016 ◽  
Author(s):  
Lukasz Rauch ◽  
Grzegorz Górecki ◽  
Maciej Pietrzyk ◽  
Piotr Macioł
2017 ◽  
Author(s):  
◽  
D. Flores

Artificial neural networks (ANN) are a computational method that has been widely used to solve complex problems and carry out predictions on nonlinear systems. Multilayer perceptron artificial neural networks were used to predict the physiological response that would be obtained by adding a specific concentration of digoxin to Tivela stultorum hearts, this organism is a model for testing cardiac drugs that pretends to be used in humans. The MLPANN inputs were weight, volume, length, and width of the heart, digoxin concentration and volume used for diluting digoxin, and maximum contraction, minimum contraction, filling time, and heart rate before adding digoxin, and the outputs were the maximum contraction, minimum contraction, filling time, and heart rate that would be obtained after adding digoxin to the heart. ANNs were trained, validated, and tested with the results obtained from the in vivo experiments. To choose the optimal network, the smallest square mean error value was used. Perceptrons obtained a high performance and correlation between predicted and calculated values, except in the case of the filling time output. Accurate predictions of the T. stultorum clams cardioactivity were obtained when a specific concentration of digoxin was added using ANNs with one hidden layer; this could be useful as a tool to facilitate laboratory experiments to test digoxin effects.


2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Ayse Gokcen Kavaz ◽  
Burak Barutcu

This paper proposes a method for sensor validation and fault detection in wind turbines. Ensuring validity of sensor measurements is a significant part in overall condition monitoring as sensor faults lead to incorrect results in monitoring a system’s state of health. Although identifying abrupt failures in sensors is relatively straightforward, calibration drifts are more difficult to detect. Therefore, a detection and isolation technique for sensor calibration drifts on the purpose of measurement validation was developed. Temperature sensor measurements from the Supervisory Control and Data Acquisition system of a wind turbine were used for this aim. Low output rate of the measurements and nonlinear characteristics of the system drive the necessity to design an advanced fault detection algorithm. Artificial neural networks were chosen for this purpose considering their high performance in nonlinear environments. The results demonstrate that the proposed method can effectively detect existence of calibration drift and isolate the exact sensor with faulty behaviour.


Sign in / Sign up

Export Citation Format

Share Document