Flexural properties untreated and treated kenaf fiber reinforced polypropylene composites

Nowadays natural fiber and polymer matrix are being extensively used as alternatives in producing furniture like ceiling, floor and etc. to fulfill society demand instead of environmental friendly and saving cost. The objective of this study is to investigate the effects of maleic anhydride grafted polypropylene (MAPP) as a coupling agent for reinforcement between kenaf fiber (KF) and polypropylene (PP). The ratio of MAPP between 3% and 5% was observed to determine which composition ratio is better. The tensile strength for both 30% KF and 40% KF was treated through the alkali treatment process with 5% sodium hydroxide (NaOH). Kenaf fiber reinforced polypropylene (PP/KF) composites were melt blended and then used hydraulic molding test press machine for characterization to observe their tensile strengths by measuring their threshold. Tensile test was carried out to determine the tensile stresses of the composite at the best composition ratio of kenaf fiber that are 30% KF and 40% KF instead of MAPP ratio. The result shows 40% KF (5% MAPP) lead to better tensile performance compared to 40% KF (3% MAPP), 30% KF (5% MAPP) and 30% KF (3% MAPP). Meanwhile, Scanning electron microscopy (SEM) is used to observe the morphological comparison between untreated KF and treated KF as well as PP/KF. The good interfacial bonding between KF and PP was 5% MAPP rather than 3% MAPP due to the optimum strength received. Overall 5% MAPP with 40% PP/KF had shown the best result compared to others with the estimated tensile strength value of 21.38 MPa.

Download Full-text

Tensile and Flexural Properties of Silica Nanoparticles Modified Unidirectional Kenaf and Hybrid Glass/Kenaf Epoxy Composites

Polymers ◽

10.3390/polym12112733 ◽

2020 ◽

Vol 12 (11) ◽

pp. 2733 ◽

Cited By ~ 2

Author(s):

Napisah Sapiai ◽

Aidah Jumahat ◽

Mohammad Jawaid ◽

Mohamad Midani ◽

Anish Khan

Keyword(s):

Mechanical Properties ◽

Silica Nanoparticles ◽

Polymer Composites ◽

Fiber Reinforced Polymer ◽

Flexural Properties ◽

Fiber Reinforced ◽

Kenaf Fiber ◽

Composite Systems ◽

Reinforced Polymer ◽

Fiber Reinforced Polymer Composites

This paper investigates the influence of silica nanoparticles on the mechanical properties of a unidirectional (UD) kenaf fiber reinforced polymer (KFRP) and hybrid woven glass/UD kenaf fiber reinforced polymer (GKFRP) composites. In this study, three different nanosilica loadings, i.e., 5, 13 and 25 wt %, and untreated kenaf fiber yarns were used. The untreated long kenaf fiber yarn was wound onto metal frames to produce UD kenaf dry mat layers. The silane-surface-treated nanosilica was initially dispersed into epoxy resin using a high-vacuum mechanical stirrer before being incorporated into the UD untreated kenaf and hybrid woven glass/UD kenaf fiber layers. Eight different composite systems were made, namely KFRP, 5 wt % nanosilica in UD kenaf fiber reinforced polymer composites (5NS-KFRP), 13% nanosilica in UD kenaf fiber reinforced polymer composites (13NS-KFRP), 25 wt % nanosilica in UD kenaf fiber reinforced polymer composites (25NS-KFRP), GKFRP, 5 wt % nanosilica in hybrid woven glass/UD kenaf fiber reinforced polymer composites (5NS-GKFRP), 13 wt % nanosilica in hybrid woven glass/UD kenaf fiber reinforced polymer composites (13NS-GKFRP) and 25 wt % nanosilica in hybrid woven glass/UD kenaf fiber reinforced polymer composites (25NS-GKFRP). All composite systems were tested in tension and bending in accordance with ASTM standards D3039 and D7264, respectively. Based on the results, it was found that the incorporation of homogeneously dispersed nanosilica significantly improved the tensile and flexural properties of KFRP and hybrid GKFRP composites even at the highest loading of 25 wt % nanosilica. Based on the scanning electron microscopy (SEM) examination of the fractured surfaces, it is suggested that the silane-treated nanosilica exhibits good interactions with epoxy and the kenaf and glass fibers. Therefore, the presence of nanosilica in an epoxy polymer contributes to a stiffer matrix that, effectively, enhances the capability of transferring a load to the fibers. Thus, this supports greater loads and improves the mechanical properties of the kenaf and hybrid composites.

Download Full-text