scholarly journals Prediction on flexural strength of encased composite beam with cold-formed steel section

2017 ◽  
Author(s):  
Khadavi ◽  
M. M. Tahir
Keyword(s):  
Flexural Strength ◽  
Composite Beam ◽  
Cold Formed Steel ◽  
Steel Section

scholarly journals Structural aspects of cold-formed steel section designed as U-shape composite beam

2017 ◽  
Author(s):  
Anis Saggaff ◽  
Mahmood Md. Tahir ◽  
Mohammadamin Azimi ◽  
T. M. Alhajri
Keyword(s):  
Composite Beam ◽  
Cold Formed Steel ◽  
Structural Aspects ◽  
Steel Section

Finite Element Modelling of Innovative Precast Cold-Formed Steel Ferrocement as Composite Beam

2015 ◽  
Vol 752-753 ◽  
pp. 539-543 ◽  
Author(s):  
Anis Saggaff ◽  
Talal Alhajri ◽  
M. Ismail ◽  
Khaled Alenezi ◽  
Mohamad Ragae
Keyword(s):  
Finite Element ◽  
Composite Beam ◽  
Finite Element Modelling ◽  
Close Agreement ◽  
Concrete Slab ◽  
Experimental Tests ◽  
Composite Beams ◽  
Element Modelling ◽  
Cold Formed Steel ◽  
Steel Section

This paper describes Finite Element Modeling (FEM) of a composite beam comprised of cold formed steel section and concrete slab designed as ferrocement. Software (ANSYS, version 11) was adopted to carry out the modeling of the proposed composite beam. Experimental tests were also been carried out for three simple supported composite beams. The proposed innovative precast composite beam specimens of cold-formed steel lipped channel sections (CFS) connected with ferrocement slab were tested till failure, under two point loads positioned atquarter length of the span from support. The results showed that close agreement was observed between the FEM and experimental results for ultimate loads and load-deflection responses.

scholarly journals Behaviour of rebar shear connector in a push test for composite beam with cold-formed steel section

2019 ◽  
Vol 620 ◽  
pp. 012037
Author(s):  
Achmad Abraham S Armo ◽  
Anis Saggaff ◽  
Mahmood Md Tahir ◽  
Shek Poi Ngian ◽  
Arizu Sulaiman ◽  
...  
Keyword(s):  
Composite Beam ◽  
Shear Connector ◽  
Cold Formed Steel ◽  
Steel Section

Towards Light-Weight Composite Construction: Innovative Shear Connector for Composite Beams

2013 ◽  
Vol 351-352 ◽  
pp. 427-433 ◽  
Author(s):  
S.O. Bamaga ◽  
M.Md. Tahir
Keyword(s):  
Composite Beam ◽  
Concrete Slab ◽  
Low Cost ◽  
Construction Materials ◽  
Composite Beams ◽  
Shear Connectors ◽  
Steel Sections ◽  
Speed Up ◽  
Cold Formed Steel ◽  
Steel Section

Introducing low cost housing is one of the challenges face civil engineers now-days. Using lightweight construction materials i.e. cold formed steel sections is an alternate solution to overcome the challenge. In this study, a lightweight composite beam was introduced. It consists of cold formed steel section and profiled concrete slab. Experimental push tests were conducted to investigate the ductility and strength capacities of new and innovative shear connectors. The shear connectors were easy to form and give advantages to speed up the fabrication process of the proposed composite beam. The shear connectors showed large deformation and strength capacities. It is concluded that the proposed shear connectors could be used for lightweight composite beams.

Economic Aspects of Cold Formed Steel Section Designed as Composite Beam

2018 ◽  
Vol 24 (6) ◽  
pp. 4318-4321 ◽  
Author(s):  
Khadavi ◽  
M. M Tahir ◽  
S. P Ngian ◽  
A Sulaiman ◽  
A Bakri
Keyword(s):  
Composite Beam ◽  
Economic Aspects ◽  
Cold Formed Steel ◽  
Steel Section

STRENX SECTION 900

Alloy Digest ◽  
2017 ◽  
Vol 66 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Strength ◽  
Bend Strength ◽  
Bend Channel ◽  
Cold Formed Steel ◽  
The Common ◽  
Hot Rolled ◽  
Common Shape ◽  
Minimum Yield ◽  
Steel Section

Abstract Strenx Section 900 is a cold-formed steel section made of hot-rolled, high-strength steel with a minimum yield strength of 900 MPa (131 ksi). Its high strength combined with naturally stiff form enables construction of stronger and lighter structures. The common shape is a U-bend channel. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, machining, and joining. Filing Code: SA-792. Producer or source: SSAB Swedish Steel Inc..

Behaviour of Composite Beam with Trapezoid Web Profiled Steel Section in Sub-Assemblage Frame

2011 ◽  
Vol 250-253 ◽  
pp. 1271-1274
Author(s):  
Saggaff Anis ◽  
M.Md. Tahir ◽  
Arizu Sulaiman ◽  
Poi Ngian Shek ◽  
Cher Siang Tan ◽  
...  
Keyword(s):  
Composite Beam ◽  
Loading Capacity ◽  
End Plate ◽  
Corrugated Web ◽  
Extended End Plate ◽  
The Moment ◽  
Composite Connections ◽  
Steel Section

The objective of this paper is to present the behaviour of composite beam using Trapezoid Web Profiled (TWP) steel section by determining the moment resistance and the deflection of the beam with composite and non-composite connections. The TWP steel section is a built up section where the flange is of S355 steel section and the corrugated web of S275 steel section. Three full scales testing setting-up as sub-assemblage frame have been carried out. It was concluded that the use of composite connection and extended end-plate has reduced significantly the deflection and has significantly increased the loading capacity of composite beam.

Experimental Study on Seismic Performance of Ridge Joint of Double C Steel under Cyclic Loading

2011 ◽  
Vol 243-249 ◽  
pp. 1435-1438 ◽  
Author(s):  
Ming Chen ◽  
Yang Sun ◽  
Bing Qian Pi
Keyword(s):  
Experimental Study ◽  
Cyclic Loading ◽  
Seismic Performance ◽  
Engineering Application ◽  
Steel Structure ◽  
Energy Performance ◽  
Gusset Plate ◽  
Cold Formed Steel ◽  
Bolt Spacing ◽  
Steel Section

The double C steel section is made of two C steels with gusset plate through bolts. A ridge joint of double C steel is studied through experiment under cyclic loading in this paper. Through the four specimens with different gusset-plate’s thickness and bolt spacing, we analyze the effect of the gusset-plate’s thickness and bolt spacing on stiffness, ductility and energy performance. At last we recommend the suitable gusset-plate’s thickness. The results can give a reference to the engineering application of cold-formed steel structure.

Sign in / Sign up

Export Citation Format

Share Document