scholarly journals Investigation of hindwing folding in ladybird beetles by artificial elytron transplantation and microcomputed tomography

2017 ◽  
Vol 114 (22) ◽  
pp. 5624-5628 ◽  
Author(s):  
Kazuya Saito ◽  
Shuhei Nomura ◽  
Shuhei Yamamoto ◽  
Ryuma Niiyama ◽  
Yoji Okabe
Keyword(s):  
High Mobility ◽  
Ventral Surface ◽  
Microcomputed Tomography ◽  
Transformation Mechanism ◽  
Engineering Applications ◽  
Folding Process ◽  
3D Shape ◽  
Ladybird Beetles ◽  
Transformation Systems ◽  
Wing Folding

Ladybird beetles are high-mobility insects and explore broad areas by switching between walking and flying. Their excellent wing transformation systems enabling this lifestyle are expected to provide large potential for engineering applications. However, the mechanism behind the folding of their hindwings remains unclear. The reason is that ladybird beetles close the elytra ahead of wing folding, preventing the observation of detailed processes occurring under the elytra. In the present study, artificial transparent elytra were transplanted on living ladybird beetles, thereby enabling us to observe the detailed wing-folding processes. The result revealed that in addition to the abdominal movements mentioned in previous studies, the edge and ventral surface of the elytra, as well as characteristic shaped veins, play important roles in wing folding. The structures of the wing frames enabling this folding process and detailed 3D shape of the hindwing were investigated using microcomputed tomography. The results showed that the tape spring-like elastic frame plays an important role in the wing transformation mechanism. Compared with other beetles, hindwings in ladybird beetles are characterized by two seemingly incompatible properties: (i) the wing rigidity with relatively thick veins and (ii) the compactness in stored shapes with complex crease patterns. The detailed wing-folding process revealed in this study is expected to facilitate understanding of the naturally optimized system in this excellent deployable structure.

Geometry-Based Thick Origami Simulation

2020 ◽  
Vol 143 (6) ◽  
Author(s):  
Tsz-Ho Kwok
Keyword(s):  
Three Dimensional ◽  
Geometric Design ◽  
Experimental Results ◽  
Engineering Applications ◽  
3D Shape ◽  
Folding Paper ◽  
Geometric Simulation ◽  
Geometric Formulation

Abstract Origami is the art of creating a three-dimensional (3D) shape by folding paper. It has drawn much attention from researchers, and the designs that origami has inspired are used in various engineering applications. Most of these designs are based on familiar origami patterns and their known deformations, but origami patterns were originally intended for materials of near-zero thickness, primarily paper. To use the designs in engineering applications, it is necessary to simulate origami in a way that enables designers to explore and understand the designs while taking the thickness of the material to be folded into account. Because origami is primarily a problem in geometric design, this paper develops a geometric simulation for thick origami. The actuation, constraints, and assignment of mountain and valley folds in origami are also incorporated into the geometric formulation. The experimental results show that the proposed method is efficient and accurate. The method can successfully simulate a flat-foldable degree-four vertex, two different action origami, the bistable property of a waterbomb base, and the elasticity of non-rigid origami panels.

Geometric Simulation for Thick Origami

2019 ◽  
Author(s):  
Tsz-Ho Kwok
Keyword(s):  
Design Problem ◽  
Three Dimensional ◽  
Experimental Results ◽  
Engineering Applications ◽  
Research Attention ◽  
3D Shape ◽  
Mountain Valley ◽  
Geometry Design ◽  
Geometric Simulation ◽  
Geometric Formulation

Abstract Origami is an art that creates a three-dimensional (3D) shape only by folding. This capability has drawn much research attention recently, and its applied or inspired designs are utilized in various engineering applications. Most current designs are based on the existing origami patterns and their known deformation, but origami patterns are universally designed for zero-thickness like a paper. To extend the designs for engineering applications, simulation of origami is needed to help designers explore and understand the designs, and the simulation must take the material thickness into account. With the observation that origami is mainly a geometry design problem, this paper develops a geometric simulation for thick origami, similar to a pseudo-physics approach. The actuation, constraints, and mountain/valley assignments of origami are also incorporated in the geometric formulation. Experimental results show that the proposed method is efficient and accurate. It can simulate successfully the bistable property of a waterbomb base, two different action origami, and the elasticity of origami panels when they are not rigid.

scholarly journals Self-locking degree-4 vertex origami structures

2016 ◽  
Vol 472 (2195) ◽  
pp. 20160682 ◽  
Author(s):  
Hongbin Fang ◽  
Suyi Li ◽  
K. W. Wang
Keyword(s):  
Scientific Knowledge ◽  
State Of The Art ◽  
Single Component ◽  
Structural Systems ◽  
Proof Of Concept ◽  
Engineering Applications ◽  
Comprehensive Investigation ◽  
Folding Process ◽  
First Time ◽  
Systematic Framework

A generic degree-4 vertex (4-vertex) origami possesses one continuous degree-of-freedom for rigid folding, and this folding process can be stopped when two of its facets bind together. Such facet-binding will induce self-locking so that the overall structure stays at a pre-specified configuration without additional locking elements or actuators. Self-locking offers many promising properties, such as programmable deformation ranges and piecewise stiffness jumps, that could significantly advance many adaptive structural systems. However, despite its excellent potential, the origami self-locking features have not been well studied, understood, and used. To advance the state of the art, this research conducts a comprehensive investigation on the principles of achieving and harnessing self-locking in 4-vertex origami structures. Especially, for the first time, this study expands the 4-vertex structure construction from single-component to dual-component designs and investigates their self-locking behaviours. By exploiting various tessellation designs, this research discovers that the dual-component designs offer the origami structures with extraordinary attributes that the single-component structures do not have, which include the existence of flat-folded locking planes, programmable locking points and deformability. Finally, proof-of-concept experiments investigate how self-locking can effectively induce piecewise stiffness jumps. The results of this research provide new scientific knowledge and a systematic framework for the design, analysis and utilization of self-locking origami structures for many potential engineering applications.

scholarly journals Microcomputed Tomography Characterization of Neovascularization in Bone Tissue Engineering Applications

2008 ◽  
Vol 14 (3) ◽  
pp. 295-306 ◽  
Author(s):  
Simon Young ◽  
James D. Kretlow ◽  
Charles Nguyen ◽  
Alex G. Bashoura ◽  
L. Scott Baggett ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Microcomputed Tomography ◽  
Engineering Applications

Scanning electron microscopy of the integument of schistosoma rodhaini

1986 ◽  
Vol 44 ◽  
pp. 132-133
Author(s):  
P. Evers ◽  
C. Schutte ◽  
C. D. Dettman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Oral Sucker ◽  
Adult Male ◽  
Dorsal Surface ◽  
Ventral Surface ◽  
Sensory Receptors ◽  
East African ◽  
Dorsal Midline ◽  
Scanning Electron

S.rodhaini (Brumpt 1931) is a parasite of East African rodents which may possibly hybridize with the human schistosome S. mansoni. The adult male at maturity measures approximately 3mm long and possesses both oral and ventral suckers and a marked gynaecophoric canal. The oral sucker is surrounded by a ring of sensory receptors with a large number of inwardly-pointing spines set into deep sockets occupying the bulk of the ventral surface of the sucker. Numbers of scattered sensory receptors are found on both dorsal and ventral surfaces of the head (Fig. 1) together with two conspicuous rows of receptors situated symmetrically on each side of the midline. One row extends along the dorsal surface of the head midway between the dorsal midline and the lateral margin.

Practical electron tomography

1995 ◽  
Vol 53 ◽  
pp. 742-743
Author(s):  
C.L. Woodcock
Keyword(s):  
Electron Tomography ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
3D Shape ◽  
Computational Resources ◽  
Shape Of Particles

Despite the potential of the technique, electron tomography has yet to be widely used by biologists. This is in part related to the rather daunting list of equipment and expertise that are required. Thanks to continuing advances in theory and instrumentation, tomography is now more feasible for the non-specialist. One barrier that has essentially disappeared is the expense of computational resources. In view of this progress, it is time to give more attention to practical issues that need to be considered when embarking on a tomographic project. The following recommendations and comments are derived from experience gained during two long-term collaborative projects.Tomographic reconstruction results in a three dimensional description of an individual EM specimen, most commonly a section, and is therefore applicable to problems in which ultrastructural details within the thickness of the specimen are obscured in single micrographs. Information that can be recovered using tomography includes the 3D shape of particles, and the arrangement and dispostion of overlapping fibrous and membranous structures.

A TEM study of the effect of oxygen on nanocavity formation and precipitation in rapid - solidified Fe-16Ni-9Cr stainless steels

1994 ◽  
Vol 52 ◽  
pp. 700-701
Author(s):  
S. Wisutmethangoon ◽  
T. F. Kelly ◽  
J.E. Flinn
Keyword(s):  
Stainless Steels ◽  
High Mobility ◽  
Hot Extrusion ◽  
Extrusion Ratio ◽  
Gas Atomization ◽  
Cavity Formation ◽  
Nucleation Sites ◽  
Heat Treated ◽  
Different Types ◽  
Effect Of Oxygen

Vacancies are introduced into the crystal phase during quenching of rapid solidified materials. Cavity formation occurs because of the coalescence of the vacancies into a cluster. However, because of the high mobility of vacancies at high temperature, most of them will diffuse back into the liquid phase, and some will be lost to defects such as dislocations. Oxygen is known to stabilize cavities by decreasing the surface energy through a chemisorption process. These stabilized cavities, furthermore, act as effective nucleation sites for precipitates to form during aging. Four different types of powders with different oxygen contents were prepared by gas atomization processing. The atomized powders were then consolidated by hot extrusion at 900 °C with an extrusion ratio 10,5:1. After consolidation, specimens were heat treated at 1000 °C for 1 hr followed by water quenching. Finally, the specimens were aged at 600 °C for about 800 hrs. TEM samples were prepared from the gripends of tensile specimens of both unaged and aged alloys.

Sign in / Sign up

Export Citation Format

Share Document