Deployment - open-pollinated varieties, full-sib families and clones.

2009 ◽  
pp. 439-447 ◽  
Author(s):  
T. L. White ◽  
W. T. Adams ◽  
D. B. Neale
Keyword(s):  
Sib Families

Yield performance with heritability measurements of half sib families obtained from maize variety Azam

1970 ◽  
pp. 33-36
Author(s):  
Faizan Mahmood, Hidayat- Ur-Rahman, Nazir Ahmad ◽  
Fahim-ul- Haq ◽  
Samrin Gul, Quaid Hussain ◽  
Ammara Khalid ◽  
Touheed Iqbal ◽  
...  
Keyword(s):  
Grain Yield ◽  
Agronomic Traits ◽  
Heritability Estimate ◽  
Kernel Weight ◽  
Yield Performance ◽  
Grain Moisture ◽  
Maize Variety ◽  
Ear Height ◽  
Sib Families

This study evaluated the performance of 64 half sib families (HSF) derived from “Azam” variety of maize using partially balanced lattice square design with two replications. Data were recorded on grain yield and other agronomic traits. Observations showed difference in half-sib families for studied traits. Among the 64 half-sib families, minimum days to 50% tasseling (51 days) were observed for HS-49 while maximum (57 days) for HS-63. Minimum days to 50% silking (56 days) were counted for HS-6 while maximum (63 days) for HS-23. Minimum days to 50% anthesis (55 days) were counted for HS-1 and HS-6 while maximum (62 days) for HS-23. Similarly, minimum ASI (-2 days) were observed in HS-1, HS-15, HS-16, HS-28 and HS-63 while maximum (2 days) in HS-48. Minimum (60 cm) ear height was recorded for HS-11 and maximum (93.5 cm) for HS-28. Minimum fresh ear weight (1.3 kg) was weighted for HS-17 while maximum (3.2 kg) for HS-21. Grain moisture was recorded minimum (19.35 %) for HS-19 and maximum (31.25%) for HS-2. HS-42 showed minimum (28 g) 100 kernel weight while HS-5 showed maximum (47 g). Grain yield was minimum (2323 kg ha-1) for HS-17 and maximum (5742 kg ha-1) for HS-21. Maximum heritability estimate (0.92) was recorded for fresh ear weight, while minimum (0.41) was observed for ear height.

Prospection of genotypes resistant to black spot in half‐sib families of papaya

2021 ◽  
Author(s):  
J.T.B. Chagas ◽  
M. Vivas ◽  
R. Moraes ◽  
H.O. Francelino ◽  
T.S. Jorge ◽  
...  
Keyword(s):  
Black Spot ◽  
Sib Families

scholarly journals Selection of Eucalyptus camaldulensis Families for Sustainable Pulpwood Production by Means of Anatomical Characteristics

Forests ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 31
Author(s):  
Ikumi Nezu ◽  
Futoshi Ishiguri ◽  
Haruna Aiso ◽  
Sapit Diloksumpun ◽  
Jyunichi Ohshima ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
Fibre Diameter ◽  
Eucalyptus Camaldulensis ◽  
Principal Component ◽  
Wood Properties ◽  
Component Analysis ◽  
Pulp And Paper ◽  
Anatomical Characteristics ◽  
Diameter Fibre ◽  
Sib Families

Sustainable pulpwood production from fast-growing tree plantations is needed for pulp and paper industries. To increase the pulpwood production efficiency, the anatomical characteristics and derived-wood properties of 75 trees from 15 half-sib families of Eucalyptus camaldulensis Dehnh. planted in Thailand were investigated, and then the family was classified by suitability of wood as raw material for pulp and paper products using principal component analysis and clustering. The mean values of vessel diameter, vessel frequency, fibre diameter, fibre lumen diameter, and fibre wall thickness at 2 cm from the cambium were 128 µm, 16 no./mm2, 11.1 µm, 7.1 µm, and 1.88 µm, respectively. In addition, the Runkel ratio, Luce’s shape factor, flexibility coefficient, slenderness ratio, solids factor, and wall coverage ratio (i.e., derived-wood properties) were 0.53, 0.42, 0.64, 85.3, 68 × 103 µm3, and 0.34, respectively. Significant differences in fibre diameter, fibre lumen diameter, and Runkel ratio were found among families. Although significant differences among families were not found for other anatomical characteristics and derived-wood properties, the p-values obtained by an analysis of variance test ranged from 0.050 to 0.088. Based on the results of a principal component analysis and cluster analysis, 15 families were classified into four clusters with different expected pulp and paper characteristics. The suitability of wood from E. camaldulensis half-sib families for pulp and paper can be evaluated by principal component analysis using anatomical characteristics and physical properties as variables. Based on the results, desirable pulp and paper quality may be obtained through the selection of families from this species.

scholarly journals Biased Estimation of the Recombination Fraction Using Half-Sib Families and Informative Offspring

Genetics ◽  
2001 ◽  
Vol 157 (3) ◽  
pp. 1357-1367 ◽  
Author(s):  
L Gomez-Raya
Keyword(s):  
Recombination Fraction ◽  
Allele Frequencies ◽  
Likelihood Method ◽  
Simultaneous Estimation ◽  
Sampling Variance ◽  
Production Traits ◽  
Lod Score ◽  
Absolute Value ◽  
Sib Families ◽  
Map Distance

Abstract A maximum-likelihood method to estimate the recombination fraction and its sampling variance using informative and noninformative half-sib offspring is derived. Estimates of the recombination fraction are biased up to 20 cM when noninformative offspring are discarded. In certain scenarios, the sampling variance can be increased or reduced up to fivefold due to the bias in estimating the recombination fraction and the LOD score can be reduced up to 5 units when discarding noninformative offspring. Comparison of the estimates of recombination fraction, map distance, and LOD score when constructing a genetic map with 251 two-point linkage analyses and six families of Norwegian cattle was carried out to evaluate the implications of discarding noninformative offspring in practical situations. The average discrepancies in absolute value (average difference when using and neglecting noninformative offspring) were 0.0146, 1.64 cM, and 2.61 for the recombination fraction, map distance, and the LOD score, respectively. A method for simultaneous estimation of allele frequencies in the dam population and a transmission disequilibrium parameter is proposed. This method might account for the bias in estimating allele frequencies in the dam population when the half-sib offspring is selected for production traits.

scholarly journals Non-Destructive Assessment of Wood Stiffness in Scots Pine (Pinus sylvestris L.) and its Use in Forest Tree Improvement

Forests ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 491 ◽  
Author(s):  
Irena Fundova ◽  
Tomas Funda ◽  
Harry X. Wu
Keyword(s):  
Scots Pine ◽  
Growth Traits ◽  
Wood Quality ◽  
Genetic Correlations ◽  
Forest Tree ◽  
Wood Stiffness ◽  
Standing Trees ◽  
Genetic And Phenotypic Correlations ◽  
Sib Families ◽  
Using Data

Wood stiffness is an important wood mechanical property that predetermines the suitability of sawn timber for construction purposes. Negative genetic correlations between wood stiffness and growth traits have, however, been reported for many conifer species including Scots pine. It is, therefore, important that breeding programs consider wood stiffness and growth traits simultaneously. The study aims to (1) evaluate different approaches of calculating the dynamic modulus of elasticity (MOE, non-destructively assessed stiffness) using data from X-ray analysis (SilviScan) as a benchmark, (2) estimate genetic parameters, and (3) apply index selection. In total, we non-destructively measured 622 standing trees from 175 full-sib families for acoustic velocity (VEL) using Hitman and for wood density (DEN) using Resistograph and Pilodyn. We combined VEL with different wood densities, raw (DENRES) and adjusted (DENRES.TB) Resistograph density, Pilodyn density measured with (DENPIL) and without bark (DENPIL.B), constant of 1000 kg·m−3 (DENCONST), and SilviScan density (DENSILV), to calculate MOEs and compare them with the benchmark SilviScan MOE (MOESILV). We also derived Smith–Hazel indices for simultaneous improvement of stem diameter (DBH) and wood stiffness. The highest additive genetic and phenotypic correlations of the benchmark MOESILV with the alternative MOE measures (tested) were attained by MOEDENSILV (0.95 and 0.75, respectively) and were closely followed by MOEDENRES.TB (0.91 and 0.70, respectively) and MOEDENCONST and VEL (0.91 and 0.65, respectively for both). Correlations with MOEDENPIL, MOEDENPIL.B, and MOEDENRES were lower. Narrow-sense heritabilities were moderate, ranging from 0.39 (MOESILV) to 0.46 (MOEDENSILV). All indices revealed an opportunity for joint improvement of DBH and MOE. Conclusions: MOEDENRES.TB appears to be the most efficient approach for indirect selection for wood stiffness in Scots pine, although VEL alone and MOEDENCONST have provided very good results too. An index combining DBH and MOEDENRES.TB seems to offer the best compromise for simultaneous improvement of growth, fiber, and wood quality traits.

Evaluation of genetic markers for litter size in Meishan synthetic and Large White pigs

1996 ◽  
Vol 1996 ◽  
pp. 18-18
Author(s):  
O.I. Southwood ◽  
S. Hoste ◽  
T.H. Short ◽  
A.J. Mileham ◽  
D. Cuthbert-Heavens
Keyword(s):  
Litter Size ◽  
Fixed Effects ◽  
Oestrogen Receptor ◽  
Mixed Model ◽  
Receptor Gene ◽  
Large White ◽  
Service Type ◽  
Sib Families ◽  
Natural Service ◽  
Size Data

A significant relationship between the oestrogen receptor gene (ESR) and litter size has been detected in USA populations of Large White and a synthetic comprising 50% Meishan (Rothschild et al., 1995). Animals carrying two copies of the favourable allele (B) had an extra pig born per litter than those that did not have the allele. This paper reports on results observed in a UK 50% Meishan synthetic and four UK Large White lines.Litter size data from 50% Meishan synthetic (L93) full-sib females where more than one ESR genotype was segregating. Data were analysed using a mixed model with full relationships and including the fixed effects of season of farrowing, parity, ESR genotype (AA, AB or BB) and service type (AI or natural service). Heritiability and permanent environmental effects for litter size were assumed as 0.09 and 0.11, repectively. A total of 27 full-sib families were represented and included 62 sows and 139 litter records. Hypothesis testing used the option in PEST under a mixed model (Groeneveld et al., 1991).

A comparison of variation of Pseudotsuga menziesii seedlings from genetically defined and undefined sources

1989 ◽  
Vol 67 (3) ◽  
pp. 945-947 ◽  
Author(s):  
Jack Maze ◽  
Satindranath Banerjee
Keyword(s):  
Pseudotsuga Menziesii ◽  
Genetic Background ◽  
Complex Mixture ◽  
Growing Season ◽  
Population Variation ◽  
Mixed Genetic Background ◽  
Diverse Background ◽  
Group Variation ◽  
Sib Families

Leader lengths were compared for seedlings (i) from full-sib families and (ii) of mixed genetic background 12 times over their second growing season. We wished to examine whether the variation in genetically defined groups was equal to, or less than, that from a genetically diverse background. Aside from one time, there was no difference in within-group variation for full-sib seedlings and for those of mixed genetic background. When variation was not equal, it was one of the full-sib families that was the most variable. This indicates that the high within-population variation in Pseudotsuga menziesii reflects crossing between highly variable individuals and not a complex mixture of half-sib families.

scholarly journals Random model approach for QTL mapping in half-sib families

1999 ◽  
Vol 31 (4) ◽  
pp. 319 ◽  
Author(s):  
Mario L Martinez ◽  
Natascha Vukasinovic ◽  
Gene AE Freeman
Keyword(s):  
Qtl Mapping ◽  
Random Model ◽  
Sib Families ◽  
Model Approach
Sign in / Sign up

Export Citation Format

Share Document