Trinexapac-ethyl application time in the crop corn agronomic performance grown under different plant arrangements

Reduced row spacing promotes more uniform spatial distribution of plants in the field. However, the adoption of reduced row spacing only is possible with smaller plants, which may be obtained with the use of plant growth regulator. This study aimed to evaluate the agronomic performance of the first corn crop with Trinexapac-ethyl applied at the different plant development stages and grown under different row spacing, with the same plant population. The experiments were arranged in a split-plot randomized block design with four replications, with row spacing for the plots (0.45 and 0.90 m) and Trinexapac-ethyl (TE) application time to subplots (control without application, at the V3, V6, V9 and V12 phenological stages). The Trinexapacethyl application time interacted with row spacings changing the growth and yield performance of the corn crop. For 0.45 m spacing Trinexapac-ethyl application at V12 and for 0.90 m spacing application at V9 and V12 reduced plant height and ear height. Trinexapac-ethyl application at V9 for both row spacings changed the plant architecture without changing the ear length and grain yield.

Validation of Maize (Zea mays L.) Hybrids for the Study on Variability, Trait Association, and Path Analysis

The present investigation was conducted with nine genotypes in randomized block design during Rabi, 2019-20 at the instructional-cum-research farm, Assam Agricultural University, Jorhat. All the characters exhibited significant genotypic mean squares in analysis of variance except anthesis silking interval, kernel rows per ear and 100 kernel weights. High heritability coupled with high genetic advance was observed for the traits plant height, ear height, ears per plant, ear length, kernels per row, chlorophyll content, leaf area index 60 days after sowing (LAI 60 DAS), LAI 90 DAS, harvest index, grain yield per plant and grain yield per hectare. Significant genetic association of grain yield per plant and grain yield per hectare with days to 50% pollen shed, days to 50% silk, days to 100% dry husk, ear height, kernels per row, LAI 60DAS and LAI 90 DAS. Genotypic path analysis revealed that the characters, days to 50% silk, days to 100% dry husk, plant height, ears per plant, ear diameter and harvest index had the highest positive direct effects on grain yield per hectare while days to 50% pollen shed and ear height had the highest negative direct effect on grain yield per hectare. The hybrids namely, PAC 751, CP 333 and PAC 751 ELITE, were found to be the three best hybrids to possess a high estimate of desirable traits such as days to 50% pollen shed, days to 50% silk, days to 100% dry husk, plant height, ear height, ear diameter, leaf area index at 60 days after sowing, lea area index at 90 days after sowing, grain yield per plant and grain yield per hectare.

Potential of corn hybrids for fresh consumption

The objective of this work was to evaluate the potential of corn hybrids for grain productivity and fresh produce marketability in two crop seasons. The experiment applied the completely randomized block design with three replications, during 2013-14 and 2014-15 crops. Ten hybrids indicated for the Midwest region of Goiás state were used, namely 2B512PW, 2B587PW, 2B707PW, 30F35HR, 30F53YH, BRS1055, BM3061, P3646H and P3862YH. Hybrid AG1051 was used as control. The studied variables were ear height (EH), unhusked ear productivity (UEP), husked ear productivity (HEP), marketable ear productivity (MEP), marketable ear length (MEL), marketable ear diameter (MED), grain mass (GM), and gross revenue (GR). Records show that hybrid P3646H achieved results lower than the control in all the analyzed variables, regardless of the crop season, whereas hybrids 2B512PW, BRS1055 and P3862YH showed figures similar to AG1051 in 2013/14 crop and lower ones in 2014/15. Therefore, would not represent direct market competitors, as the control hybrid holds a significant share in the domestic market. Hybrids 2B587PW, 30F35HR, 30F53YH and BM3061 presented the greatest suitability for fresh corn consumption, as featured the highest number of favorable traits for that market.

Yield and forage quality in maize (Zea mays L.) inbred lines

Objective: To analyze the genetic diversity (agronomic attributes, forage yield, and fiber content) of 100 maize inbred lines and to identify genotypes with potential for the breeding of plants with the said traits. Design/methodology/approach: One-hundred maize inbred lines were evaluated in two environments, in a 10 x 10 complete block experimental design, with two repetitions. Days to male flowering, days to female flowering, ear height, plant height, stem diameter, green forage yield, neutral detergent fiber, and acid detergent fiber data were recorded. Results: Significant differences were observed in the environmental sources of variation and genotypes for all the traits evaluated. The first four components account for 81% of the total variation observed and the first two account for 66% of the variation. The variables which have the highest absolute value and which strongly influence the dispersion of the genotypes, as well as the formation of groups, were: plant height, forage yield, and acid detergent fiber (component one) and days to female flowering and days to male flowering (component two). Consequently, the genotypes were dispersed in four groups. Study limitations/implications: It was not possible to conduct genetic diversity studies using molecular markers. Findings/conclusions: The grouping pattern of inbred lines shows the genetic diversity present; this can be an important tool in genetic improvement programs aimed at obtaining hybrids with specific characteristics.

Agronomic performance of maize hybrids for forage production in the 2019/2020 harvest

Maize has great economic prominence in national and international agribusiness, being used for various purposes such as grain use and in the form of bulky (silage). This study aimed to evaluate the agronomic characteristics of twelve maize hybrids for silage production in Inconfidentes-MG. Twelve hybrids were used: 20A78PW, 2B512PW, 2B533PW, 2B688PW, 30F53LEPTERA, AG8740-PRO3, DKB345-PRO3, DKB363-PRO3, LG3055-PRO3, LG6036-PRO3, MAXIMUS-VIP3, and MG652PW. The treatments were implanted in a randomized block design (CBD) containing three repetitions. The experimental plots consisted of four lines of five meters in length and 0.8 m spacing between rows, with the two central lines as useful areas. The parameters evaluated were green matter productivity, dry matter productivity, plant height, ear height, average stalk thickness, cutting window, flowering, and cycle. The hybrids 20A78PW; 2B533PW; DKB345-PRO3, and DKB363-PRO3 presented the highest cut-off window values in relation to the others. LG3055-PRO3 hybrid presented the smallest cut-off window. The hybrids 30F53LEPTERA, AG8740, DKB345-PRO3, LG6036-PRO3, and MG652PW presented the highest plant height values. No statistical difference was observed between the hybrids for the variables: green matter productivity, ear height, and stalk thickness. Hybrids AG8740, DKB345-PRO3, LG6036-PRO3, and MG652PW obtained the highest dry matter productivity values. Hybrids 20A78PW, 2B533PW, DKB345-PRO3, and DKB363-PRO3 presented the lowest male and female flowering time. Hybrid DKB345-PRO3 stood out, showing great potential to be recommended and cultivated by silage producers.

Correlation, regression and cluster analyses on yield attributes and popping characteristics of popcorn (Zea mays L. everta) in derived savanna and rainforest agro-ecologies of Nigeria

<p class="042abstractstekst"><span lang="EN-US">Information on the genetic and agronomic relationship among the crop characters is important for the breeding programs. This study aimed at determining the relationship among grain yield, popping expansion and other agronomic characters in 19 popcorn lines evaluated in replicated trials at two locations. Correlation analysis was carried out to determine the relationship between agronomic traits while multiple stepwise regression analyses was used to determine the contribution of other agronomic traits to grain yield. Results showed that plant and ear heights as well as cob length exhibited positive and significant association with grain yield. Popping volume showed negative and significant association (-0.45**) with grain yield while 100-grain mass had a negative and significant correlation (-0.37**) with popping volume. Stepwise multiple regression analysis showed that ear height, cob length, plant aspect and 100-grain mass contributed a total of 53.66 % to variation in grain yield, with ear height contributing the highest portion (22.51 %). Cluster analysis grouped popcorn lines into four different clusters, where ‘Small Pearl Shaped’ and ‘Popcorn 33-1-Y’ belonged to cluster II and IV, respectively, showing how divergent they are and possible utilization for hybrid formation. Improvement for popcorn should focus on identifying lines with acceptable level of popping volume and improved on their grain yield and yield attributes.</span></p>

The correlation of variable affecting yield on anthocyanins corn

Variable importance under vegetative and generative stage for effecting of grain yield opv anthocyanins corn. Simple correlation and regression analysis has been conducted between grain yield as dependent variable (yi) with all independent variable (xi, i: 1,2,3,…,6) as vegetative and generative stage. Stepwise of multiple regression was be used for define of variable was more important to affecting of yield.The experiment were conducted in Maros and Bajeng experimental farm on rainy 2017, data has been collected as sample from 30 plants per se. Two blocks of experiment 17x25m were planting of with spacing 75x20 cm one plant per hole, length of plot 15 m. Fertilizer be applied with Urea-Ponska (300-200) kg/ha. Anthocyanin’s corn held to increase of human health. The origin of anthocyanins corn is from Mesoamerica it is a pigment that give color of purple to black may affect to anticipated of viral (virus), cholesterol, heart disease, obesity, and cancerThe result multiple regression shown that variable which is be increase of yield and significant different founded in Maros were plant height (x1), water content of seeds (x2), and ear height. (x5). Model: y:3.404+0.027x1+0.018x2-0.073x5, R2:0.645. In Bajeng shown that water content of seeds (x5), number of seeds per cob (x7), and 1000 seeds (x8), Model was yi=4.096-1.776x5+0.087x7+0.023x8; R2:0.92. In The two-location yield, be decrease if water content of seed was increase.

Implementation of partial diallel analysis to determine general combining ability and agronomic character genetic parameters of shade-tolerant maize lines

Information about combining ability and genetic parameters guide maize breeders in selecting parents and gene action of the desired trait. This study aims to determine the general combining ability of the yield characters of shading tolerant maize lines and the genetic parameters of their agronomic characters. This research was conducted at IP2TP Bajeng in December 2020-March 2021. The study was arranged in a randomized block design with three replications. The genotypes used were nine hybrids obtain from a partial diallelic (2x6). The results showed that line SHD3 showed good general ability for yield. High heritability values were shown by variables days to anthesis, days to silk, plant height, ear height, leaf length, leaf width, 100 grains weight and ear diameter.

Genetic analysis of low-n traits in maize (Zea mays L) using triple test cross

Low-N maize variety is developed for its ability to tolerate low nitrogen soil environment. This experiment was conducted to study the genetic implication of Low-N maize variety for grain yield and related traits under low nitrogen soil conditions triple test cross analysis. Inbred lines used for the study were generated from twelve low nitrogen tolerance open pollinated maize varieties after six generations of selfing. Two inbred lines along with their F1 were used as testers for ten inbred lines in a triple test cross pattern to generate 30 crosses. The 30 crosses, their parents and the testers to State University, Ado-Ekiti during 2017 planting season. The experimental design was a Randomized Complete Block Design (RCBD). Data were collected on plant height, ear height, days to 50% anthesis, days to 50% silking, incidence of curvularia leaf spot, blight, plant aspect, ear aspect, ear rot, stay green, cob per plant, ear weight, grain moisture content and grain yield. All data were subjected to analysis of variance and complete genetic estimates. Additive and dominants were significant (P < 0.05) for all traits; however, epitasis estimates were not significant for all the traits tested. The degree of dominance component indicated partial dominance for all the traits. Correlation coefficients for days to 50% anthesis and 50% silking, plant height, ear height, number of cobs per plant and grain yield were positive and significant (P < 0.05). Since both additive and dominance gene actions were important for low-N traits, the use of reciprocal recurrent selection procedure can be adopted in incorporating the trait into elite maize varieties.

THE EFFECT OF DIFFERENT SOWING TIMES ON FRESH EAR YIELD AND YIELD COMPONENTS IN SWEET CORN (ZEA MAYS L. SACCHARATA STURT.) VARIETIES

This study was carried out to investigate the effects of different sowing times on duration of tasselling, plant height, first ear height, ear length, ear diameter, number of ears per plant, fresh ear yield with husk, fresh ear yield unhusked, and marketable number of ears of different sweet corn (Zea mays L. saccharata Sturt.) varieties in Diyarbakır between the years of 2010-2012. The trial was conducted as split plots in randomised complete blocks with three replications. The main plots were sowing times, and the sub-plots were varieties. The trials were carried out at eight different sowing times (1 April, 15 April, 1 May, 15 May, 1 June, 15 June, 1 July and 15 July) with ‘Merit’, ‘Jubilee’, ‘Lumina’, ‘Vega’ and ‘Sakarya’ composite sweet corn varieties. From the variance analysis of the three-year combined average, the duration of tasselling, plant height, first ear height, ear length, ear diameter, number of ears per plant, fresh husked ear yield, fresh unhusked ear yield and marketable ear number were statistically significant for sowing times and varieties. According to the sowing time × variety interaction, except ears per plant and first ear height values, all other traits were significant. The fresh husked and unhusked ear yields varied between 8541.7-19396.8 kg ha-1 and 5065.0-13485.7 kg ha-1, respectively. The highest fresh husked and fresh unhusked ear yields were obtained from the 15 April sowing time of ‘Vega’ variety. The results state that optimal sowing dates for different varieties of sweet corn could be from 1 April to 1 May, and the most suitable variety to be planted is ‘Vega’ in Diyarbakır conditions.