Stability of substrate pH in container-grown crops is important for proper nutrient management. The objective of this research was to determine the pH buffering capacity of pine bark substrates as a function of particle size and compare those results to sphagnum peat. The weight equivalent of 100 cm3 for fine, medium, and coarse pine bark and sphagnum peat, either as a whole or partitioned into several particle size ranges, was placed in a 250-mL glass jar and filled with 100 mL of an acid or base solution ranging from 0 to 50 meq·L−1 in 10 meq·L−1 increments. After 24 hours, pH was measured. An experiment was also conducted in the greenhouse. The weight equivalent of 500 cm3 of sphagnum peat, fine pine bark, or coarse pine bark was filled into 10-cm plastic pots and irrigated with one of the following: tap water or 10 meq·L−1 of HCl, NaOH, H2SO4, or KHCO3 and with or without a water soluble fertilizer. Substrate pH was determined 4 and 8 weeks after potting using the pour-through method. In all experiments, sphagnum peat had less buffering capacity than pine bark against pH changes from acidic solutions, whereas pine bark had less buffering capacity than sphagnum peat to pH changes from basic solutions. Substrate pH buffering in pine bark increased with decreasing particle size, whereas pH buffering in sphagnum peat was less responsive to particle size. These results will help growers and substrate manufacturers understand how substrate components contribute to pH management during crop production.
pH Buffering in Pine Bark Substrates as a Function of Particle Size
