An experimental study has been conducted on the effect of high back pressure on the spray characteristics of a plain jet injector under coaxial high velocity air flow. The air pressures tested range from 1 to 16 atm, the range of air velocity is 60–120 m/s, the pressure drops of injector tested are 200–2000 kpa. Working fluid is water. Injector hole diameter is 0.5 mm. The key feature of the experiment is using a convergent-divergent nozzle to maintain a high air pressure inthe test chamber and at the same time to maintain a high velocity air flow in the atomization zone. Such an experimental arrangement totally eliminates air and droplets recirculation in the test chamber and problem related to slow droplet settling in a commonly used pressurized vessel for high back pressure atomization research. The results show that SMD decreases monotonicly with the increase of back pressure or air velocity, at different air velocities, the effect of air pressure is different. The drop size distribution parameter N in Rosin-Rammler distribution decreases slightly with increase of back pressure or air velocity.
Experimental Study on Atomization of Plain Jet Injector Under High Pressure Co-Axial Air Flow