Two-Dimensional Piston Ring Lubrication—Part II: Elastic Ring Consideration

1996 ◽  
Vol 39 (4) ◽  
pp. 870-880 ◽  
Author(s):  
Qingmin Yang ◽  
Theo G. Keith
Keyword(s):  
Piston Ring ◽  
Two Dimensional ◽  
Elastic Ring ◽  
Piston Ring Lubrication

Two-dimensional lubrication study of the piston ring pack

1998 ◽  
Vol 212 (3) ◽  
pp. 215-220 ◽  
Author(s):  
K Liu ◽  
Y. B. Xie ◽  
C. L. Gui
Keyword(s):  
Film Thickness ◽  
Piston Ring ◽  
Cylinder Wall ◽  
Asperity Contact ◽  
Two Dimensional ◽  
Oil Film ◽  
Secondary Motion ◽  
Piston Ring Pack ◽  
Ring Pack ◽  
Piston Ring Lubrication

Based on the two-dimensional average flow model and asperity contact model, a theoretical model for the non-axisymmetrical analysis of piston ring lubrication has been suggested in this paper. The two-dimensional distribution of oil-film thickness between the piston rings and cylinder wall is obtained. Results show that the oil-film thickness along the circumference is non-uniform. Starvation is also considered in the model. The effect of secondary motion of piston assemblies on the lubrication property of the piston ring pack has also been studied.

A mass-conserving algorithm for piston ring dynamical lubrication problems with cavitation

2018 ◽  
Vol 70 (1) ◽  
pp. 212-229 ◽  
Author(s):  
Zhenpeng He ◽  
Wenqin Gong ◽  
Weisong Xie ◽  
Guichang Zhang ◽  
Zhenyu Hong
Keyword(s):  
Density Distribution ◽  
Pressure Distribution ◽  
Piston Ring ◽  
Lubricating Oil ◽  
Asperity Contact ◽  
Two Dimensional ◽  
Cavitation Model ◽  
Film Rupture ◽  
Content Type ◽  
Piston Ring Lubrication

Purpose Piston ring dynamic problem plays an important role in the lubricant characteristics of a reciprocating engine, which lead to engine wear and the increased consumption of lubricating oil. A cavitation analysis of the piston ring lubrication with two-dimensional Reynolds equation has rarely been reported owing to the complex working condition. The purpose of this study is to establish a precise model that can provide guidance for the design of the piston ring. Design/methodology/approach In this paper, a cavitation model and its effect on the piston ring lubrication was studied in a simulation program based on the mass-conserving theory which is solved by means of the Newton–Raphson method. In this study, some models such as mixed lubrication, asperity contact, blow-by/blow-back flow and cavitation have been coupled with the lubrication model. Findings The established model has been compared with the traditional model that deals with cavitation by using the Reynolds boundary condition algorithm. The cavitation zone, pressure distribution and density distribution between the piston ring and the cylinder have also been predicted. Studies of the changing trend for the pressure distribution and the cavitation zone at few typical crank angles have been listed to illustrate the cavitation changing rule. The analysis of the results indicates that the developed simulation model can adequately illustrate the lubrication problem of the piston ring system. All the analyses will provide guidance for the oil film rupture and the reformation process. Originality/value A two-dimensional cavitation model based on the mass-conserving theory has been built. The cavitation-forming and -developing process for the piston ring–liner lubrication has been studied. Non-cavitation occurs in the vicinity of top dead center and bottom dead center. The non-cavitation period will be longer in the vicinity of 360° of crank angle. The density distribution in the cavitation zone can be obtained.

A Hydrodynamical Theory of Piston Ring Lubrication

Physics ◽  
1936 ◽  
Vol 7 (9) ◽  
pp. 364-367 ◽  
Author(s):  
R. A. Castleman
Keyword(s):  
Piston Ring ◽  
Piston Ring Lubrication ◽  
Hydrodynamical Theory

Analysis of Tribological Performance of Piston Ring Lubrication

2011 ◽  
Author(s):  
Yibin Guo ◽  
Wanyou Li ◽  
Dequan Zou ◽  
Xiqun Lu ◽  
Tao He
Keyword(s):  
Film Thickness ◽  
Friction Force ◽  
Power Loss ◽  
Piston Ring ◽  
Design Parameters ◽  
Oil Film ◽  
Starved Lubrication ◽  
Piston Ring Lubrication ◽  
Cylinder Bore ◽  
Lubrication Conditions

In this paper a mixed lubrication model considering lubricant supply conditions on cylinder bore has been developed for the piston ring lubrication. The numerical procedures of both fully flooded and starved lubrication were included in the model. The lubrication equations and boundary conditions at the end of strokes were discussed in detail. The effects of piston ring design parameters, such as ring face profile and ring tension, on oil film thickness, friction force and power loss under fully flooded and starved lubrication conditions due to available lubricant supply on cylinder bore were studied. The simulation results show that the oil available in the inlet region of the oil film is important to the piston ring friction power loss. With different ring face crown heights and tensions, the changes of oil film thickness and friction force were apparent under fully flooded lubrication, but almost no changes were found under starved lubrication except at the end of a stroke. In addition, the oil film thickness and friction force were affected evidently by the ring face profile offsets under both fully flooded and starved lubrication conditions, and the offset towards the combustion chamber made a large contribution to forming thicker oil film during the expansion stroke. So under different lubricant supply conditions on the cylinder bore, the ring profile and tension need to be adjusted to reduce the friction and power loss. Moreover, the effects of lubricant viscosity, surface composite roughness, and engine operating speed on friction force and power loss were also discussed.

Sign in / Sign up

Export Citation Format

Share Document