Novel Approaches and Application of Contemporary Sensory Evaluation Practices in Iron Fortification Programs

2003 ◽  
Vol 43 (4) ◽  
pp. 379-400 ◽  
Author(s):  
Adelia C. Bovell-Benjamin ◽  
Jean-Xavier Guinard
2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
V. Dueik ◽  
B. K. Chen ◽  
L. L. Diosady

Tea seems to be like a logical substrate for iron fortification; however, its fortification with iron presents technical challenges as tea polyphenols form a blue complex with iron that makes both of them unavailable for absorption. The objective of this work was to develop an effective technology, to prevent the interaction of iron and polyphenols by using EDTA as a competing complexing agent. Fortified tea was prepared from premix, prepared by spraying iron and sodium EDTA into tea leaves. Iron concentration in tea was adjusted to 5 mg/cup. Iron content was measured by AAS and the iron-polyphenol complex by spectrophotometry at 560 nm. Sensory evaluation was carried out in order to determine if fortification affects the properties of tea. A molar ratio of 1 : 2 Fe : EDTA was able to avoid complex formation and provide 4 mg of iron per cup of brewed tea. The fortified tea had a similar colour and flavour as ordinary tea, without the development of off-flavours. However, fortified tea with a ratio lower than 1 : 2 had a darker colour and off-flavours. By the addition of EDTA in a molar ratio ≥1 : 2, it is possible to produce an iron fortified tea without the formation of off-flavours.


EDIS ◽  
2021 ◽  
Vol 2021 (3) ◽  
Author(s):  
Sean Michael Campbell ◽  
Charles A. Sims

This new 5-page publication of the UF/IFAS Environmental Horticulture Department is the third in a series designed to assist producers in the small-to-medium-sized sensory evaluation of their horticultural crops, summarizing the standard sensory evaluation practices established for testing environment, sample ballots, panelist recruitment, and sample preparation. Written by Sean M. Campbell and Charles A. Sims.


Author(s):  
Arthur V. Jones

In comparison with the developers of other forms of instrumentation, scanning electron microscope manufacturers are among the most conservative of people. New concepts usually must wait many years before being exploited commercially. The field emission gun, developed by Albert Crewe and his coworkers in 1968 is only now becoming widely available in commercial instruments, while the innovative lens designs of Mulvey are still waiting to be commercially exploited. The associated electronics is still in general based on operating procedures which have changed little since the original microscopes of Oatley and his co-workers.The current interest in low-voltage scanning electron microscopy will, if sub-nanometer resolution is to be obtained in a useable instrument, lead to fundamental changes in the design of the electron optics. Perhaps this is an opportune time to consider other fundamental changes in scanning electron microscopy instrumentation.


Sign in / Sign up

Export Citation Format

Share Document