Effect of longitudinal−torsional vibration in ultrasonic-assisted drilling

2016 ◽  
Vol 32 (6) ◽  
pp. 616-622 ◽  
Author(s):  
Saeid Amini ◽  
Meysam Soleimani ◽  
Hossein Paktinat ◽  
Mohammad Lotfi
Author(s):  
Chenjun Wu ◽  
Shijin Chen ◽  
Kai Cheng ◽  
Hui Ding ◽  
Caiwei Xiao

This paper presents an innovative design and development of a longitudinal-torsional ultrasonic vibration transducer. This longitudinal-torsional ultrasonic vibration transducer can be stimulated up by one group of longitudinal piezoelectric ceramics and it has a shared longitudinal and torsional vibration node plane. The longitudinal-torsional ultrasonic vibration transducer consists of two amplitude horns, a mounting flange, and four pieces of axially poled piezoelectric ceramics. Theoretical analysis and formulation of the share vibration node have been studied, which are used to guide the design of the transducer. Five helical grooves are cut off along the circumference of the amplitude horn so as to convert the longitudinal vibration to both longitudinal and torsional vibration at the same time. Simulations have confirmed that each longitudinal-torsional vibration mode has one shared node on the transducer. The vibration amplitude is measured by a laser displacement sensor and the largest longitudinal displacement of longitudinal-torsional ultrasonic vibration transducer reaches 6 µm and torsional displacement reaches 11 mrad when 500Vpp voltage is applied on the transducer. Ultrasonic vibration milling experiments have shown that the longitudinal-torsional ultrasonic vibration transducer has played a great role in the cutting process as the longitudinal-torsional ultrasonic vibration milling decreases the cutting force substantially compared to the convention milling operations.


2016 ◽  
Author(s):  
Latha Sethuraman ◽  
Jonathan Keller ◽  
Robb Wallen
Keyword(s):  

2014 ◽  
Vol 11 (5) ◽  
pp. 361-367 ◽  
Author(s):  
Mahgol Tajbakhsh ◽  
Yousef Ranjbar ◽  
Abdolhosein Masuodi ◽  
Parizad Rezaee ◽  
Mahmood Tajbakhsh ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Azam Marjani ◽  
Reza Khan Mohammadi

AbstractHg(II) has been identified to be one of the extremely toxic heavy metals because of its hazardous effects and this fact that it is even more hazardous to animals than other pollutants such as Ag, Au, Cd, Ni, Pb, Co, Cu, and Zn. Accordingly, for the first time, tetrasulfide-functionalized fibrous silica KCC-1 (TS-KCC-1) spheres were synthesized by a facile, conventional ultrasonic-assisted, sol–gel-hydrothermal preparation approach to adsorb Hg(II) from aqueous solution. Tetrasulfide groups (–S–S–S–S–) were chosen as binding sites due to the strong and effective interaction of mercury ions (Hg(II)) with sulfur atoms. Hg(II) uptake onto TS-KCC-1 in a batch system has been carried out. Isotherm and kinetic results showed a very agreed agreement with Langmuir and pseudo-first-order models, respectively, with a Langmuir maximum uptake capacity of 132.55 mg g–1 (volume of the solution = 20.0 mL; adsorbent dose = 5.0 mg; pH = 5.0; temperature: 198 K; contact time = 40 min; shaking speed = 180 rpm). TS-KCC-1was shown to be a promising functional nanoporous material for the uptake of Hg(II) cations from aqueous media. To the best of our knowledge, there has been no report on the uptake of toxic Hg(II) cations by tetrasulfide-functionalized KCC-1 prepared by a conventional ultrasonic-assisted sol–gel-hydrothermal synthesis method.


Sign in / Sign up

Export Citation Format

Share Document