scholarly journals Seismic performance of subassemblies with composite wall and replaceable steel coupling beam

2020 ◽  
Vol 19 (2) ◽  
pp. 123-137
Author(s):  
Yang Liu ◽  
Hai Chen ◽  
Zi-Xiong Guo ◽  
Hong-Song Hu
Keyword(s):  
Seismic Performance ◽  
Coupling Beam ◽  
Composite Wall ◽  
Steel Coupling Beam

Study on Seismic Performance of Connection of Hybrid Coupled Wall System

2012 ◽  
Vol 256-259 ◽  
pp. 737-741
Author(s):  
An Liang Song ◽  
Ming Zhou Su ◽  
Xu Dong Li ◽  
Yun Shi ◽  
Zhen Shan Wang
Keyword(s):  
Seismic Performance ◽  
Design Method ◽  
Coupling Beam ◽  
Coupling Beams ◽  
Coupled Wall ◽  
Coupled Walls ◽  
Seismic Design Method ◽  
Steel Coupling Beam ◽  
Wall System ◽  
Better Than

Based on the state-of-the-art of the research on connection of steel coupling beam to shear wall, The steel coupling beam has satisfactory seismic performance which is better than reinforced concrete coupling beams and composite coupling beams. In this paper, the existing research results were summarized and some views were put forward. It was useful to develop a seismic design method for hybrid coupled walls in China.

Stud Bolt Effects on the Bearing Performance of Pseudo Strain-Hardening Cementitious Composite (PSH2C) Wall-Steel Coupling Beam Connections

2012 ◽  
Vol 253-255 ◽  
pp. 587-590
Author(s):  
Sun Woong Kim ◽  
Wan Shin Park ◽  
Nam Young Eom ◽  
Hyun Do Yun
Keyword(s):  
Seismic Performance ◽  
Shear Walls ◽  
Coupling Beam ◽  
Cementitious Composite ◽  
Concrete Wall ◽  
Normal Concrete ◽  
High Rise ◽  
Pseudo Strain Hardening ◽  
Steel Coupling Beam ◽  
Shear System

Recently, hybrid coupled shear system, where steel coupling beam couple two or more RC shear walls are frequently applied for medium and high-rise building subjected to earthquake. This paper addresses the seismic performance of PSH2C wall - steel coupling beam with stud bolts in the connection region. Test variables included stud bolts in embedded steel coupling beam and types of material, such as PSH2C and concrete, in the wall. The results show that PSH2C wall – beam connections (PSH2C-ST and PSH2C-SB) exhibit better hysteretic response than normal concrete wall – beam connections (HCWS-ST and HCWS-SB).

Based on the Grey Relation Analysis of Ecological Composite Wall Seismic Performance Research

2013 ◽  
Vol 368-370 ◽  
pp. 1043-1047
Author(s):  
Yin Zhang ◽  
You Han ◽  
Shuai Liang
Keyword(s):  
Seismic Performance ◽  
Evaluation System ◽  
Design Method ◽  
Structure Design ◽  
Grey System Theory ◽  
Frame Structure ◽  
Wall Structure ◽  
Width Ratio ◽  
Grey System ◽  
Composite Wall

Ecological composite wall as ecological composite wall structure of the main stress components, the seismic performance is ecological composite wall structure seismic performance evaluation system of the main content. Based on the grey system theory, the grey correlation analysis to the key parameters (the mouth of the cave, frame structure, height to width ratio) change ecological composite wall test results are analyzed, the key parameters on the ecological composite wall the influence law of seismic performance, for choosing wall structure design method to provide basis.

scholarly journals Experimental Comparison Study on Cyclic Behavior of Coupled Shear Walls with Two-Level-Yielding Steel Coupling Beam and RC Coupling Beam

2018 ◽  
Author(s):  
Guoqiang LI ◽  
Mengde PANG ◽  
Feifei Sun ◽  
Liulian LI ◽  
Jianyun SUN
Keyword(s):  
Energy Dissipation ◽  
Lateral Displacement ◽  
Shear Walls ◽  
Shear Wall ◽  
Cyclic Behavior ◽  
Experimental Comparison ◽  
Coupling Beam ◽  
Coupling Beams ◽  
Coupled Shear Wall ◽  
Steel Coupling Beam

Coupled shear walls are widely used in high rise buildings, since they can not only provide efficient lateral stiffness but also behave outstanding energy dissipation ability especially for earthquake-resistance. Traditionally, the coupling beams are made of reinforced concrete, which are prone to shear failure due to low aspect ratio and greatly reduce the efficiency and ability of energy dissipation.  For overcoming the shortcoming of concrete reinforced coupling beams (RCB), an innovative steel coupling beams called two-level-yielding steel coupling beam (TYSCB) is invented to balance the demand of stiffness and energy dissipation for coupled shear walls. TYSCBs are made of two parallel steel beams with yielding at two different levels.  To verify and investigate the aseismic behaviour improvement of TYSCB-coupled shear walls, two 1/3 scale, 10-storey coupled shear wall specimens with TYSCB and RCB were tested under both gravity and lateral displacement reversals. These two specimens were designed with the same bearing capacity, thus to be easier to compare. The experimental TYSCB specimen demonstrated more robust cyclic performance. Both specimens reached 1% lateral drift, however, the TYSCB-coupled shear wall showed minimal strength degradation. Additionally, a larger amount of energy was dissipated during each test of the TYSCB specimen, compared with the RCB specimen. Based on the experimental results, design recommendations are provided.

scholarly journals The Steel Coupling Beam-Wall Connections Strength

2006 ◽  
Vol 18 (1) ◽  
pp. 135-145
Author(s):  
Wan-Shin Park ◽  
Hyun-Do Yun
Keyword(s):  
Coupling Beam ◽  
Steel Coupling Beam

scholarly journals Experimental study on seismic performance of a low-energy consumption composite wall structure of a pre-fabricated lightweight steel frame

2019 ◽  
Vol 6 (4) ◽  
pp. 181965 ◽  
Author(s):  
Jia Suizi ◽  
Cao Wanlin ◽  
Liu Zibin
Keyword(s):  
Energy Consumption ◽  
Energy Dissipation ◽  
Seismic Performance ◽  
Low Energy ◽  
Wall Structure ◽  
Low Energy Consumption ◽  
Steel Column ◽  
Wall Specimen ◽  
Composite Wall ◽  
Energy Dissipation Capacity

This study developed a low-energy consumption composite wall structure constructed with a pre-fabricated lightweight steel frame that is suitable for houses in villages and towns and evaluated its anti-seismic performance. A low-reversed cyclic-loading test was conducted on four full-scale pre-fabricated structure specimens, including a lightweight, concrete-filled steel tube (CFST) column frame specimen (abbreviated as SFCF), a lightweight CFST column frame composite wall specimen (abbreviated as SFCFW), an H-steel column frame specimen (abbreviated as HSCF) and an H-steel column frame composite wall specimen (abbreviated as HSCFW). The failure characteristics, hysteretic behaviour, strength, rigidity, ductility and energy dissipation capacity of each specimen were compared and analysed. The results demonstrated that the pre-fabricated, double L-shaped beam–column joint with a stiffener rib which was proposed in this study worked reliably and exhibited good anti-seismic performance. The yield, ultimate and frame yield loads of the specimen SFCFW were 1.72, 1.80 and 2.03 times higher than those of specimen SFCF. The yield load, ultimate load and frame yield loads of specimen HSCFW were 1.27, 1.68 and 1.82 times higher than those of specimen HSCF. This indicates that the embedded composite wall contributed significantly to the horizontal bearing capacities of the SFCF and HSCF specimens. The embedded composite wall was divided into multiple strip-shaped composite panels during failure and achieved a stable support for the frame in the later stages of elastoplastic deformation. The horizontal strips of the tongue-and-groove connection between the strip-shaped composite panels produced reciprocating bite displacements, and ultimately improved the structure's energy dissipation capacity significantly.

Sign in / Sign up

Export Citation Format

Share Document