Relationship between Fiber Fineness and Diameter of Three Bast Fibers

2021 ◽  
pp. 1-8
Author(s):  
Qian Geng ◽  
Chengfeng Zhou ◽  
Kai Nie ◽  
Wanwan Lv ◽  
Haoxi Ben ◽  
...  
Keyword(s):  
Bast Fibers ◽  
Fiber Fineness

A Computer Simulation Approach for Engineering Air-Jet Spun Yarns

1997 ◽  
Vol 67 (3) ◽  
pp. 223-230 ◽  
Author(s):  
Rangaswamy Rajamanickam ◽  
Steven M. Hansen ◽  
Sundaresan Jayaraman
Keyword(s):  
Computer Simulation ◽  
Computer Simulations ◽  
Fiber Length ◽  
Experimental Investigations ◽  
Simulation Approach ◽  
Air Jet ◽  
Fiber Fineness ◽  
Spun Yarns ◽  
Yarn Count ◽  
Wrap Angle

A computer simulation approach for engineering air-jet spun yarns is proposed, and the advantages of computer simulations over experimental investigations and stand-alone mathematical models are discussed. Interactions of the following factors in air-jet spun yarns are analyzed using computer simulations: yarn count and fiber fineness, fiber tenacity and fiber friction, fiber length and fiber friction, and number of wrapper fibers and wrap angle. Based on the results of these simulations, yarn engineering approaches to optimize strength are suggested.

scholarly journals Valorization of Byproducts of Hemp Multipurpose Crop: Short Non-Aligned Bast Fibers as a Source of Nanocellulose

Molecules ◽  
2021 ◽  
Vol 26 (16) ◽  
pp. 4723
Author(s):  
Sara Dalle Vacche ◽  
Vijayaletchumy Karunakaran ◽  
Alessia Patrucco ◽  
Marina Zoccola ◽  
Loreleï Douard ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Thermogravimetric Analysis ◽  
Cannabis Sativa ◽  
Crystallinity Index ◽  
Residual Lignin ◽  
Chemical Pretreatment ◽  
X Ray Diffraction ◽  
X Ray ◽  
Bast Fibers ◽  
Seed Maturity

Nanocellulose was extracted from short bast fibers, from hemp (Cannabis sativa L.) plants harvested at seed maturity, non-retted, and mechanically decorticated in a defibering apparatus, giving non-aligned fibers. A chemical pretreatment with NaOH and HCl allowed the removal of most of the non-cellulosic components of the fibers. No bleaching was performed. The chemically pretreated fibers were then refined in a beater and treated with a cellulase enzyme, followed by mechanical defibrillation in an ultrafine friction grinder. The fibers were characterized by microscopy, infrared spectroscopy, thermogravimetric analysis and X-ray diffraction after each step of the process to understand the evolution of their morphology and composition. The obtained nanocellulose suspension was composed of short nanofibrils with widths of 5–12 nm, stacks of nanofibrils with widths of 20–200 nm, and some larger fibers. The crystallinity index was found to increase from 74% for the raw fibers to 80% for the nanocellulose. The nanocellulose retained a yellowish color, indicating the presence of some residual lignin. The properties of the nanopaper prepared with the hemp nanocellulose were similar to those of nanopapers prepared with wood pulp-derived rod-like nanofibrils.

scholarly journals Improvement of Performance Profile of Acrylic Based Polyester Bio-Composites by Bast/Basalt Fibers Hybridization for Automotive Applications

2021 ◽  
Vol 5 (4) ◽  
pp. 100
Author(s):  
Anjum Saleem ◽  
Luisa Medina ◽  
Mikael Skrifvars
Keyword(s):  
Hybrid Composites ◽  
Flexural Modulus ◽  
Basalt Fiber ◽  
Fiber Composites ◽  
Fiber Reinforced ◽  
Basalt Fibers ◽  
Bast Fiber ◽  
Bast Fibers ◽  
Resin Impregnation ◽  
Structural Applications

New technologies in the automotive industry require lightweight, environment-friendly, and mechanically strong materials. Bast fibers such as kenaf, flax, and hemp reinforced polymers are frequently used composites in semi-structural applications in industry. However, the low mechanical properties of bast fibers limit the applications of these composites in structural applications. The work presented here aims to enhance the mechanical property profile of bast fiber reinforced acrylic-based polyester resin composites by hybridization with basalt fibers. The hybridization was studied in three resin forms, solution, dispersion, and a mixture of solution and dispersion resin forms. The composites were prepared by established processing methods such as carding, resin impregnation, and compression molding. The composites were characterized for their mechanical (tensile, flexural, and Charpy impact strength), thermal, and morphological properties. The mechanical performance of hybrid bast/basalt fiber composites was significantly improved compared to their respective bast fiber composites. For hybrid composites, the specific flexural modulus and strength were on an average about 21 and 19% higher, specific tensile modulus and strength about 31 and 16% higher, respectively, and the specific impact energy was 13% higher than bast fiber reinforced composites. The statistical significance of the results was analyzed using one-way analysis of variance.

Measurement with the CSIRO Fiber Fineness Distribution Analyser

1982 ◽  
Vol 52 (3) ◽  
pp. 217-227 ◽  
Author(s):  
H.W.M. Lunney ◽  
P.A. Irvine
Keyword(s):  
Fiber Fineness

Discriminant analysis-based modeling of cotton fiber and yarn properties

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Baneswar Sarker ◽  
Shankar Chakraborty
Keyword(s):  
Discriminant Analysis ◽  
Physical Properties ◽  
Cotton Fiber ◽  
Fiber Strength ◽  
Natural Fibers ◽  
Content Type ◽  
Fiber Properties ◽  
Yarn Properties ◽  
Fiber Fineness ◽  
Genetic And Environmental Factors

Purpose Like all other natural fibers, the physical properties of cotton also vary owing to changes in the related genetic and environmental factors, which ultimately affect both the mechanics involved in yarn spinning and the quality of the yarn produced. However, information is lacking about the degree of influence that those properties impart on the spinnability of cotton fiber and the strength of the final yarn. This paper aims to discuss this issue. Design/methodology/approach This paper proposes the application of discriminant analysis as a multivariate regression tool to develop the causal relationships between six cotton fiber properties, i.e. fiber strength (FS), fiber fineness (FF), upper half mean length (UHML), uniformity index (UI), reflectance degree and yellowness and spinning consistency index (SCI) and yarn strength (YS) along with the determination of the respective contributive roles of those fiber properties on the considered dependent variables. Findings Based on the developed discriminant function, it can be revealed that FS, UI, FF and reflectance degree are responsible for higher YS. On the other hand, with increasing values of UHML and fiber yellowness, YS would tend to decrease. Similarly, SCI would increase with higher values of FS, UHML, UI and reflectance degree, and its value would decrease with increasing FF and yellowness. Originality/value The discriminant functions can effectively envisage the contributive role of each of the considered cotton fiber properties on SCI and YS. The discriminant analysis can also be adopted as an efficient tool for investigating the effects of various physical properties of other natural fibers on the corresponding yarn characteristics.

Transplanting improves the allometry and fiber quality of Bt cotton in cotton–wheat cropping system

2019 ◽  
Vol 56 (1) ◽  
pp. 26-36
Author(s):  
Muhammad Asghar Shah ◽  
Mubshar Hussain ◽  
Muhammad Shahzad ◽  
Khawar Jabran ◽  
Sami Ul-Allah ◽  
...  
Keyword(s):  
Fiber Length ◽  
Fiber Strength ◽  
Management Practice ◽  
Cropping Systems ◽  
Fiber Quality ◽  
Cropping System ◽  
Bt Cotton ◽  
Area Index ◽  
Fiber Fineness

AbstractIn cotton–wheat cropping system of Pakistan, wheat (Triticum aestivum L.) is harvested in late April; however, the optimum sowing time of Bt cotton is mid-March. This indicates a time difference of 4–6 weeks between the harvest of wheat and cotton sowing. It is hypothesized that this overlapping period may be managed by transplanting cotton seedlings (30–45 days old) in late April, after the harvest of wheat due to better performance of already established seedlings. To this end, this study was conducted to evaluate the allometric traits and fiber quality of transplanted Bt cotton after harvesting wheat in the cotton–wheat cropping system. The Bt cotton–wheat cropping systems were flat sown wheat (FSW)–conventionally tilled cotton, FSW–zero tilled cotton, ridge sown wheat–ridge transplanted cotton using 30- and 45-days-old seedlings, and bed sown wheat (BSW)–bed transplanted cotton (BTC) also using 30- and 45-days-old seedlings. The study was conducted at Vehari and Multan in Punjab, Pakistan. Bt cotton in BSW–BTC with 45-days-old seedlings showed better performance for allometric (leaf area index; (LAI), net assimilation rate; (NAR), and crop growth rate; (CGR)), seed cotton yield, and fiber traits (fiber uniformity, fiber length, fiber strength, and fiber fineness) in comparison to other treatments. Most of the fiber quality traits were positively correlated with allometric traits and biological yield (dry matter yield at maturity) at both locations, except correlations of CGR and LAI with fiber fineness and fiber length and NAR with fiber length. As plant growth and fiber quality of transplanted cotton was significantly higher than conventionally grown cotton, our data indicate transplanting is an interesting management practice for improving productivity in wheat–cotton cropping systems.

scholarly journals Genetics of Inheritance and Interrelationship of Various Agronomic Traits of F2 Population in Cotton (Gossypium hirsutum L.)

2019 ◽  
pp. 1-15
Author(s):  
Bilal Nawaz ◽  
Saira Sattar ◽  
Bilal Bashir ◽  
Muhammad Jamshaid ◽  
Khadim Hussain ◽  
...  
Keyword(s):  
Agronomic Traits ◽  
Fiber Strength ◽  
Cotton Yield ◽  
Seed Cotton ◽  
Gossypium Hirsutum L ◽  
Seed Cotton Yield ◽  
F2 Population ◽  
Fiber Fineness ◽  
Boll Weight ◽  
Beak Size

Background: Cotton (Gossypium hirsutum L.) is grown in more than sixty countries worldwide. It is an important fiber crop in the world. It plays a vital role in our national economy being the source of earning of foreign exchange, therefore, it is considered to be the backbone of the economy of Pakistan. In Pakistan, millions of families are associated with cotton and textile industry for their livelihood.  Results: In this experiment F2 population of the cross L. A. Frego Bract x CIM-600 and their parents was sown in randomized complete block design with three replications during normal growing season of the year 2014 to sort out best performing genotypes for yield related traits. Analysis of variance (ANOVA) revealed that parental and their F2 population showed significant differences for all the observed agronomic traits (plant height, number of monopodia branches, number of sympodial branches, number of bolls per plant, boll weight, ginning out turn, bract type, boll shape, beak size, seed cotton yield, staple length, fiber strength and fiber fineness). Estimation of correlation revealed that seed cotton yield was found positively correlated sympodial branches, fiber fineness and boll weight while ginning out turn, bract type, beak size, staple length and fiber strength were negatively associated with seed cotton yield. Epistasis was not found to be involved in any of the traits. Conclusion:  The correlation and genetics study of various yield related traits provides us useful information for effective selection and sustainable breeding programs. Estimation of broad sense heritability ( ) in F2 populations for different traits vary as following order; ginning out turn>plant height>seed cotton yield>sympodia branches>fiber length>fiber strength>bolls per plant>monopodia branches>boll weight>fiber fineness with heritability 0.90, 0.79, 0.78, 0.75, 0.73, 0.71 0.67, 0.64, 0.63 and 0.50 respectively. Results suggested form heritability and correlation that these traits can be improved either through appropriate selection method or hybrid breeding programme.

scholarly journals Estimation of Genetic Effects Controlling Different Plant Traits in Cotton (Gossypium Hirsutum L.) Under Clcuv Epidemic Condition

2017 ◽  
Vol 50 (1) ◽  
pp. 47-56 ◽  
Author(s):  
A.M. Khan ◽  
S. Fiaz ◽  
I. Bashir ◽  
S. Ali ◽  
M. Afzal ◽  
...  
Keyword(s):  
Plant Traits ◽  
Fiber Strength ◽  
Block Design ◽  
Cotton Leaf ◽  
Cotton Leaf Curl Virus ◽  
Fiber Fineness ◽  
Cotton Genotypes ◽  
Seed Index ◽  
Leaf Curl Virus ◽  
Additive Genes

Abstract Nine cotton genotypes, comprised of four non Bt males (CIM-1100, CIM-506, FH-942 and FH-900), five Bt female genotypes (FH-113, FH-114, MNH- 886, AA-703 and IR-3701) and their 20 crosses were screened in order to evaluate their response to Cotton leaf curl virus symptoms through epidemiology in the field and greenhouse. The 20 crosses among their nine parents were sown in two replications under randomized complete block design, during 2013 and 2014. The mean squares were significant for all traits indicating that both additive and non-additive genes control the characters, but non-additive genes were more important because, variance of dominant genes were higher than additive genes. In our test, FH-900 showed the best performance against CLCuV, number of lobes per boll and seed yield. The CIM- 1100 genotype performed well in boll weight, fiber strength and fiber fineness, whereas CIM-506 was good for plant height, number of sympodial branches and ginning. Maximum boll number, seed index and fiber length were shown by FH-942. Among lines, MNH886, FH-113, IR-3701 and FH-114 exhibited the best general combination for many traits. Hence, parents were preferred for hybridization program to improve the majority of characters. Hybrids FH-113 × FH-942, MNH-886 × CIM-1100, MNH-886 × FH-942, IR-3701 × CIM-506, AA-703 × CIM-1100, FH-114 × FH-942, FH-114 × CIM-1100 and MNH-886 × FH- 900 was best in specific combinations for different traits, especially against CLCuV. The results indicated that to increase resistance against CLCuV, hybrids should be exploited to develop CLCuV resistance.

Sign in / Sign up

Export Citation Format

Share Document