scholarly journals The function of chitin synthases 2 and 3 in the Saccharomyces cerevisiae cell cycle.

1991 ◽  
Vol 114 (1) ◽  
pp. 111-123 ◽  
Author(s):  
J A Shaw ◽  
P C Mol ◽  
B Bowers ◽  
S J Silverman ◽  
M H Valdivieso ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Wall ◽  
Light And Electron Microscopy ◽  
Yeast Cells ◽  
Chitin Synthesis ◽  
Triple Mutant ◽  
Chitin Synthases ◽  
Bud Emergence ◽  
Primary Septum ◽  
Mother Cells

The morphology of three Saccharomyces cerevisiae strains, all lacking chitin synthase 1 (Chs1) and two of them deficient in either Chs3 (calR1 mutation) or Chs2 was observed by light and electron microscopy. Cells deficient in Chs2 showed clumpy growth and aberrant shape and size. Their septa were very thick; the primary septum was absent. Staining with WGA-gold complexes revealed a diffuse distribution of chitin in the septum, whereas chitin was normally located at the neck between mother cell and bud and in the wall of mother cells. Strains deficient in Chs3 exhibited minor abnormalities in budding pattern and shape. Their septa were thin and trilaminar. Staining for chitin revealed a thin line of the polysaccharide along the primary septum; no chitin was present elsewhere in the wall. Therefore, Chs2 is specific for primary septum formation, whereas Chs3 is responsible for chitin in the ring at bud emergence and in the cell wall. Chs3 is also required for chitin synthesized in the presence of alpha-pheromone or deposited in the cell wall of cdc mutants at nonpermissive temperature, and for chitosan in spore walls. Genetic evidence indicated that a mutant lacking all three chitin synthases was inviable; this was confirmed by constructing a triple mutant rescued by a plasmid carrying a CHS2 gene under control of a GAL1 promoter. Transfer of the mutant from galactose to glucose resulted in cell division arrest followed by cell death. We conclude that some chitin synthesis is essential for viability of yeast cells.

scholarly journals A Chitin Synthase and Its Regulator Protein Are Critical for Chitosan Production and Growth of the Fungal Pathogen Cryptococcus neoformans

2005 ◽  
Vol 4 (11) ◽  
pp. 1902-1912 ◽  
Author(s):  
Isaac R. Banks ◽  
Charles A. Specht ◽  
Maureen J. Donlin ◽  
Kimberly J. Gerik ◽  
Stuart M. Levitz ◽  
...  
Keyword(s):  
Cell Wall ◽  
Cryptococcus Neoformans ◽  
Fungal Pathogen ◽  
Liquid Culture ◽  
Chitin Synthase ◽  
Yeast Cells ◽  
Chitin Synthesis ◽  
Chitin Synthases ◽  
Regulator Protein ◽  
Chitin And Chitosan

ABSTRACT Chitin is an essential component of the cell wall of many fungi. Chitin also can be enzymatically deacetylated to chitosan, a more flexible and soluble polymer. Cryptococcus neoformans is a fungal pathogen that causes cryptococcal meningoencephalitis, particularly in immunocompromised patients. In this work, we show that both chitin and chitosan are present in the cell wall of vegetatively growing C. neoformans yeast cells and that the levels of both rise dramatically as cells grow to higher density in liquid culture. C. neoformans has eight putative chitin synthases, and strains with any one chitin synthase deleted are viable at 30°C. In addition, C. neoformans genes encode three putative regulator proteins, which are homologs of Saccharomyces cerevisiae Skt5p. None of these three is essential for viability. However, one of the chitin synthases (Chs3) and one of the regulators (Csr2) are important for growth. Cells with deletions in either CHS3 or CSR2 have several shared phenotypes, including sensitivity to growth at 37°C. The similarity of their phenotypes also suggests that Csr2 specifically regulates chitin synthesis by Chs3. Lastly, both chs3Δ and the csr2Δ mutants are defective in chitosan production, predicting that Chs3-Csr2 complex with chitin deacetylases for conversion of chitin to chitosan. These data suggest that chitin synthesis could be an excellent antifungal target.

Ultrastructure of Candida Albicans And Saccharomyces Cerevisiae After Treatment With Sch 56301 (An Aureobasidin)

1999 ◽  
Vol 5 (S2) ◽  
pp. 1276-1277
Author(s):  
B.J. Dovey-Hartman ◽  
C. Cramer ◽  
J. Greene ◽  
K.J. Shaw ◽  
R.S. Hare ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Cell Wall ◽  
Candida Albicans ◽  
Yeast Cells ◽  
Cyclic Depsipeptide ◽  
Spindle Elongation ◽  
Mother Cells ◽  
Cell Changes ◽  
Normal Cell Cycle

Aureobasidins are cyclic depsipeptide natural products that have been shown to be fungicidal against a wide variety of fungi. We have studied the effect of an aureobasidin-like compound, SCH 56301 on the morphology and cytology of yeast cells. For both, Candida albicans and Saccharomyces cerevisiae, the normal cell cycle is disrupted by sub-lethal concentrations of the compound. In Saccharomyces, cells accumulate at the G2/M border of the cell cycle, DNA replication is essentially complete and a short nuclear spindle is visible; however, nuclear migration and spindle elongation do not occur and consequently a small round daughter cell remains attached to the mother cell. Changes in cell wall morphology are visible at old bud scars remaining on mother cells. Under the conditions of preparation of the specimens, there may have been insufficient cross-linking during treatment with SCH 56301 so that intracellular pressure appears to be pushing on a weakened cell wall at these points.

scholarly journals Purification of profilin from Saccharomyces cerevisiae and analysis of profilin-deficient cells.

1990 ◽  
Vol 110 (1) ◽  
pp. 105-114 ◽  
Author(s):  
B K Haarer ◽  
S H Lillie ◽  
A E Adams ◽  
V Magdolen ◽  
W Bandlow ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Wall ◽  
Actin Polymerization ◽  
Yeast Cells ◽  
Predicted Amino Acid Sequence ◽  
Temperature Sensitive ◽  
Wild Type ◽  
Yeast Saccharomyces Cerevisiae ◽  
Ellipsoidal Shape ◽  
Hydrolysis Of

We have isolated profilin from yeast (Saccharomyces cerevisiae) and have microsequenced a portion of the protein to confirm its identity; the region microsequenced agrees with the predicted amino acid sequence from a profilin gene recently isolated from S. cerevisiae (Magdolen, V., U. Oechsner, G. Müller, and W. Bandlow. 1988. Mol. Cell. Biol. 8:5108-5115). Yeast profilin resembles profilins from other organisms in molecular mass and in the ability to bind to polyproline, retard the rate of actin polymerization, and inhibit hydrolysis of ATP by monomeric actin. Using strains that carry disruptions or deletions of the profilin gene, we have found that, under appropriate conditions, cells can survive without detectable profilin. Such cells grow slowly, are temperature sensitive, lose the normal ellipsoidal shape of yeast cells, often become multinucleate, and generally grow much larger than wild-type cells. In addition, these cells exhibit delocalized deposition of cell wall chitin and have dramatically altered actin distributions.

scholarly journals Metabolism of 3-deoxy-3-fluoro-d-mannose and 4-deoxy-4-fluoro-d-mannose by Saccharomyces cerevisiae S288C

1983 ◽  
Vol 209 (3) ◽  
pp. 677-685 ◽  
Author(s):  
T J Grier ◽  
J R Rasmussen
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Wall ◽  
Particulate Fraction ◽  
Radioactive Material ◽  
Yeast Cells ◽  
Cell Wall Fraction ◽  
Cell Wall Polysaccharides ◽  
Sugar Nucleotide ◽  
Mannose 6 Phosphate

Incubation of Saccharomyces cerevisiae S288C with 4-deoxy-4-fluoro-D-[1-14C]-mannose resulted in the formation of three metabolites that were characterized as 4-deoxy-4-fluoro-D-[1-14C]mannose 1,6-bisphosphate, 4-deoxy-4-fluoro-D-[1-14C]-mannose 6-phosphate and GDP-4-deoxy-4-fluoro-D-[1-14C]mannose. In addition, radioactive material was incorporated into a particulate fraction composed primarily of cell-wall polysaccharides. Compared with the 4-fluoro sugar, 3-deoxy-3-fluoro-D-[1-14C]mannose was not transported into yeast cells as well, and its conversion into sugar nucleotide was much less efficient. Metabolites that were isolated after incubation with the 3-fluoro analogue were identified as 3-deoxy-3-fluoro-D-[1-14C]mannose 1,6-bisphosphate, 3-deoxy-3-fluoro-D-[1-14C]mannose 6-phosphate and GDP-3-deoxy-3-fluoro-D-[1-14C]mannose. Little radioactivity was transferred into the cell-wall fraction.

scholarly journals Saccharomyces cerevisiae Mid2p Is a Potential Cell Wall Stress Sensor and Upstream Activator of thePKC1-MPK1 Cell Integrity Pathway

1999 ◽  
Vol 181 (11) ◽  
pp. 3330-3340 ◽  
Author(s):  
Troy Ketela ◽  
Robin Green ◽  
Howard Bussey
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Wall ◽  
Wall Stress ◽  
Structural Features ◽  
Mitogen Activated Protein Kinase ◽  
Cell Integrity ◽  
Chitin Synthesis ◽  
Calcofluor White ◽  
Reading Frame ◽  
Cell Wall Stress

ABSTRACT The MID2 gene of Saccharomyces cerevisiaeencodes a protein with structural features indicative of a plasma membrane-associated cell wall sensor. MID2 was isolated as a multicopy activator of the Skn7p transcription factor. Deletion ofMID2 causes resistance to calcofluor white, diminished production of stress-induced cell wall chitin under a variety of conditions, and changes in growth rate and viability in a number of different cell wall biosynthesis mutants. Overexpression ofMID2 causes hyperaccumulation of chitin and increased sensitivity to calcofluor white. α-Factor hypersensitivity ofmid2Δ mutants can be suppressed by overexpression of upstream elements of the cell integrity pathway, includingPKC1, RHO1, WSC1, andWSC2. Mid2p and Wsc1p appear to have overlapping roles in maintaining cell integrity since mid2Δ wsc1Δ mutants are inviable on medium that does not contain osmotic support. A role for MID2 in the cell integrity pathway is further supported by the finding that MID2 is required for induction of Mpk1p tyrosine phosphorylation during exposure to α-factor, calcofluor white, or high temperature. Our data are consistent with a role for Mid2p in sensing cell wall stress and in activation of a response that includes both increased chitin synthesis and the Mpk1p mitogen-activated protein kinase cell integrity pathway. In addition, we have identified an open reading frame, MTL1, which encodes a protein with both structural and functional similarity to Mid2p.

scholarly journals Deletion of Atg22 gene contributes to reduce programmed cell death induced by acetic acid stress in Saccharomyces cerevisiae

2019 ◽  
Vol 12 (1) ◽  
Author(s):  
Jingjin Hu ◽  
Yachen Dong ◽  
Wei Wang ◽  
Wei Zhang ◽  
Hanghang Lou ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Amino Acids ◽  
Cell Death ◽  
Cell Wall ◽  
Acetic Acid ◽  
Programmed Cell Death ◽  
Cell Wall Integrity ◽  
Yeast Cells ◽  
Death Process ◽  
Lignocellulosic Biofuel

Abstract Background Programmed cell death (PCD) induced by acetic acid, the main by-product released during cellulosic hydrolysis, cast a cloud over lignocellulosic biofuel fermented by Saccharomyces cerevisiae and became a burning problem. Atg22p, an ignored integral membrane protein located in vacuole belongs to autophagy-related genes family; prior study recently reported that it is required for autophagic degradation and efflux of amino acids from vacuole to cytoplasm. It may alleviate the intracellular starvation of nutrition caused by Ac and increase cell tolerance. Therefore, we investigate the role of atg22 in cell death process induced by Ac in which attempt is made to discover new perspectives for better understanding of the mechanisms behind tolerance and more robust industrial strain construction. Results In this study, we compared cell growth, physiological changes in the absence and presence of Atg22p under Ac exposure conditions. It is observed that disruption and overexpression of Atg22p delays and enhances acetic acid-induced PCD, respectively. The deletion of Atg22p in S. cerevisiae maintains cell wall integrity, and protects cytomembrane integrity, fluidity and permeability upon Ac stress by changing cytomembrane phospholipids, sterols and fatty acids. More interestingly, atg22 deletion increases intracellular amino acids to aid yeast cells for tackling amino acid starvation and intracellular acidification. Further, atg22 deletion upregulates series of stress response genes expression such as heat shock protein family, cell wall integrity and autophagy. Conclusions The findings show that Atg22p possessed the new function related to cell resistance to Ac. This may help us have a deeper understanding of PCD induced by Ac and provide a new strategy to improve Ac resistance in designing industrial yeast strains for bioethanol production during lignocellulosic biofuel fermentation.

Killer Toxins of Yeasts: Inhibitors of Fermentation and Their Adsorption

1987 ◽  
Vol 50 (3) ◽  
pp. 234-238 ◽  
Author(s):  
FERDINAND RADLER ◽  
MANFRED SCHMITT
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Wall ◽  
Yeast Cell ◽  
Cell Walls ◽  
Killer Toxin ◽  
Yeast Cells ◽  
Toxin Concentration ◽  
Commercial Preparation ◽  
Killer Toxins ◽  
Original Amount

The killer toxin (KT 28), a glycoprotein of Saccharomyces cerevisiae strain 28, was almost completely adsorbed by bentonite, when applied at a concentration of 1 g per liter. No significant differences were found between several types of bentonite. Killer toxin KT 28 is similarly adsorbed by intact yeast cells or by a commercial preparation of yeast cell walls that has been recommended to prevent stuck fermentations. An investigation of the cell wall fractions revealed that the toxin KT 28 was mainly adsorbed by mannan, that removed the toxin completely. The alkali-soluble and the alkali-insoluble β-1,3- and β-1,6-D-glucans lowered the toxin concentration to one tenth of the original amount. The killer toxin of the type K1 of S. cerevisiae was adsorbed much better by glucans than by mannan.

Chitin synthesis and localization in cell division cycle mutants of Saccharomyces cerevisiae

1983 ◽  
Vol 3 (5) ◽  
pp. 922-930
Author(s):  
R L Roberts ◽  
B Bowers ◽  
M L Slater ◽  
E Cabib
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Cell Wall ◽  
Permissive Temperature ◽  
Wild Type ◽  
Chitin Synthesis ◽  
Specific Staining ◽  
Septal Region ◽  
Wall Components ◽  
Generalized Distribution

Growth of Saccharomyces cerevisiae cell cycle mutants cdc3, cdc4, cdc7, cdc24, and cdc28 at a nonpermissive temperature (37 degrees C) resulted in increased accumulation of chitin relative to other cell wall components, as compared with that observed at a permissive temperature (25 degrees C). Wild-type cells showed the same chitin/carbohydrate ratio at both temperatures, whereas mutants cdc13 and cdc21 yielded only a small increase in the ratio at 37 degrees C. These results confirm and extend those reported by B. F. Sloat and J. R. Pringle (Science 200:1171-1173, 1978) for mutant cdc24. The distribution of chitin in the cell wall was studied by electron microscopy, by specific staining with wheat germ agglutinin-colloidal gold complexes. At the permissive temperature, chitin was restricted to the septal region in all strains, whereas at 37 degrees C a generalized distribution of chitin in the cell wall was observed in all mutants. These results do not support a unique interdependence between the product of the cdc24 gene and localization of chitin deposition; they suggest that unbalanced conditions created in the cell by arresting the cycle at different stages result in generalized activation of the chitin synthetase zymogen. Thus, blockage of an event in the cell cycle may lead to consequences that are not functionally related to that event under normal conditions.

Nuclear behaviour and cell wall composition in relation to budding in mutants of the yeast Saccharomyces cerevisiae

1986 ◽  
Vol 64 (1) ◽  
pp. 193-200 ◽  
Author(s):  
Mario Lachapelle ◽  
E. Roger Boothroyd
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Wall ◽  
Spindle Pole ◽  
Minor Role ◽  
Temperature Sensitive ◽  
Yeast Saccharomyces Cerevisiae ◽  
Bud Emergence ◽  
Spindle Elongation ◽  
10 Nm Filaments ◽  
A Minor

A temperature-sensitive, cell division cycle mutant (cdc24–1) and karyogamy-deficient (kar1) mutant of Saccharomyces cerevisiae, both of which can produce binucleate or multinucleate cells, were used to study certain aspects of budding, after fluorescent staining for mannan, chitin, and nuclei (DNA). In most binucleate cells the two nuclei lay close together and divided into the same bud. In a few, however, the nuclei were far apart and one or two buds were formed, each proximal to a nucleus. The proximity of daughter nuclei in most blocked cdc24–1 cells suggests a role for the CDC24 gene product in spindle elongation. The relationship between the nuclei and the number and location of buds supports the theory of a preponderant role for the nucleus in budding. Although buds develop preferentially in regions of low chitin content in kar1 heterokaryons, the ability of cdc24–1 cells to bud even with a uniformly high content of chitin and mannan suggests a minor role for these cell wall constituents in determining the sites of bud emergence. The chitin ring is not needed for bud emergence but seems to play a role in normal bud development and in septum formation. Electron microscopy of cdc24–1 cells blocked (37 °C) for 8 h and released (23 °C) for 30 min showed morphologically normal spindle pole bodies, cytoplasmic microtubules, and intranuclear spindles. Although the chitin ring was absent, the ring of 10-nm filaments was present, consistent with its proposed role in bud emergence.

Sign in / Sign up

Export Citation Format

Share Document