scholarly journals Drosophila singed, a fascin homolog, is required for actin bundle formation during oogenesis and bristle extension.

1994 ◽  
Vol 125 (2) ◽  
pp. 369-380 ◽  
Author(s):  
K Cant ◽  
B A Knowles ◽  
M S Mooseker ◽  
L Cooley
Keyword(s):  
Sea Urchin ◽  
Actin Filament ◽  
Nurse Cell ◽  
Structural Integrity ◽  
Molar Ratio ◽  
Cell Nuclei ◽  
Cytoplasmic Actin ◽  
Filament Bundles ◽  
Filament Bundle

Drosophila singed mutants were named for their gnarled bristle phenotype but severe alleles are also female sterile. Recently, singed protein was shown to have 35% peptide identity with echinoderm fascin. Fascin is found in actin filament bundles in microvilli of sea urchin eggs and in filopodial extensions in coelomocytes. We show that Drosophila singed is required for actin filament bundle formation in the cytoplasm of nurse cells during oogenesis; in severe mutants, the absence of cytoplasmic actin filament bundles allows nurse cell nuclei to lodge in ring canals and block nurse cell cytoplasm transport. Singed is also required for organized actin filament bundle formation in the cellular extension that forms a bristle; in severe mutants, the small disorganized actin filament bundles lack structural integrity and allow bristles to bend and branch during extension. Singed protein is also expressed in migratory cells of the developing egg chamber and in the socket cell of the developing bristle, but no defect is observed in these cells in singed mutants. Purified, bacterially expressed singed protein bundles actin filaments in vitro with the same stoichiometry reported for purified sea urchin fascin. Singed-saturated actin bundles have a molar ratio of singed/actin of approximately 1:4.3 and a transverse cross-banding pattern of 12 nm seen using electron microscopy. Our results suggest that singed protein is required for actin filament bundle formation and is a Drosophila homolog of echinoderm fascin.

scholarly journals Structural organization of actin in the sea urchin egg cortex: microvillar elongation in the absence of actin filament bundle formation

1982 ◽  
Vol 93 (1) ◽  
pp. 24-32 ◽  
Author(s):  
DA Begg ◽  
LI Rebhun ◽  
H Hyatt
Keyword(s):  
Sea Urchin ◽  
Actin Filament ◽  
Actin Filaments ◽  
Calcium Ionophore ◽  
Ionophore A23187 ◽  
Acid Activation ◽  
Cytoplasmic Ph ◽  
Sea Urchin Egg ◽  
Filament Bundles ◽  
Filament Bundle

We have investigated the relationship between the formation of actin filament bundles and the elongation of microvilli (MV) after fertilization in sea urchin eggs. In a previous study (1979, J Cell Biol. 83:241-248) we demonstrated that increased pH induced the formation of actin filaments in isolated sea urchin egg cortices with the concomitant elongation of MV. On the basis of these results we suggested that increased cytoplasmic pH after fertilization causes a reorganization of cortical actin, which in turn provides the force for MV elongation. To test this hypothesis, we compared the morphology of microvilli in eggs activated with and without the release of fertilization acid. Activation of eggs in normal sea water with the calcium ionophore A23187 causes the release of fertilization acid and the elongation of MV containing core bundles of actin filaments. Eggs activated with A23187 in NA(+)-free water do not undergo normal fertilization acid release but develop elongated, flaccid MV. These MV contain an irregular network of actin filaments rather than the parallel bundles of filaments found in normal MV. The addition of 40 mM NaCl to these eggs results in the release of H(+) and the concomitant conversion of flaccid MV to erect MV containing typical core bundles of actin filaments. Identical results are obtained when 10 mM NH(4)Cl is substituted for NaCl. The induction of cytoplasmic alkalinization in unactivated eggs with NH(4)Cl does not cause either MV elongation or the formation of actin filament bundles . These results suggest that: (a) the elongation of MV is stimulated by a rise in intracellular free Ca(++) concentration; (b) actin filament bundle formation is triggered by an increase in cytoplasmic pH; and (c) the formation of actin filament bundles is not necessary for MV elongation but is required to provide rigid support for MV.

scholarly journals Actin filaments elongate from their membrane-associated ends

1981 ◽  
Vol 90 (2) ◽  
pp. 485-494 ◽  
Author(s):  
LG Tilney ◽  
EM Bonder ◽  
DJ DeRosier
Keyword(s):  
Plasma Membrane ◽  
Actin Filament ◽  
Actin Filaments ◽  
The Other ◽  
Dense Material ◽  
Thin Sections ◽  
Vacuole Membrane ◽  
Filament Bundles ◽  
Filament Bundle

In limulus sperm an actin filament bundle 55 mum in length extends from the acrosomal vacuole membrane through a canal in the nucleus and then coils in a regular fashion around the base of the nucleus. The bundle expands systematically from 15 filaments near the acrosomal vacuole to 85 filaments at the basal end. Thin sections of sperm fixed during stages in spermatid maturation reveal that the filament bundle begins to assemble on dense material attached to the acrosomal vacuole membrane. In micrographs fo these early stages in maturation, short bundles are seen extending posteriorly from the dense material. The significance is that these short, developing bundles have about 85 filaments, suggesting that the 85-filament end of the bundle is assembled first. By using filament bundles isolated and incubated in vitro with G actin from muscle, we can determine the end "preferred" for addition of actin monomers during polymerization. The end that would be associated with the acrosomal vacuole membrane, a membrane destined to be continuous with the plasma membrane, is preferred about 10 times over the other, thicker end. Decoration of the newly polymerized portions of the filament bundle with subfragment 1 of myosin reveals that the arrowheads point away from the acrosomal vacuole membrane, as is true of other actin filament bundles attached to membranes. From these observations we conclude that the bundle is nucleated from the dense material associated with the acrosomal vacuole and that monomers are added to the membrane-associated end. As monomers are added at the dense material, the thick first-made end of the filament bundle is pushed down through the nucleus where, upon reaching the base of the nucleus, it coils up. Tapering is brought about by the capping of the peripheral filaments in the bundle.

Structure of actin filament bundles from microvilli of sea urchin eggs

1979 ◽  
Vol 129 (2) ◽  
pp. 319-331 ◽  
Author(s):  
James A. Spudich ◽  
Linda A. Amos
Keyword(s):  
Sea Urchin ◽  
Actin Filament ◽  
Sea Urchin Eggs ◽  
Filament Bundles

scholarly journals A 45,000-mol-wt protein-actin complex from unfertilized sea urchin egg affects assembly properties of actin.

1984 ◽  
Vol 99 (3) ◽  
pp. 994-1001 ◽  
Author(s):  
H Hosoya ◽  
I Mabuchi
Keyword(s):  
Sea Urchin ◽  
Actin Filament ◽  
Actin Polymerization ◽  
Initial Rate ◽  
Gel Filtration ◽  
Molar Ratio ◽  
Capping Protein ◽  
Sea Urchin Egg ◽  
Rate Of Polymerization ◽  
Hemicentrotus Pulcherrimus

A one-to-one complex of a 45,000-mol-wt protein and actin was purified from unfertilized eggs of the sea urchin, Hemicentrotus pulcherrimus, by means of DNase l-Sepharose affinity and gel filtration column chromatographies. Effects of the complex on the polymerization of actin were studied by viscometry, spectrophotometry, and electron microscopy. The results are summarized as follows: (a) The initial rate of actin polymerization is inhibited at a very low molar ratio of the complex to actin. (b) Acceleration of the initial rate of polymerization occurs at a relatively high, but still substoichiometric, molar ratio of the complex to actin. (c) Annealing of F-actin fragments is inhibited by the complex. (d) The complex prevents actin filaments from depolymerizing. (e) Growth of the actin filament is inhibited at the barbed end. In all cases except b, a molar ratio of less than 1:100 of the 45,000-mol-wt protein-actin complex to actin is sufficient to produce these significant effects. These results indicate that the 45,000-mol-wt protein-actin complex from the sea urchin egg regulates the assembly of actin by binding to the barbed end (preferred end or rapidly growing end) of the actin filament. The 45,000-mol-wt protein-actin complex can thus be categorized as a capping protein.

Sorting of actin isoforms in chicken auditory hair cells

1997 ◽  
Vol 110 (6) ◽  
pp. 765-770 ◽  
Author(s):  
D. Hofer ◽  
W. Ness ◽  
D. Drenckhahn
Keyword(s):  
Actin Filament ◽  
Hair Cells ◽  
Auditory Hair Cells ◽  
Actin Isoforms ◽  
Cytoplasmic Actin ◽  
Beta Actin ◽  
Nonmuscle Cells ◽  
Filament Bundles ◽  
Actin Isoform ◽  
Cellular Compartments

Most nonmuscle cells of higher vertebrates contain two different actin isoforms, beta- and gamma-cytoplasmic actin. The beta-isoform is with few exceptions the predominant isoform in nonmuscle cells and tissues. Perturbation of the beta:gamma ratio has been shown to affect the organization of bundled actin filaments indicating that the beta- and gamma-genes encode functionally distinct cytoarchitectural information. In the present study we localized by immunostaining beta- and gamma-actin in chicken auditory hair cells. These highly specialized cells serve as model system for studying certain developmental and structural aspects of a complex actin filament system with high architectural precision. We show that gamma-actin is the predominant actin isoform in auditory hair cells with an apparent beta:gamma ratio of approximately 1:2. gamma-Actin is not sorted and occurs in all three actin assemblies of the hair border, i.e. the cores of sensory hairs (stereocilia), the subjacent gel-like actin filament meshwork (cuticular plate) and the zonula adherens ring. In contrast to gamma-actin, the beta-isoform is specifically sorted to the actin filament core bundle of stereocilia that is extensively crosslinked by fimbrin. In view of recent studies showing that L-plastin, the leukocyte homolog of fimbrin, has a higher binding affinity for beta-actin than for gamma-actin, a mechanism is proposed for how hair cells might restrict formation of actin filament bundles to a single cellular site (i.e. the stereocilia). The limited level of expression of beta-actin in hair cells may help to prevent ectopic bundle formation in other cellular compartments.

scholarly journals Palladin Is a Regulator of Actin Filament Bundles at the Ectoplasmic Specialization in Adult Rat Testes

Endocrinology ◽  
2013 ◽  
Vol 154 (5) ◽  
pp. 1907-1920 ◽  
Author(s):  
Xiaojing Qian ◽  
Dolores D. Mruk ◽  
Elissa W. P. Wong ◽  
Pearl P. Y. Lie ◽  
C. Yan Cheng
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Plasma Membranes ◽  
Permeability Barrier ◽  
Protein Distribution ◽  
Filament Bundles ◽  
Ectoplasmic Specialization ◽  
Blood Testis Barrier

Abstract In rat testes, the ectoplasmic specialization (ES) at the Sertoli-Sertoli and Sertoli-spermatid interface known as the basal ES at the blood-testis barrier and the apical ES in the adluminal compartment, respectively, is a testis-specific adherens junction. The remarkable ultrastructural feature of the ES is the actin filament bundles that sandwiched in between the cisternae of endoplasmic reticulum and apposing plasma membranes. Although these actin filament bundles undergo extensive reorganization to switch between their bundled and debundled state to facilitate blood-testis barrier restructuring and spermatid adhesion/transport, the regulatory molecules underlying these events remain unknown. Herein we report findings of an actin filament cross-linking/bundling protein palladin, which displayed restrictive spatiotemporal expression at the apical and the basal ES during the epithelial cycle. Palladin structurally interacted and colocalized with Eps8 (epidermal growth factor receptor pathway substrate 8, an actin barbed end capping and bundling protein) and Arp3 (actin related protein 3, which together with Arp2 form the Arp2/3 complex to induce branched actin nucleation, converting bundled actin filaments to an unbundled/branched network), illustrating its role in regulating actin filament bundle dynamics at the ES. A knockdown of palladin in Sertoli cells in vitro with an established tight junction (TJ)-permeability barrier was found to disrupt the TJ function, which was associated with a disorganization of actin filaments that affected protein distribution at the TJ. Its knockdown in vivo also perturbed F-actin organization that led to a loss of spermatid polarity and adhesion, causing defects in spermatid transport and spermiation. In summary, palladin is an actin filament regulator at the ES.

The capactins, a class of proteins that cap the ends of actin filaments

1982 ◽  
Vol 299 (1095) ◽  
pp. 263-273 ◽  
Keyword(s):  
Skeletal Muscle ◽  
Actin Filament ◽  
Actin Filaments ◽  
Muscle Cells ◽  
Preliminary Evidence ◽  
The Other ◽  
Cellular Regulation ◽  
Filament Assembly ◽  
Filament Bundles

A number of proteins that bind specifically to the barbed ends of actin filaments in a cytochalasin-like manner have been purified to various degrees from a variety of muscle and non-muscle cells and tissues. Preliminary evidence also indicates that proteins that interact with the pointed ends of filaments are present in skeletal muscle. Because of their ability to cap one or the other end of an actin filament, we have designated this class of proteins as the ‘capactins’. On the basis of their effect on actin filament assembly and interaction in vitro , we propose that the capactins play important roles in cellular regulation of actin-based cytoskeletal and contractile functions. Our finding that the disappearance of actin filament bundles in virally transformed fibroblasts can be correlated with an increase in capactin activity in the extracts of these cells is consistent with this hypothesis.

scholarly journals Organization of actin in the leading edge of cultured cells: influence of osmium tetroxide and dehydration on the ultrastructure of actin meshworks.

1981 ◽  
Vol 91 (3) ◽  
pp. 695-705 ◽  
Author(s):  
J V Small
Keyword(s):  
Electron Microscopy ◽  
Actin Filament ◽  
Actin Filaments ◽  
Osmium Tetroxide ◽  
Cultured Cells ◽  
Leading Edge ◽  
Cultured Fibroblasts ◽  
Cell Biol ◽  
Filament Bundles

The ordered structure of the leading edge (lamellipodium) of cultured fibroblasts is readily revealed in cells extracted briefly in Triton X-100-glutaraldehyde mixtures, fixed further in glutaraldehyde, and then negatively stained for electron microscopy. By this procedure, the leading edge regions show a highly organised, three-dimensional network of actin filaments together with variable numbers of radiating actin filament bundles or microspikes. The use of Phalloidin after glutaraldehyde fixation resulted in a marginal improvement in filament order. Processing of the cytoskeletons though the additional steps generally employed for conventional electron microscopy resulted in a marked deterioration or complete disruption of the order of the actin filament networks. In contrast, the actin filaments of the stress fiber bundles were essentially unaffected. Thus, postfixation in osmium tetroxide (1% for 7 min at room temperature) transformed the networks to a reticulum of kinked fibers, resembling those produced by the exposure of muscle F-actin to OsO4 in vitro (P. Maupin-Szamier and T. D. Pollard. 1978. J. Cell Biol. 77:837--852). While limited exposure to OsO4 (0.2+ for 20 min at 0 degrees C) obviated this destruction, dehydration in acetone or ethanol, with or without post-osmication, caused a further and unavoidable disordering and aggregation of the meshwork filaments. The meshwork regions of the leading edge then showed a striking resemblance to the networks hitherto described in critical point-dried preparations of cultured cells. I conclude that much of the "microtrabecular lattice" described by Wolosewick and Porter (1979. J. Cell Biol. 82:114--139) in the latter preparations constitutes actin meshworks and actin filament arrays, with their associated components, that have been distorted and aggregated by the preparative procedures employed.

scholarly journals The changes in structural organization of actin in the sea urchin egg cortex in response to hydrostatic pressure.

1983 ◽  
Vol 97 (6) ◽  
pp. 1795-1805 ◽  
Author(s):  
D A Begg ◽  
E D Salmon ◽  
H A Hyatt
Keyword(s):  
Hydrostatic Pressure ◽  
Sea Urchin ◽  
Actin Filament ◽  
Structural Organization ◽  
Cleavage Furrow ◽  
Cortical Actin ◽  
Cleavage Division ◽  
Sea Urchin Egg ◽  
Filament Bundles ◽  
Egg Cortex

We have used hydrostatic pressure to study the structural organization of actin in the sea urchin egg cortex and the role of cortical actin in early development. Pressurization of Arbacia punctulata eggs to 6,000 psi at the first cleavage division caused the regression of the cleavage furrow and the disappearance of actin filament bundles from the microvilli. Within 30 s to 1 min of decompression these bundles reformed and furrowing resumed. Pressurization of dividing eggs to 7,500 psi caused both the regression of the cleavage furrow and the complete loss of microvilli from the egg surface. Following release from this higher pressure, the eggs underwent extensive, uncoordinated surface contractions, but failed to cleave. The eggs gradually regained their spherical shape and cleaved directly into four cells at the second cleavage division. Microvilli reformed on the egg surface over a period of time corresponding to that required for the recovery of normal egg shape and stability. During the initial stages of their regrowth the microvilli contained a network of actin filaments that began to transform into bundles when the microvilli had reached approximately 2/3 of their final length. These results demonstrate that moderate levels of hydrostatic pressure cause the reversible disruption of cortical actin organization, and suggest that this network of actin stabilizes the egg surface and participates in the formation of the contractile ring during cytokinesis. The results also demonstrate that actin filament bundles are not required for the regrowth of microvilli after their removal by pressurization. Preliminary experiments demonstrate that F-actin is not depolymerized in vitro by pressures up to 10,000 psi and suggest that pressure may act indirectly in vivo, either by changing the intracellular ionic environment or by altering the interaction of actin binding proteins with actin.

Sign in / Sign up

Export Citation Format

Share Document